Counting matching models…
When I built my custom bear I couldn't find any mount for my BTT TFT24 screen, so I drafted one. This is not my favorite design ever, but it works well, and it is easy to print. If there is demand, I'll modify my design however it is…
I'm not sure if maybe they changed the board design of the TFT24 but the original case by @sdedux over at thingiverse did not fit my display. The reset button was off by a couple of millimeters and so i hat to slightly modify the case for…
I trimmed down the original hackemag model a bit to reduce print time and material, and also made a mount for the OpenBuilds 2020 profile. The result is a thin, slim design that illuminates the surface below. Use 4 small M3 screws (6mm)…
Lerdge screen to BTT TFT2.4 converter.
A dimensional cad to integrate the BigTreeTech display into an custom enclosure. Reference at: https://biqu.equipment/products/tft24v1-1-gd-version?_pos=9&_sid=7a6ef3e8b&_ss=r If you want to support me, you can buy me a coffee 😊…
I like the original by scedux, but want a couple changes for mounting and viewing angle. Then I cleaned up the model and made it easier to print. Turned out great! Print Settings Printer: SainSmart Coreception Rafts: No Supports: No…
Je potřeba 4x matice M3 a 4x Šroubek se zápustnou hlavou M3x18
Updated my SKR 1.3 with this new dual-use (touch and lcd) TFT screen to allow the best of both worlds in one screen :D. 23/Aug/2020 - Updated Stand and Cover to v2, this version adds support to fix to aluminium profile, nut to clamp both…
Hi, This is a remix of Steffenbodekaer case for the TFT 24 from big tree tech. I used the V1.1 of the TFT24. Post-Printing you will need : 2X M5x15 screws (to attach the case to the printer) 3X M3 insert (link below) 3X M3x12 CHC screws…
This is a work in progress (V1 untested) 15-April-2019 Corrected some missing levels icons of the TFT and added an emergency Stop in the custom menu to use when working with Octoprint. 3-April-2019 Move the MKS Main Board up to 4.2mm so…
This is a reupload request from someone who needed this model. This model I downloaded 3 years ago from Thingiverse and it seems that the original model isn't there anymore.
Several months ago, I have designed this BigTreeTech TFT24 enclosure. It fit for Anycubic Kossel Linear Plus or for any 2020 profile.
Remix TFT the original https://www.thingiverse.com/thing:5436888
I have remixed EugenioFructuoso's model filling the little hole. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.2 Infill: 20 Filament: BQ PLA White Category: 3D Printer Parts
This is Anycubic Kossel Linear Plus Full LCD case for bigtreetech tft24. This thing enables to cover entire front of printer. Print LCD case left mirrored to get right side Category: 3D Printer Accessories
This is a simple mount for the Bigtreetech TFT24 v1.1 Case by Jinhyuk. Whith this mount it can be easily attached to the front a P3Steel Frame. Print Settings Printer: A8Steel 32x Custom Rafts: Doesn't Matter Supports: Doesn't Matter…
This is a mount for the BigTreeTech TFT24 display, designed to work with the BigTreeTech TFT24 display case . It mounts where the old LCD panel would be and covers most of the opening that would've been left. When printing the TFT 24…
Needed to remix this part to fit on the mounting holes of the Select Mini v3/Pro and cut a corner out so the y-carriage would not crash into it. Not perfect but mounts and works well. Category: 3D Printer Parts
This model was used to facilitate the replacement of my Monoprice Select Mini's screen with the BTT TFT24. I used a small saw to cut material from the side of the printer to allow for SD card access, and on the opposite side of the…
Remixed from the original top mount display holder to use M3x6x5 embedded nuts for the case bolts and cleaned up various mesh issues I found. The original version of the backplate had some mesh issues that made it print very weakly, so…
This 3D model is a precision-designed enclosure panel built to house a TFT24 touchscreen display, commonly used in Ender-series 3D printers. The layout includes a large central rectangular cut-out for the screen, flanked by circular holes…
This allows you to use the slim and elegant tft24 case with the display mount arm by RomRider. Original display case design by https://cults3d.com/en/users/3DED available at…
Edited 09Aug20: Added a plastic backplate to drill and attach the main assembly to--use this if you're missing the metal backplate. Note: I haven't tested this, because I have a metal backplate. Edited 21Sep19: I added pictures of where I…
BIGTREETECH TFT24 V1.1 Graphic Smart Display Enclosure. Category: 3D Printers
A slightly modified version of Bigtreetech TFT24 v1.1 Angled case from skedux ( https://www.thingiverse.com/thing:3966593 ) that fits the ender 3 aluminum profile. Category: 3D Printer Accessories
Adapter to fit Bigtreetech TFT24 V1.1 screen to CR-10S Pro. Running in LCD 12864 mode with TH3D Adapter board. Clips into existing screen opening. SD slot is for updating screen only. I will be uploading an adapter for the TFT35 screen…
Updated version with aluminum profile tilt holder Prusa Mini style to allocate as you need!!! Enjoy ! Print Settings Printer: Prusa MINI DIY Rafts: No Supports: Yes Resolution: 0.16 Infill: 25% Filament: SUNLU PETG Orange Category: 3D…
Case remix from https://www.thingiverse.com/thing:4094986 BigTreeTech logo from: https://www.thingiverse.com/thing:3827565 Zen3D shop
You can mount the Jinhyuk's TFT24 v1.1 Case on the right side of the printer Category: 3D Printer Parts
Remixed Birbou's TFT24 case to mount it on the 2020 extrusion upright. Also I'm changed the shape of the box, added the M3 heatsets holes and deleted the buzzer holes. I'm using it in my CoreXY build so I was needed this solution.
main body was by Zen3Dhu As banggood seems not to sell the correct cable for attaching the tft24 to the ender 3 via the e3 mini v1.3 mainboard in the original mode, until i have timew to create my own cable for it, i have kept the…
About An articulated mount for the Bigtreetech TFT24 screen that can mounted vertically or horizontally on the 2020 t-slot alu extrusion. I used the shortest arm and horizontal mount but you can take other details in the original…
