43 models
V6 2024-03-25 New design with a outer ring for better performance V5 2024-03-xx First release
Print approx. €1.11–€1.35 excl. taxPreliminary estimate for one variant
This is designed to fit this frame: And fit over my GPS mount rev 2
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for one variant
Kleines Tool das gut in die Tasche passt, wenn man nicht gerade das Multitool dabei haben möchte und die Muttern nicht stark verkratzt. Empfohlen wird der Druck mit PLA und min. 4 vertikalen Konturhüllen damit das Tool ausreichende…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
Na cedulce posunete ukazovátko na den, kdy jste rostlinu naposledy zalili. English version: https://www.prusaprinters.org/cs/prints/61685-tag-with-an-indicator-of-the-last-watering bez ukazatele:…
Print approx. €0.46–€0.57 excl. taxPreliminary estimate for one variant
náhradní rychloupínák na patu telemarkového vázání, odpovídající modelu G3. přidán lehce upravený model po zkušenostech s používáním (větší vykrojení + posun otvoru na drát) ** spare quick release on the heel of the telemark binding,…
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for PETGSource material: PET
Stumbling over @maxi_1408247's ski set pushed me to print it, and a DUMMY 13 . When I showed it to a friend that's into Telemark, the immediate response was that a Telemark variant was needed. Since DUMMY 13's original foot already has an…
print orientation as it comes from the STL, ASA or ABS recommend for temperature stability
This is a decoy heart telemetry tool for nursing and pre-med students. The parts are broken into different pieces so that different colors can be used to make the decoy more realistic. Lightly sand any area that will be glued together…
This is an Custom Pickguard for my "Squier Paranormal Offset Telecaster". Mine came with an Singlecoil Telecaster Neck pickup and an pickguard for that but the Body is already routed for Humbucker in Neck and seemingly up to Strat…
Modell des Hamburger Fernsehturms "Telemichel" Gesamthöhe 276,5m
printed without supports in PETG, but PLA will probly be fine
Introdução ao design 3d: Suporte de telefone da cadeira DI3D. OpenSCAD file is available and easy to print. 35g , 3horas 55 minutos
Laptop mount for SiK Telemetry Radio V3: Self-clamping for a width of 5,5mm. I use it for my Ground Control Station on a Lenovo T450 Laptop.
Print as oriented with no supports. Board will slide in. Small dab of hot glue can be used to retain if loose.
Similar pieces are available at: https://www.prusaprinters.org/prints/138194-telemark-binding-heel-throw https://www.thingiverse.com/thing:3340176 for different brands of bindings.
a clip mount for the sik telemetry, currently for the version for Holybro and mro sik telemetry,
This is a 3D sketch of a Rottefella binding heel throw. It is designed from a "Cobra binding" but it is apparently the same for any N75 binding from Rottefella: Cobra, Riva, Chili, ... It may be adapted for different brand. Check out on…
Suporte de telemóvel para secretária ou mesa cabeceira. Opção com nome ou normal.
A practically fully 3D printed rocket designed for Estes F15-6 motors for my university telemetry project. The rocket includes a payload bay with a custom telemetry sled that can easily be modified for whatever electronics you'd like to…
Bei diesem Modell handelt es sich um ein Ersatzteil für eine Dusche mit Wandstange, bei dem der Duschkopf variabel eingestellt werden kann. In die Duschhalterung passen zum Beispiel alle gängigen Duschköpfe (Ø 22 mm) aus dem Baumarkt…
This case will hold the Eggtimer Ion Flight Computer, Telemetry Module, and Battery. Eye loops for Kevlar tether and thin wafers to separate the boards and battery. Hole to pass the telemetry antenna and vents for the baro sensor. Need:…
This is the 2019 version of my ski touring binding, tested this winter, and still compatible with the "Dynafit Radical". The evolution compare the previous version (V1 on thingiverse) is a stronger crampon holder, using the part included…
Halter für Vspeak Telemetrie Adapter. Supports mit 0.5mm Abstand zum Bauteil. Holder for Vspeak telemetry adapter. Supports with 0.5mm distance to the component. Print Settings Printer Brand: Artillery Printer: Artillery Sidewinder X1…
Krytka matice kola TIR s ukazatelem povolení. M32. Materiál PET G, ABS, ASA.
For mount the #6555 to the newest Slash BL-2s version
TELEMARK SKI TOURING BINDING FITTING "PLUM guide" TECH BINDING I am happy to share my telemark ski touring binding, tested for 2 winters, and compatible with the "PLUM guide" front Pins binding unit. The telemark cable is removable for a…
Replacement mount for the Geotab telematics FOB reader, commonly used in fleet vehicles. I've tested the model in both FDM (PLA) and Resin (ABS Like), model doesn't require supports.
I only have a Arduino Nano with headers soldered on ATM so I have to expose it to keep the design compact, in next update, I will update the cover to hide the controller For the best result, use 2 color print, either AMS or: Print the…
Soporte diseñado para montar una tercera pantalla auxiliar en rigs de sim racing, ideal para mostrar telemetría, datos de carrera, standings, mapas o dashboards durante sesiones de práctica o competencia. El diseño cuenta con un brazo…
I have built a mobile phone holder for my FRSky TARANIS in order to use telemetry with my hexacopter and my mobile phone. For my galaxy S4 I have used a comercial case joined to the printed piece with double face adhesive band. The arms…
Custom holder for the Telemaster™ Modular Plug Crimp Tool. Can be mounted directly on the wall, or to a pegboard with 12mm grid. How I Designed This I design my tool holders for fast printing and with tight tolerances. A well calibrated…
This insert is mirrored from the original to maximize room for a wireless sensor (any) to remotely monitor humidity levels with one of any number of wireless sesnors integrated with your smarthome/IOT system. There are 4 heatset insert…
This telemark home trainer was designed during the first Coronavirus confinement to keep fit at home. Bill of material: 8x 608 ball-bearing (the same one as used in rollers) 8 tires to be printed in soft material, here Filaflex 82A 2…
Focus gear adapter for Meyer-Optik Görliz Telemegor 1:5.5 / 180 mm . It is recommended to print it out of flexible filament (e.g. TPU ). The inner gear totally reflects the lens focus wheel, the output gear is on 0.8 (module) standard for…
VTX assembly is made for CADDXFPV Avatar Pro HD system. Camera/telemetry mount is designed around a BNO-055 IMU, RP2040-RFM69. I've included a standard M100 GPS version, as well as a M100 Mini version. I had better luck getting a signal…
safety caps for old telemecanique button
=================================================================================== 📐 PAK-TOR 3D Labs | CNC 3-Axis Enclosure Mechanics & Telemetry - FREE PACK…
Designed to go below your heal paired with telemark ski bindings. Print in a weather resistant material for optimal results.
DIY Automotive-Style PC Telemetry Gauge Cluster — Arduino CPU, RAM & GPU Turn your PC's live performance data into a physical automotive-style dashboard! This project uses three analog-style needle gauges to display CPU usage, RAM usage,…
Focus gear adapter for Meyer-Optik Görliz Telemegor 1:5.5 / 180 mm . It is recommended to print it out of flexible filament (e.g. TPU ). The inner gear totally reflects the lens focus wheel, the output gear is on 0.8 (module) standard for…
![Telebox--Heart Telemetry Simulation Tool [with Clipping Leads]](https://media.printables.com/media/prints/30278/images/301017_4f9104b0-c541-4711-99d9-ba57f18c9180/telebox-5-lead-v3.png)
![Suporte Telemovel [ Regina Name ]](https://media.printables.com/media/prints/849148/images/6556376_931ea017-b6f3-4e40-9d51-282602a99ce4_6d351713-7246-4262-bc5e-6d9f5ee7d52c/suporte-telemovel-com-nome.png)
