156 models
Drew up and created a 3D, multi-color, version of the classic 90s cartoon Teenage Mutant Ninja Turtles logo. Printed with Hatchbox Red, White, and Green and Prusament Galaxy Black PLA filaments. Drawn in Affinity Designer, imported as a…
Off Duty in the Outer Rim : Leia's teenage Grunge Band “No Krew Remains” The blaster fire faded, but the echoes of captivity lingered, a cold, metallic tang that clung to Leia long after her escape. Publicly, she was the picture of regal…
This model is designed to replace the speaker grill on the KOII portable sampler manufactured by Teenage Engineering. I am particularly fond of the orange accents on the machine and sought to replicate them. I printed this component using…
Wanted to hang my OB4 on the wall
Krang : Teenage Mutant Ninja Turtles
Kraang Rifle : Teenage Mutant Ninja Turtles
MICHELANGELO TMNT REMIXED
Raphael (Teenage Mutant Ninja Turtles) support removed from original
LEONARDO TMNT REMIX
Donatello re-mixed
Updated 20230615 Someone said the "1.1 Part-Shell-Front" is too tight to insert into the body, so I modified it, you can try the new part now. ____________________________ Updated 20230605 I separated the body into 2 parts, now it is…
hi there! This is a case i designed for my own use for my pocket operator but figured others might have a good time using it too! Requires: 2x M3x4x5 brass heated inserts - link 2x M3x5mm bolts - link Print settings: I used a 0.2mm nozzle…
Huge thank you to Printables user soozafone for creating Lucky 13 . You will need the Lucky 13 armature and skin. You will also need the Body v2.stl from RxR 's multi joints for Lucky 13 model. Assembly of the head is pretty…
This model prints best with a resin 3d-printer but works also with FDM. Cowabunga! Juri
All four Teenage Mutant Ninja Turtles
A stand to raise the Teenage Engineering KO II sampler to a more comfortable 10°-20° incline. Slotted pegs insert into pre-existing holes in the KO II for a snug, removable press-fit (depending on your printer tolerance). There are three…
Bobblehead from a scan of a classic TMNT figure for use with 3D Printy's bobble head spring and base Files for spring and base can be found here: https://www.printables.com/model/224836-emoji-printer-bobbleheads Print Settings I used…
This is a printable replacement of the volume knob for the Teenage Engineering OP-Z. Print material: PLA, PETG, ABS Print several at once to improve cooling and reduce the layer time per part. Remove the old volume knob. For reassembly…
This design is a 3d model of the classic Teenage Mutant Ninja Turtles manhole logo as well as the newer TMNT style. The prints are separated by color and everything should press-fit together. The only part that might need supports is the…
Choose a color for the mask, one layer of red for tongue, the last layers for mask (in any of the colors).
a like is not a crime ;) Enjoy the Teenage Mutant Ninja Turtles Sewer Diorama / Playset it fits perfect for the IKEA Billy shelves its 760mm lenght 260mm deep 270mm high use 3x10 screws for floor /walls and 3x15 for walls /walls have fun
Some stuff for the Teenage Mutant Ninja Turtles Sewer Diorama / Playset All wall decorations have a “click” system for the walls all multilcolor parts printed on the bambulab a1 mini with ams lite - sorry for that prusa! for a nicer…
Not my model, just remodeled/reuploaded to be printable with multiple colors Uses 5 colors Teenage Mutant Ninja Turtle for multi-colored FDM printing. Original Artist info: Teenage Mutant Ninja Turtle for 3d printing. Help me keep doing…
hey hoy- lets go … set 2 including: cctv + wall mount small Table wall mountable basketball pipe system + wall mount bar stool wall lights one cord + two cord enjoy it
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Teenage Mutant Ninja Turtles Use any color for the turtle that you would like. (Including the baby blue for the girl turtle for true fans, even if that series was the worse one made). I print all my earrings and keychains with a .2…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
A ninja-like turtle that may be the teenage equivalent in the species. Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
my variations of the tmnt heroes and allies
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
A full size hard case/travel case for the teenage engineering op-1 with a replica op-1 layout on the top, includes a side panel to allow access to the headphone and charging ports while in the case and has the option to embed 5mm magnets.…
Enjoy the Teenage Mutant Ninja Turtles Sewer Diorama / Playset it fits perfect for the IKEA Billy shelves its 360mm lenght 260mm deep 270mm high use 3x10 screws for floor /walls and 3x15 for walls /walls have fun
Same outer dimensions as the original knobs on the KO II. This knob fits the slider without using unnecessary force. This model is tried with PLA on a Prusa Mini. Printed with 0.2mm layer height, 15% infill, Prusament PLA Galaxy Silver.…
ko II 2 ep 133 teenage engineering Battery Cover in prusa slicer its easy to add text. embossing etc this is a first pass. tolerances could be better. size is slightly off. It fits though. Ill circle back and update slightly at some…
I have no affiliation with Teenage Mutant Ninja Turtles or their creator / copyright holder. I am just a fan. I have create a 3d turtles log which should be printed in four different colours using a 'filament in cura'. Start off with…
This BUST can be upgraded into a full Ziptie action figure. Here is an assembly video for reference: 3D PRINTED TEENAGE MUTANT NINJA TURTLE ACTION FIGURES NEW - YouTube
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Replacement fader knob that fits the full length of the stem and rests on the EP-133. You might have to adjust the X and Y scale a little to get it to fit perfect. I was at 102% in prusaslicer for a perfect fit.
This is a remix of my Sharpie Guy entry into the Sharpie Mod contest. This was so much fun to make, especially the nunchucks. I printed the arms, legs and shells at a speed of 100, with a resolution of 0.2 mm and everything else at a…
I originally printed these on a Prusa i3Mk3s+ using PET-G at 30, draft mode, with 25% infill (Support cubic). You can try printing at 15 or 20 detail mode, as you like. (It's a pretty big print, so draft works fine imho.) Designed in…
I wanted a cover/protector for the EP-133 so I can throw it in a bag for travel. I grabbed the official bag from TE, but it's a soft bag, so I made a cover to go along with it to protect the fader and knobs from crush damage. My design…
a upscaled Sewer Party Tube i printed the net and the net_holder with tpu for all other parts i printed pla
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
12cm vysoký Teenage Mutant Ninja Turtles - Donatello
This is a remix of a few different files to create a TMNT inlay into my favorite storage box as a toy box for my son. The original box can be found here: https://www.printables.com/model/71007-small-parametric-tool-box/files Some parts of…
Stand is 2 models, 5 prints. It utilizes m4 hardware. So you will need M4x6mm flat head screws and I used M4 heat inserts 6mm diameter and 4mm long. You can add rubber bumpers as needed but it has been working fine for me without any.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I love my TE OP-Z so much but accessory for it is currently limited. So I made this model in hope it could help people easily make more accessory for it.
This is a hard case for the Teenage Engineering Pocket operator series. Needed something to protect the synth while traveling (this case have been tested in rough conditions(i.e. my wife's handbag)). At the same time I prefer playing on…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
12 cm vysoký Teenage Mutant Ninja Turtles - Raphaelo
This TMNT comic book stand backing can slide into a comic book stand that allows for backing/plate changes and can also be hung on the wall and used as wall art. If you are obsessed with Teenage Mutant Ninja Turtles then I think you'll…
Hello, Today I have Ninja Turtles for you. My kids love these characters and I love coloring them. Interesting look. For proper functionality, you need to use a Print Profile! I used PLA/PETG as the material. You need to use supports!!!…
Hello, For all fans of TMNT ! You need an AMS to print this.
The EUROTEN is a mounting frames to mount Teenage Engineerings’ Pocket Operators™ into the Eurorack. No screws Only the frame need to be screwed into the Eurorack. There are no screws required to mount the Operators into the frame. They…
For commercial license subscribe to my Patreon or Printables Club ! https://Patreon.com/Plastic3D Meet the SpringBlossom Dragon, a fully articulated, beautifully detailed model available in three versions: Adult, Teenage, and Baby!…
A new 3D figurine generated by AI, a cool skeleton teenager. Do not forget to LIKE, to download and to upload your makes, thanks ! Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Having bought this case I was immediately disappointed by the lack of core functionality. This case in its stock configuration is an oven for your computer components, the GPU is starved for air, as is the CPU. So I designed these…
I liked the thought behind the original sign. I made a change to the wording and to the Warning part of the sign. The sign can be printed on an MMU or as a color print on a regular printer. The MMU version is set up to print face down on…
Replacement knob for the teenage engineering OP-1 daw. Should also be compatible with the MK4 if you want to slap an OP-1 style knob on there. Print with organic supports and also ensure that the perimeter generator is set to Arachne…
This is a remix of the excellent model from Salvation76.......added 19mm to the length.
Avoid the tragedy! I love the minimalist design of pocket operator, but found the hard way that LCD can easily crack without protection (see the leftmost PO-28 Robot). I've modified @ProteanProjects and @Randy1177 great friction-fit…
A very small, neat case for the love of your life, your Teenage Engineering OP-Z. Sliding removable lid, with spaces for optional magnets. Prints in PLA - no flexibility required. I wanted something that barely increased the OP-Z size at…
Ein Gehäuse für den Teenage Engineering Pocket Operator im klassischen vintage Synthesizer design. Hinweis : Für das Einsetzen der Pocket Operator in das Gehäuse, muss der PO Hanger restlos entfernt werden. Rückstände müssen evtl.…
ko II 2 ep 133 teenage engineering technic Stand Simple stand for the 133. these are 240mm long. this is very large for a 3d printer. my printer tops out at 180mm so dimensional accuracy is hard to verify. Technic pins are difficult to…
I printed with a brim, which connected the buttons. I snipped off the edges of the brim to fit the case and insert the buttons like that
Stand for the Teenage Engineering “OP” line of synths. Works on a desk or in your lap, and is designed for use with: OP-1 OP-1 Field OP-XY (retains access to the pitch bend controller) The minimum angle is 20º and supports larger angles…
I made this minimalist cover to protect flimsy power switch of the OP-Z. Note: use thin paper tape inside the cover to provide more friction and protect the OP-Z from scratch.
This is an insert designed for the base game of Unmatched Adventures: Teenage Mutant Ninja Turtles, the Extra Toppings miniatures, and the Shredder and Krang hero decks. The sleeves I used are Dragon Shield Matte Clear Standard Size…
small and rounded fader knob I quickly drew up for my new calculator. I printed it with a Bambu lab A1 with the 0.2mm nozzle with 0.1mm layers and 3 perimeters, 15% infill. less probably feasible. fits perfectly without any post…
KO II Shelf - Teenage Engineering EP-133 Show off your beautiful KO II on this secure, wall mounted shelf. Prints without support in the provided orientation. Slot locks the KO II in position so it wont slip out. Attach to any surface…
Suchst du nach einem stilvollen und robusten Gehäuse für deinen Teenage Engineering Pocket Operator? Dann ist unser MONOLITH SLIM genau das Richtige für dich! Dieses hochwertige, 3D-gedruckte Gehäuse aus PETG sieht nicht nur gut aus,…
Teenage Mutant Ninja Turtles Lightbox I didn't care for the TMNT lightboxes I found on here, so I made my own. 8 Colors. Like most of my lightboxes it has a short top and tall bottom. I have also included 2 ways to load the files. STLs…
A replacement keycap for the teenage engineering EP-133 and EP-1320 sampler.
This birdhouse combines clean Scandinavian design principles with ornithological research to create a functional, minimalist home for small cavity-nesting birds like chickadees, nuthatches, and titmice. Design Features: Dimensions:…
Caution Moody Teenager Keychain
For commercial license subscribe to my Patreon or Printables Club ! https://Patreon.com/Plastic3D This Easter, hatch your own dragon ! 🥚✨ This articulated, print-in-place dragon come in three sizes—Baby, Teen, and Adult—each with smooth…
Simple cheeks for the 133. Nice to add a splash of color to this sampler. these are 240mm long. this is very large for a 3d printer. my printer tops out at 180mm so dimensional accuracy is hard to verify. Technic pins are difficult to…
a quote from my favourite movie
*Donating to access the files through my Ko-Fi supports me and enables me to dedicate more time and energy to creating for the community. These files are also available for free on Thingiverse with the option to donate if you like them*…
12cm vysoká teenage mutant ninja turtle
Vtipná cedulka na dveře vašeho puberťáka 3MF soubory jsou určeny pro MMU, AMS a ERCF a jiné vícebarevné systémy.
12cm vysoký Raphaelo
Take this if you don't want to break your original placeholder module
designed on fusion 360 from svg.. can be make on a mmu machine or single with each file i provide. i can also make stands for any lightbox now live or in the future. custom ones can be requested and ill be sure to add them on :D 3D…
my variations of the tmnt villains and enemies
The Teenage Engineering Pocket Operator is a pretty cool device. And in my opinion does not lack in anything, except for some type of button lock. Made this shell to prevent the PO to start playing unintentionally in my pocket, which…
I had some plates for another speaker and measured all the dimensions and replicated the cover plates. The first prototype I made had printed the inner pegs that the soft TPU or TPE bumpers go on, but they are 3.2mm and snap off easily,…
It is a tool to simplify the usage of the OPZ (from teenage engineering) with one hand. Category: Music
Celebrate your love of TMNT with this Hueforge of the first issue's wraparound cover! Print using a 0.4mm nozzle at 100% infill with a layer height of 0.12mm and a base layer of 0.2mm Filaments Used: PLA BambuLab Basic Black Transmission…
Regal Prop Shop fabricated some of the TMNT weapons from the 2023 movie, Teenage Mutant Ninja Turtles: Mutant Mayhem. Now, you can download, print, assemble and paint your own with these files! Watch the full BTS video of how we built and…
*Please like it if you like it - because it‘s free for you, but prusa thanks it with some new Filament - which i use to test and improve my Models… Pocket Operator Rugged Case Protect your Teenage Engineering Pocket Operator with this…
This is the coolest action figure of ninja turtles. It features many joints, including butterfly joints, torso rotation, and a posable bandana. Please enjoy printing and playing with this awesome model for free. These models are just…
A MINI COMIC STRIP FEATURING THE RENOWNED AND BELOVED TEENAGE MUTANT NINJA TURTLES. GREAT FOR LOVERS OF GEEK CULTURE 🤓 IDEAL FOR SETUPS, BEDROOMS, DESKS, SHELVES... I'M NEW HERE, MY NAME IS EZEQUIEL. I'M FROM BRAZIL. I HOPE YOU LIKE IT.…
After I bought the EP-40 "Riddim", I now had three Teenage Engineering EP units, and had a new problem on my hands, storing them in such a way that I can access them quickly. Hence this design, inspired from banquet or conference…
TMNT: The Four Brothers HueForge Bring the iconic heroes in a half-shell to your wall with this high-detail HueForge print. Featuring Leonardo, Michelangelo, Donatello, and Raphael in a classic four-paneled comic style, this piece…
The case is designed to utilize the foam from the original OP-Z packaging. Hopefully, you’re a bit of a hoarder and save your gear boxes like me. I printed some thin shims to fit between the foam and the side wall, making the OP-Z a bit…
