112 models
I lost the litte handle cover, so i made my own. Should also fit on the TM6.
Print approx. €0.24–€0.30 excl. taxPreliminary estimate for PETGSource material: PET
The turning tool is a small helper for the Thermomix (TM5) from the company Vorwerk for easier removal of dough. It was designed by McBohl . You can find his publication on thingiverse . With this one can easily turn the knife of the…
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for one variant
This is a tool that holds the TM6 knife in place for cleaning and drying.
Print approx. €3.47–€4.24 excl. taxPreliminary estimate for PETGSource material: PET
Mit diesem Aufsatz lässt sich das Messer einfach drehen und somit z.B. Teig rückstandsloser aus dem Mixtopf entfernen. Das auf den Fotos zu sehende Modell wurde mit dem Prusa MK4 aus PLA gedruckt. Slicer-Einstellungen: 0,2mm Quality,…
Print approx. €0.67–€0.81 excl. taxPreliminary estimate for one variant
This is a simple but effective splash guard for the Thermomix. printed with adaptive layer height for quicker and better results. it uses a modifier to remove the top and bottom layer and Gyroid infill at 20% to create a filter, releases…
Print approx. €0.84–€1.02 excl. taxPreliminary estimate for one variant
A toolholder for Thermomix accessories for the TM 5 but it should also work on the TM 6. Feel free to make a remix. If it does not fit on your printbed then split it into 2 parts with the step file and glue it afterwards together. On the…
Adjust the design for better bed adhesion Print instructions Category: Kitchen & Dining
This holder for spatulas belonging to TM6 and also TM5 will keep your kitchen clean. No more mess around with dripping and rolling spatulas. Printing Recommendations: 0.2 mm layer hight or less, no supports needed, 15 % infill, 2-3…
Made this for my wife, since the original tool from Vorwerk costs €14.- and this part is just a few cents. Since I printed it for her, she's using it almost every time when she uses her Thermomix. Printed in PETG (Prusament Anthracite)…
I changed the hole for the spade. Because at the TM6 it´s a bigger version. And I add a O-Ring 3,5x85mm that it fitts better. I had the problem that the holder has not held well with me at the Thermomix. Now it´s fitts perfect at my TM6.
Give me a Like 💗 Follow Me 😁🤗 40mm Bosch-Siemens = 5mm Hole 40mm Universal Slot Short = 5mm Slot 14mm Deep Universal Slot long = 5mm Slot 28mm Deep Features: The Vertical position is better to clean it. Very neat and organized. Compatible…
very useful to unload pastry of the mix-pot, simply attached to the blade and turn…. ----------------------------------------------------------------- sehr nützlich um Teig aus dem Mixtopf zu entnehmen, einfach unten auf den Antrieb…
Mit diesen Verkleinerer fliegt nichts mehr im Mixtopf herum und man erspart sich das runterschieben mittels Spachtel. UPDATE (11.11.23): Habe eine neue niedrigere Version hochgeladen, da bei der alten der Deckel nicht genau drauf passte.
Es un robot de cocina thermomix TM6 para los muñecos Pinypon. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: Yes Resolution: 200 Infill: 5% Filament: 3DFils PLA Blanco Notes: Soportes en árbol. En Cura:…
Update: I added two support arms for better stability. The arms in Version v11 are a little bit shorter. I split the design in two parts and made holes for M4x20 srews. Prints without any supports. Updated version also has some chamfers…
Printed with PETG but PLA should work aswell.
Spritzschutz für den Thermomix TM5 oder TM6. Kann als Alternative zum Garkörbchen verwendet werden. Sollte in einem hitzebeständigen / lebensmittelechten Material (z.B. PETG) gedruckt werden. Ich habe den Spritzschutz mit 80% Füllung…
This is a tool that holds the TM6/5/31 knive in place when it's in the dishwasher for cleaning.
Teigblume for easier dough removal on the Vorwerk Thermomix TM5. Not a original part from Vorwerk. For the Print i used the following settings: Filament: PLA, PETG Layerheight: 0.2mm Walls: 1.2mm Infill: 20%
The model prints without supports. I used TPU and printed it with a layer height of 0.2mm. I guess that bigger layer heights also shouldn't be a problem. Just make sure that the material you use withstands the temperatures inside the…
Version 2 now avalible! Updated version has some improvements: the handle hook has been replaced to make it easier to remove the basket from the Thermomix the wall thickness was changed from 2mm to 1mm to improve cooking a larger hole in…
Edit: Added a version without the extra screw and a lip to avoid rotation (experimental, not tested yet) This is the second version for the handle for the MONSIEUR CUISINE CONNECT (the copy of the Thermomix from Lidl) I printed it with…
My Thermomix "Teigretter" helps for easier dough removal on the Vorwerk Thermomix TM5/TM6. It is loosely based on the “Teigling” model made by DonBorste but completely drawn by myself - see…
Thermomix TM6 Holder - Remix - Original Creator: <Click> Cut in 2 Parts and now screwable with 2 M3x20mm Features: -No Supports needed -Stronger than the Original One because right Print Direction -2h Print on a Bambu Lab X1C instead of…
This is a miniature remix of the Thermomix model by Dr. Crimmiale to suit the "Elf on the shelf" motive, as this version fits perfectly into the Kallax model by Haui_93:…
Toddlermix - this is a perfect toy for a kid that would like to cook together with the parent in their favorite multicooker. Can be also a fun gift to a person who dreams of newest Thermomix :) It was a big effort to design this replica…
The part comes in contact with food, please use food-safe plastic.
Englisch An egg separator for the thermomix TM6 printed with supports in PETG Printing time with Bambulab X1C 1:42h Generic PETG settings Deutsch Ein Ei Trenner für den thermomix TM6 gedruckt mit Supports in PETG Druckzeit mit Bambulab…
Hier findet ihr einen Halter für das Messer des Thermomix TM5 und TM6 der Halter ist in PP gedruckt damit er haltbar ist in der Spülmaschine, ich verwende ihn nun selbst seit knapp einem Jahr und er funktioniert tadellos. Durch den…
Protective display cover for Thermomix/Bimby TM7
ho creato il deviatore in due parti per ridurre al minimo la necessità di supporti e per poter avere un ugello più lungo possibile per la mia stampante. Le due parti sono ad incastro, ma volendo si possono incollare tra loro (ovviamente…
Made this for my wife as she wanted something to put the lid aside during cooking, without making a mess on the kitchen counter. Will work with Thermomix TM7 lid. Added some silicone pads to the bottom so it won't slip around, those are…
A friend of mine asked me to print a Thermomix for his son. So I printed it
ASA is the best choice for a dishwasher
########################################################## V2 version released (07/2021): Improves grip and it's easier to print https://www.prusaprinters.org/prints/71097-monsieur-cuisine-connect-handle-v2-lidl-thermomix…
We always had to use the basket for splash protection. But for the dishes this was always a PITA. Therefore, I made this splash guard. Just a disk with some holes and grips for taking out. No big deal. Printed in ABS, we'll see how this…
If you don't like to clean your Thermomix basket, this tool is for you. Simple but very useful. Print with ABS or ASA without any support.
Thermomix TM7 Weighing Plate The weighing plate automatically aligns itself on the Thermomix. The centering ring prevents it from slipping on the device. Printed from matte black PLA with 15% Gyroid Infill Plate-Diameter 200 mm Thermomix…
2 objects to be printed here - a funnel and an egg splitter that both fit in the hole of the Thermomix cover. I designed them for the TM6 but the hole size is the same so they should also work for TM5. Use FOOD SAFE filament- PETG for…
I printed it with 20% Density and 3 Perimeters. I think 10% Density is also good. 06.07.2019: added this also for gluei
Handle to turn the blades easily items needed: 1x M3 bolt 1x m3 brass insert
Thermomix TM6 Teiglöser. For manually rotating the blade to get the last Dough out. The fit is intentionally a bit smaller. use a hairdryer to heat up the coupler and press it onto the “star” to make a good fit… I used 4 perimeters and…
Please print with atleast 80% infill and use proper M4 screws to mount the pieces into the wall or into a wall cupboard. I recommend PETG. M4 screws are used for every one of the three seperate parts.
Mit dieser Drehhilfe könnt ihr das Messer vom TM5/TM6 drehen um z.B. Teig leichter zu entfernen.
Clip on Lid Holder for Thermomix TM5/TM6. Holds the lid in such a position that residue drips back in the pot. Printing: PLA 0.25 Structural Profile with 100% Infill
Držák na stěrku Thermomix. Udělal jsem držák s odkapávací plochou u kterého je jedno, jak stěrku do stojanu umístíte.
Sehr nützlich um den Schmetterling aus dem Mixtopf zu entnehmen, einfach unten auf den Antrieb stecken und drehen. Der Schmetterling lässt sich so ganz einfach entfernen. Auch Teig lässt sich so gut vom Boden lösen. No Support: TM 5&6…
The Vorwerk Thermomix TM5 suffers from a terrible design flaw of its three weight sensors (=WS). These can shift or break out entirely from their internal mount causing the weight sensor(s) to malfunction (e.g. display remains at “Max” or…
Split version of this Thermomix tool holder made for easy printing. Fits any printer bed larger than 200X200 mm
My wife wants a splash guard for the Thermomix. So I design this model. The challenge was, to design it printable. So I made the handles as extra parts, which have to be inserted into the splash guard. It's designed with zero tolerance,…
This is a simple twister for the Thermomix TM31. It does not fit the TM5/6 due to a smaller inner diameter. Its tolerances should be suitable for most 3D printers.
i made a stand for wall mounted thermomix tool holder so you can place it on your counter without drilling anny holes in your wall
The mixing bowls of TM5, TM6 and TM7 are very similar, yet all share one common and really annoying problem… …as soon as you remove the cutting knife, the bowl will tilt, which is really annoying when you put the bowl in the sink for…
Der Messerdreher macht das Drehen der Messerschraube besonders einfach – perfekt zum Lösen von Teigen aus dem Mixtopf. Einfach den Twister von außen auf die Messerschraube setzen und drehen, bis der Teig herausfällt. ✔ Einfache Handhabung…
Draufpressen und fertig. Material muss Hitzebeständig sein.
This is a Adapter to use the Tupper Spiralizer with your Thermomix. Put it onto the knife of your Thermomix like the Butterfly insert and use it anti-clockwise. Otherwise the two printed parts get loose and the sharp side of the knife…
This is an easy to print version of the driveshaft from the Thermomix WunderJuicer, to replace it in case it broke. A M5x20 BHCS is used to attach the parts together. There is a modifyer body included to increase perimeters and infill for…
Vytvořil jsem jednoduchý odkládací stojan na stěrku Thermomix. Ty které jsem naěel tak neměl hladké misky. Pro to jsem udělal takovou, aby se dala vytisknout na boku av misce nebyly nerovnosti od vrstev. Držák se bude lépe čistit.
Thermomix Dough Tool - 1x for TM31 / 1x for TM5/TM6
As the Thermomix TM7 is an expensive product, I want to protect the display while using it, just like a smartphone display. Thus the bumper stays always on. For my final cover I used the Bumpmesh tool by @CNCKitchen…
Thermomix Zubehör Wandhalterung
Remix des Halters von Patrick82 damit es in unsere Bosch Spülmaschine mit 66mm Stababstand passt. Das originale Modell ist für 61mm ausgelegt. Außerdem wurde das Modell noch mit Fasen und Radien versehen. Die Original Version hatte ich in…
I have created this tool holder for this bowl holder, but can also be used alone. Hold the simmering basket, the spatula, the lid cap and a twister key for the blade (the butterfly whisk ca be stored in the basket). If you like my designs…
klička pro snadnější odstraňování těsta z hrnce
This is a sliding board for the Thermomix TM6. May work with the TM5 - I don't have one so couldn't verify. Requires a 300x300 bed! Print 1 board, 3 feet, 4 rollers and 2 connectors. PETG works for the board. PLA not recommended, may sag…
Supplier wouldn't fix our old thermomixer, so I modeled replacement part for the big piece made of black POM. Print it upside down (as it is oriented) with supports. I used PETG for flexibility and temperature resistance which will be of…
Als Ersatzteil, kleiner Deckel für den Thermomix TM31,
I designd a replacement Gear for a Thermomix
Gobelet Doseur Thermomix TM 31 troué pour éviter au fouet de sortir de son axe pendant qu'il tourne
Thermomix Key for easyer emtying dough from mixpot. Thermomix Schlüsse um Teig einfacher aus dem Mixtopf zu bekommen. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 25% Filament: PLA…
A spiralizer for your Thermomix TM5 and TM6. Designed for the blades of the MATIVI spiralizer: https://www.amazon.de/gp/product/B078XHNWBP/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1&tag=mobilemacs-21 Use only a small velocity (1-4)…
Mit dem Halter kann der Deckel des TM7 auf dem Topf sicher mit Abstand positioniert werden. Das Auslüften des Topfes ist damit gut gewährleistet. Ich habe mit dem Prusa Mini und Prusa-PETG-Filament gedruckt.
UPDATE 3.10.25 Did an update on the varoma incl. lid as well as the pot with it's lit. Lid fits now much better and handle are sideways as the original. ORIGINAL post 2.10.25 At the end is a YouTube short showing the features of this…
Placa Decorativa "Bismillah" - Estilo Geométrico Moderno Esta es una pieza decorativa diseñada para cualquier hogar, que combina la caligrafía árabe tradicional con un estilo contemporáneo. La placa incluye la frase "Bismillah" tanto en…
I don´t wanted to buy a broken Varoma Lid for our Thermomix, so i designed a new one. Since this comes in contact with boiling water, please use a good Polycarbonat.
Thermomix Keychain Filamentchange at: Layer 2 Layer 11 Layer 31 Layer 40 PLA 0.2 mm
I dont have the oppurtunity to put screws in my kitchen wall, so i remixed the original design to be able to glue it onto my wall. Category: Kitchen & Dining
A little helper to get the Dough out.
just closed the drilling holes because i dont want to drill in my Splashguard. Used Nano Sticking Tape to stick it to the Splashguard. Sticks like bomb.
Remix des Modells von Bunsenbrenner14 als zweiteilige Ausführung um den Druck zu vereinfachen und auf Stützmaterial verzichten zu können. Teile werden mittel Schwalbenschwanz Verbindung positioniert und verklebt. A remix of the model from…
This is a detailed 3D model of the Thermomix TM7, designed not only as a display piece but also as a creative top section for small cacti or other miniature plants. The model can be scaled easily to fit different printers or decorative…
Play Kitchen Machine Thermomix like
Remixed Toolholder for Thermomix TM6 - 2 Parts no Support better shape for whisk holes for zipties prevents falling tool holder
The original drive gear shaft coupler in this machine is brass, however I still managed to break it when mixing ice cream, so I created this replacement to use. This part slides over the drive shaft under the pot and engages the blade…
Spritzschutz für den Thermomix. Passt in den Verschluss zum Aufbewahren. Gedruckt in PCCF mit 0,15mm Balanced Profile. Um 90 Grad gedreht drucken damit mehr Stabilität gegeben ist.
Řemenice Thermomix, zesílené stěny. Pridal jsem tolerance otvoru. 10,1 a10,2.
Ich habe die Schlitze zum Aufstecken in die Geschirrspülmaschine gedreht.
Ohne Stützmaterial druckbar auf der Seite liegend. Der Griff passt auf den TM3300. Bitte eine etwas längere Schraube mit Unterlegscheibe verwenden. Ich habe mit PETG gedruckt. Die Dichtung ist fester als die alte wenn man TPE druckt. Aber…
A bookend with three slots for TM5 recipe chips. I added an angled version as well with slightly loser tolerances.
A tool that helps to release the engine clutch from the gear. / Ein Werkzeug welches beim lösen der Motor Kupplung vom Zahnrad hilft.
If you want to wash your Thermomix Motor with Alcohol. For repairing of course.
Das Model verkleinert das Topfvolumen. Beim Zerkleinern von kleinen Mengen wird das Gut nicht mehr im ganzen Topf verteilt. Ich habe das Model mit PETG ausgedruckt.
Das Model verkleinert das Topfvolumen. Beim Zerkleinern von kleinen Mengen wird das Gut nicht mehr im ganzen Topf verteilt. Ich habe das Model mit PETG ausgedruckt.
