43 models
You can use this card to quickly check the capacity of your tie down or D-ring anchors. Applied to 60 ksi steel only. Use the "Fit Red to determine a minimum capacity of 10 kips. (Math, 60 ksi steel, diameter is 0.461 inches, area of…
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for PETGSource material: PET
Tying the knot? I've made some heart-shaped knotted napkin rings to share with you! Available in three sizes are stylized napkin rings, textured like a rope and shaped like a heart! Approximate inner diameter measurements are as follows:…
This model is compatible with the lego system.
This model is compatible with the lego system.
10S4P (36V) 18650 Li-Ion battery pack for e-bike remixed with tiedown slots E-bike battery pack with case, and 18650 battery holder for 40 cells remixed with 3 slots for zip-ties or other tiedowns
The source marked this model as adult content.
I wanted a cleaner way to run a few cables along my small server rack and made this little part. You just put a velcro cable tie through the middle part to hold cables on. Zip ties would work too, but I don't really like zip ties for such…
This model is compatible with the lego system.
This model is compatible with the lego system.
Inspired by Märklin's 74636 bridge (I had a version of it for M-track as a kid), I wanted to see if I could develop a printable bowstring bridge that works for C-track. The Märklin original part is about $40 as of the time of model…
Remixed the cane cup from zumili's excellent Walking Stick Rollator Mount so that it only requires one piece be printed and only needs a long zip-tie to mount. May be useful if, like me, the correct sized metal pieces for his model are…
nice diorama women use it for various scenes like french revolution +++ Attention on the ropes in the back Have fun see the other npc in my account here HAVE FUN
Zip-tied bottle opener. Perfect on your bike or on any tubes you want ! Needs one magnet (size Ø10*3mm) to catch the cap. You can attach it on cylinder of diameter around 26-32mm. Setup magnet by pressing or hammering them into the part.…
Experience the raw emotion and artistic beauty of this stunning abstract sculpture that brings contemporary art directly to your 3D printer with this detailed STL model. This thought-provoking figurine captures the human form in a…
When moving the extruder motor to the x axis carriage there is a hole left where it was mounted. This provides a place to tie the hot end cables down and covers the holes. The cable is oriented vertically so it does not droop down and hit…
Celebrate a love that binds two souls together with "Tied by Love." This striking 3D printable sculpture features two elegant swans facing each other, their arched necks creating a perfect heart silhouette. The design is simple yet…
Larger pack, can be setup as 10S5P with two blanks, or 13S4P full
Should work with any decathlon light that has a clip, such as: LED Clip 900, LED 100, SL510, RL510, Elops, etc. Two models are attached, angled for the head tube or the seat post. Need two zip ties for each.
This is a tie down for the Gorilla Cart stake pockets. The slots are to accomodate 1" nylon straps. It is designed it to be used in association with my Gorilla Cart stake and utility hooks to transport items like surf boards and beach…
I liked the idea of a cleaner SD Card reader that goes under the Display but SmileyMan3D's holder system didn't work for some people (me included). Therefore, I designed an SD Card Holder that can be cleanly mounted via Zip-Ties. Zip Tie…
WIP-more Improvements to come decorative battery tiedown with area to put text or whatever in. Verified fitment on 8thgen Si and 9thgen Si this may fit other Kseries as well (unverified) Print Settings Printer Brand: Creality Printer:…
I use a 20m delta loop in my small urban back yard. It uses DX wire (a black PTFE insulated wire) to be discreet, and works okay. That said, I originally just put larkshead knots (aka “cow hitch”) in the corners, and tied those down…
Remix of Adam's latch ring with a larger hole to accept a rope for tying the hatch down when transporting bulky items.
I made a small table out of scrap plywood and a set of 28 Inch Hairpin Table Legs, (3 Steel Rods 1/2 Inch Pipe Diameter). The provided floor protectors kept falling off the bottom of the legs, so I designed my own. I also wanted to…
Prints without issue at 0.2mm layer heights without supports on Prusa MK4 with input shaping.
This is a single slot hook mounted tiedown point for Closetmaid ShelfTrack and Rubbermaid FastTrack vertical rails. It works by sliding the longer end up into the rail, pushing the part into the rail's outer face, and then pushing down…
There are 2 models, each with 6.5 mm holes, one with a 1 inch separation and another with a 1.5 inch separation and a bit more height to handle 2 cables and 3 cables respectively held down on a Losmandy Universal Dovetail Plate.
Do you find your wires for your ElectroBlok projects a bit of a mess? Are you trying to tidy up your generalized cables system? Fear no more! The PrintABlok tie down Bloks are here to help! With 10mm wide hook and loop straps, or normal…
I used these to anchor 1" velcro tape used to secure a LifePO4 battery in an Apache 3800 case used as a travel box for a Starlink Mini. They also were used in restricting movement of the battery. They were attached to the case interior…
I made this to adapt the traditional brass tail piece string mounting to allow Nylon Classical strings instead. Traditional Selmer Maccaferri Guitars use ball end strings. If you place 1 adapter on each vertical post its perfect for Nylon…
A simple tool to safely release the pressure in emptied Petainer containers before recycling. It seems that some people got seriousy hurt by puncturing these with a knife, which caused them to explode, so a friend came up with the idea…
Tried some other endstop mounts, but they were more complicated than I thought was necessary and tended to stick out too much. These are about as minimalist as you can get without just gluing the endstop directly to the rail bracket. Clip…
The HeroMe Gen 5 OEM Extruder adapter for stock Creality Ender 3/Pro's only accommodates the plastic stock extruder and the red aluminum extruder. They both have a triangular socket for the bowden tube coupler but the newest Creality…
Simple remix of the heavy duty tarp clip, in case you run out of nuts and bolts and have a bag of zip ties lying around. Has that little notch for the zip tie to sit in. Still can use nuts and bolts as the original.
Print two, and use the screw holes already present inside the vehicle to hold down the new battery. Move the control box to the side wall of the battery compartment with double-sided foam 3M tape. Battery used is the Mighty Max Battery…
this model is tied with the worlds smallest .stl: 84 bytes
This is a set of tiedowns for a Jonkers JS3 18 meter glider. The glider came with no provision for tying the wings down, which you need to do if you want to keep the glider assembled. This design provides a safe way to do that. My design…
A device to clip onto trunk (boot) latch to enable tying the boot down when carrying large items. Scale by up to 125% advised. Best in PETG Scad file added so you can adjust as you like.
I wanted a cleaner way to run a few cables along my small server rack and made this little part. You just put a velcro cable tie through the middle part to hold cables on. Zip ties would work too, but I don't really like zip ties for such…
Zip-tied bottle opener. Perfect on your bike or on any tubes you want ! Needs one magnet (size Ø10*3mm) to catch the cap. You can attach it on cylinder of diameter around 26-32mm. Setup magnet by pressing or hammering them into the part.…
TRESPASUERS WILL BE HOGG TIED AND TOLD THEY HAVE A PURTY MOUTH SIGN Category: Signs & Logos
Meet the unluckiest (or luckiest?) pig around! This hilarious Goofy Tied-Up Pig looks like it got caught causing trouble... and somehow still has a smile on its face. Packed with funny details and cartoon charm, this 3D printable figurine…
