Counting matching models…
This design is my attempt at creating the ultimate 3D Printable BOTW Master Sword. This Master Sword was meticulously designed in Fusion 360 so that all parts can be printed without support material, and the final piece can be assembled…
I'm excited to introduce you to the Flexetki . A fidget and skill toy that takes advantage of 3D printing and gives you a fully functional skill toy with no assembly or post processing . Just print, take it off the build plate and you're…
It's been exactly 5 months since I published my first 3D print design. Back in August, I uploaded my design for a fully 3D printed Master Sword from The Legend of Zelda: Breath of the Wild. I had been working on that design on and off for…
Vánoční vykrajovátka. Ještě jsem nevyzkoušel v praxi. Doufám že budou fungovat dobře. Edit: Už odzkoušeno, fungují dobře. 29.1.2022 Opravený sněhulák Děkuji za případný like. Thanks for any likes
I made a Remix of my Bokoblin BIG SIZE Chest. it has a lot of space !! look at my other Chest https://www.printables.com/de/model/402890-botw-bokoblin-chest-big-size-for-switch-games-and- - Infill 15% - Support yes
Příchytka na čalounění - dočasně trvalé řešení zlomené příchytky. Tisknuto z PET-G a drží (z PLA praskla). Temporary (forever) solution. I printed it from PET-G and works fine (or ABS/ASA should be OK, from PLA it cracks - too fragile…
I'm excited to introduce you to the Flexetki . A fidget and skill toy that takes advantage of 3D printing and gives you a fully functional skill toy with no assembly or post processing . Just print, take it off the build plate and you're…
Link, Purah, and two Zeldas. They’re definitely going to need supports, and I also recommend scaling them up nice and big before slicing, assuming you want the fine details. Have fun with these, and if you want to see more, give a like…
The collection includes: triceratops stegosaurs parasaurolophus brachiosaurs elasmosaurus ichthyosaurus iguanodon styracosaurus spinosaurus sauropod plesiosaurus parasaurolophus ornithomimus and others …
Cookie cutter for Christmas gingerbreads. Snowflake is raised by 4-5mm depending on your scaling to be “printed” on top of the glove. Update 11/12/2022 I uploaded another model with slightly increased height of the snowflake. Use…
Prologue: In the 10 or so months since I posted my Master Sword design, I've had countless requests for some sort of wall mount or display stand design. There's even been several designers that have published their own displays for the…
Náhrada za kovovou M-LOK matku (např. pro použití na airsoft replikách). Neobsahuje závit (šroub si ho vyřízne). Materiál: PLA/ASA Parametry tisku: Perimetry: 2 Výplň: 100% Výška vrstvy: 0.15mm ---- Replacement for the metal M-LOK nut…
The Legend of Zelda: Tears of the Kingdom MasterSword by xenonjibei on Thingiverse: https://www.thingiverse.com/thing:5988140 I prepared the blade in Bambu Studio for multicolour printing. I also split the blade in half and scaled…
Hey all! If you're here, you probably want a cool mounting solution for your JetKVM into a 1U rackmount form factor. You're in luck! Below I've outlined options for both fully 3D-printed solutions, as well as hybrid solutions utilizing…
(EN) Christmas cookie cutter. I recommend using it only once and then throwing it away. Due to bacteria settling between the layers. (CZ) Vykrajovátka na vánoční cukroví. Doporučuji použít pouze jednou a poté vyhodit. Kvůli bakteriím…
I couldn't find a good model of grinch cookie cutter, so I created my own. This is my first attempt of cookie cutter. Nemohl jsem nikde najít dobrý model vykrajovátka Grinche, tak jsem se pokusil vytvořit vlastní. Je to můj první pokus.
Vykrajovátkem nejdřív vytvoříte obrys a poté tvarovátkem vytlačíte požadovaný vzhled.
Good results without any support-structures. Print needs 25h with a Creality Ender 3 S1 Pro and 60mm speed (via Klipper). Because of the enormous number of edges, you should do some fine-tuning in optimizing the speed at corners and the…
This model is also editable on Tinkercad This model is only for the TKL keyboard (the one without a number pad), if you have one with the number pad, the circuit board will not fit into this box. !!! C plate must be printed with 0.1mm…
Update 12-06-2025: Added V2 of the controller holder. Removed tiny overhangs from the front pattern, that pushed through the bottom surface. Bottom surface should lay completely flat now! ---------- We bought our Nintendo Switch in the…
🇬🇧 – English – A collection of 34 Christmas cookie cutters. Small ones, usually between 3.5 - 5 centimeters big. Collection includes: angel bell candle candy church comet cookie cross fish glove hat heart house moon mug ornament pig…
This remix is a mashup of @Popandsicle's excellent BOTW Master Sword Hilt and @xenonjibei's TOTK Corrupted Blade! All credit for the designs goes to each of them. If you have already printed @Popandsicle's Master Sword then you should be…
Green Onion Mason Jar Station! tired of buying and buying? time to start growing instead! simply chop the bases off the onions and stick them inside a jar of water (with nutrients). they dont need much light and are very hardy. made for…
The goddess statue from Tears of the Kingdom. (From the Temple of Time.) Prints without supports. If you have any questions, complaints, thoughts or requests, let me know! If you need help with anything I’ll help you as well as I can.…
I wasn't really happy with the alternatives and wanted a mount that would blend in well with the antenna and the wall. My copy printed in Prusament PETG on a Mini with 0.6 nozzle, input shaper and 0.25 mm structural setting. I hope the…
The collection includes: egg rabbit bunny rainbow flower bee ladybug cross church sheep tulip oven glove chick carrot sun [in Czech] V kolekci je vykrajovátko s tématikou Velikonoce: vajíčko králík zajíc beruška kuřátko sluníčko tulipán…
🍫 A very simple but realistic model of a mini KitKat, you can print in any shade of brown for milk, white, or dark chocolate; or even pink for strawberry, marble for cookies & creme, or light green like this for matcha. Get creative and…
Rowan Atkinson, Mr. Bean Meme
EN - English A set of stamps designed for ceramic production. These stamps are created with an emphasis on easy of use and flexibility. A magnet is integrated behind the 0.2 mm layer of both parts of the stamps, allowing the printing part…
Náhrada za kovovou M-LOK matku (např. pro použití na airsoft replikách). Neobsahuje závit (šroub si ho vyřízne). Zmenšen vnitřní otvor z M4 → M3. Materiál: PLA/ASA Parametry tisku: Perimetry: 2 Výplň: 100% Výška vrstvy: 0.15mm ----…
🇹🇷 Türkiye'ye hoşgeldiniz! Welcome to Türkiye! In collaboration with Spanish architect @archetri.coo , we bring you one of the most important landmarks of Türkiye, the Anıtkabir. Anıtkabir (literally, "memorial tomb" ) is the mausoleum of…
Bohužel mi po vytištění úplně nesedly části obličeje do připravených otvorů. Po jejich naklepnutí do hlavy se objevily praskliny ve vrstvách okolo. Chce je to tedy buď zbrousit nebo ještě upravit v programu. Tištěno z Petg. Hlava tištěná…
A 10-inch rack mount for the JetKVM. I made this model in 3 variants. For 1, 2 or 3 JetKVMs. Each variant also has versions with keystone slots. A huge shout-out to JaredC01 for the original mount, which I used as a base for mine. His…
Deutsche Version der Gingerbread House Kit Card mit “Frohe Weihnachten” Lässt sich in 0,2mm PLA wunderbar drucken. Mit dem Prusa MK4 passen die Teile sehr gut ineinander und lassen sich auch ohne Zange leicht aus dem Rahmen lösen. Vor den…
I'm having a blast playing The Legend of Zelda: Tears of the Kingdom. I decided to make a Coaster taking inspirantion in the game art. Enjoy! If you have any questions or suggestions, hit me up in the comments. And if you wanna support…
Christmas Cookie Biscuit Gingerbread Cutter (approx 55 mm) You can change scale in the Fusion 360 File in Parameters Table, for make the cutters bigger (X and Y axis), without to increase the wall thickness. (See attached picture with…
This custom side panel for the Framework Desktop mini-PC can make it run 5-7dB(A) quieter combined with the custom fan duct. See this blog post for further info: https://noctua.at/en/how-to-make-the-framework-desktop-run-even-quieter
Klasická prusa matka s přidaným textem. Doufám, že vaše matka má taky smysl pro humor :D Na obrázku je vytištěná 150% velikost
I made a Remix of IXPatch Bokoblin Chest for my Switch Games or Blue-rays i added 2 options to print the Chest - 2 pieces bottom and top - 4 pieces 2 bottom parts and 2 top parts (cut in the middle) you also need 2x M6 x 60 screws and 2…
You can donate here: https://www.paypal.com/donate/?hosted_button_id=BTTC6BR69RRAL One version multicolor ( printed on Průša mini), one version embossed. Filament Prusament PLA mystic brown Update 1: Added forgoten chamfer on top Update…
It´s dice for a board games with 20 faces/numbers. Je hrací kostka pro stolní hry s 20 stěnami/čísly.
There’s two versions, one with a chain and one without. Pretty simple. Print it as is but with support on the build plate. You could use this file to make a keychain, earrings, a necklace, or whatever you want. If you make it, please post…
Christmas Cookie Biscuit Gingerbread Cutter (approx 85 mm) You can change scale in the Fusion 360 File in Parameters Table, for make the cutters bigger (X and Y axis), without to increase the wall thickness. (See attached picture with…
Kalibrační kostka pro zjištění nasobiče extruze (Flow) Teaching Tech 3D Printer Calibration (teachingtechyt.github.io)
Dvoudílný držák pro uchycení kuličkových řetízků horizontálních žaluzií. Vhodné pro řetízky s průměrem kuliček: 3,2 mm. Rozteč středů otvorů pro upevnění krytky na okenní rám: 25 mm. Print instructions English text bellow Držáček řetízku…
Yet Another Filament Clamp - keine fetzigen Namen, nur eine optimierte Filamentklemme! Schnell gedruckt und einfach angebracht. Kein Schnickschnack!
Stínítko kamery pro QiDi q1 PRO - odstínění svitu z osvětlení uvnitř komory. Vytištěno z PLA - zatím mi drží, ale rozumnější bude např ASA, nebo jiný teplotně odolnější materiál, neboť q1 PRO má vyhřívanou komoru, až na 60°C. Materiál -…
Filament need cca 7-30m. Use brim. Size width x lengt (mm) 42x141 (A,H), 70x164 (B,I), 60x197 (C,J), 100,x212 (D,K), 72X215 (E,L), 120X229 (F,M), 160x229 (G,N), 55X180 (O), 75X183 (P), 64X188 (Q), 98X189 (R), 90X223 (S), 128X221 (T),…
Improves filament guidance to the extruder while preventing filament contact with the Z-axis threaded rod. This is an accessory to the filament spool holder on the side of the printer: Ender 3 Filament Spool Holder Upgrade PREPARATION FOR…
Hier eine Aufbewahrungsbox für den Akkulötkolben von Parkside. Für den Deckel gibt es 2 Varianten, falls man die Klemmelemente aus z.B. weichem Material drucken möchte.
Vykrajovátko krtečka, co jsem vyráběl pro kamaráda. Vykrajovátko je zhotoveno ve smyslu - kontura Krtečka a otisk Krtečka do vykrojeného těsta. Těsto ideálně perníkové do cca 1,5 cm.
Я рад поделиться этим хобби с сообществом мастеров и, возможно, познакомить некоторых из вас с миром игрушек, развивающих навыки.
Vytvořil jsem kalibrační kostku o rozměrech 40x40x40mm všechny hrany kromě těch co leží na podložce mají zaoblené hrany
Jedná se o zjednodušenou napodobeninu spřáhla ROCO.
Pokusil jsem se vytisknout 3 různě silná trsátka s oboustranným gripem. Nejtenčí má pouze jednostranný grip. Print instructions Tištěno z PETG, teplota první vrstvy 260°C, teplota bedu 60°C. První vrstva 0,3mm, střed 0,15mm, poslední…
Zelda TOTK cover dock Nintendo Switch J'ai vue un fichier méga similaire sur Thingiverse mais le STL était très lourd j'ai donc tout refait. Voici mon fichier J'ai aussi mis le 3MF multi couleur pour bambulab Merci :)
I have since published a better Link model here. Introducing TOTK Link. Needs plenty of supports. I hope to see some makes, particularly if you paint it! I make lots of Zelda models, so if you like this, come check out the other stuff I…
CZ: Jednoduché sítko na 150mm hrdlo IBC nádrže. mřížka je 2x2mm a šíře rastru taktéž 2mm. Ano kruhové části by mohli být kulatější ale více než o tvar mi šlo o funkci filtrace vody z okapu do nádrže abych v nádrži neměl listí což by…
I modeled these in SideFx Houdini. The stones are based on the Secret Stones from the Legend of Zelda game Tears of the Kingdom. I sized up to 200%. I recommend Printing this at an angle with supports to get the best results.
I made 3d printable DTK Putnik silencer for airsoft ak family guns it has 24mm cw threads and there is also adapter for 24mm cw to 14mm ccw threads.
Hallo, Mit der Abdeckung soll die RTK Station vor Umwelteinflüssen wie starkem Regen und Hagel geschützt werden. Die Abdeckung hat 3 Haltezapfen und kann damit sauber fixiert werden Der Remix dieser Datei hat eine 5mm tiefer Überlappung…
RC TATRA 805 !! Zjistil jsem že zadní ramena nesedí a bohužel se špatně nahráli, pracuji na opravě chyby, také bohužel nemám čas na zpracování návodu tak přidám alespoň nějaké fotky ze stavby v případě nejasností mě neváhejte informovat.…
The Light Dragon from Tears of the Kingdom. It’s definitely going to need supports, and I also recommend scaling it up nice and big before slicing, assuming you want the fine details. Have fun with this, and if you want to see more, give…
Hi, print your two color dice without multi-material print and play board games as a life. Hoj, vytiskni si dvoubarevnou hrací kostku, bez toho aby jsi měl multi-materiálový tisk, a můžeš hrát deskovky jak o život. A když se ti kostka…
Nové, kulaté razítko NEW! : https://www.printables.com/model/1286346-samobarvici-razitko-selfinking-stamp Razítko je vytvořené z pěti snadno tisknutelných dílů s minimem podpěr (doporučené podpěry a orientace při tisku jsou vidět ve…
https://docs.centipede.fr/docs/make_rover/ * Module F9P DP0601 * Câble 6 pins fourni avec le F9P DP0601 * Module Bluetooth Hc-05 * rallonge 45° SMA * Batterie 2000 mAh * Module adafruit Power boost 1000c * interupteur * Adaptateur micro…
Custom wall mount for Mammotion Luba - this fits all their models (AWD 1000, AWD 3000 & AWD 5000). Greatly enhances the performance of the RTK antenna if you have buildings that are blocking the transmission of the signal.
Garden watering can sprinkler / Kropítko na zahradní konev
Every model is at least in 3 sizes - approx. 3.5 cm (1.7 inches), 5.5 cm (2.2 inches) and 7.5 cm (3 inches) Folder structure Animals Bear Fish - 3 versions Pig - 2 versions Reindeer Nature Comet - 2 versions Holly Moon - 2 versions…
Russian Flexetki Skill Toy and antistress Can print 100% size this 159mm ore change size
I've modified the original Mammotion Luba RTK Antenna Wall Mount to include a hole along the length of the stem, allowing the cable to exit downward. This update provides an alternative solution for cable management, especially if routing…
Piston imprint cutters. When you need use glue for hard plastic (UHU, Tamiya...).
[EN] Screw and nut (M14, M16) for testing purposes, can be used as a children toy. Dimensions: M14: 25 x 22 x 45 mm (length, width, height) M16: 28 x 24 x 45 mm (length, width, height) Material: PLA Layer height: 0.2 mm Infill: gyroid (15…
Made a visually attractive EDC knife holder for the collector. Uses a one standard 608 skateboard bearing (available for about $0.50 from Amazon). Model also includes 2 “foot” options. One that has a cavity where the print can be paused…
1x1 keycap for Logitech G915 TKL with Bitcoin logo. I used supports to the bed, using needle nose pliers made removing them simple. Careful not to grab the nibs. --- If you feel like tipping me, send a bitcoin lightning payment to…
The forest dweller‘s sword! Some parts need supports and some do not, use your sense. I haven’t printed this yet, if you have any issues PLEASE tell me and I will help you. However, I can’t fix everything so please make sure you will be…
Easter bunny cookie cutter size 7 cm Vykrajovátka na velikonoční zajíček velikost 7 cm
No special print settings or supports are required. Happy Halloween and bon appetite . 👻
This model features several weapons made for the Dummy 13 found in The Legend of Zelda: Tears of the Kingdom. The weapons are: The Gloom Club, The Master Sword, The Royal Claymore, The Knight's Broadsword, Biggoron's Sword, and The…
of course it's a yeti paw, bon appetit samozřejmě že to je stopa yettiho, dobrou chuť
Krmítko pro ptáky. Stačí komínem nasypat zrní. Zrní vypadává samo do kalíšku. Do oken je dobré nalepit průhledné plexy aby bylo vidět kolik zrní ještě zbývá.
Printed PETG, layer 0,2mm Gingerbread cookie cutter in the shape of a hen.
Klasická hrací kostka - tento konkrétní model využit na aktivitu pro Beeboty, proto výtisk zvětšen na 4 cm. Zkoušeno tisknout se 100% výplní (viz Gcode) i se 40% výplní - těžší kostka se lépe přetáčí.
Case for Ardusimple simpleRTK2B with lid. Dimensions 75 x 75 mm. 3D printable file case made for SKU AS-STARTKIT-BASIC-L1L2-NH-02. Construction features: - 3x metal thread ready (M3 screws) supports for motherboard raised fixing - micro…
Stackable Traffic Cone in Scale 1:16 for BRUDER Toys.
Functional and usable chest for Siku toy tractor front hitches or even back hitches when using my front to back adaptor! The chest is designed to be printed with a 0.4mm nozzle at 0.2mm layer height. I advise to print at 100% infill with…
Tray system for IKEA SAMLA boxes (5l or 11l) as nursery of seeds or cuttings / cloning for hydroponic propagation. The nursery makes already use of the final pots meant for example for the hydroponic tower. It holds up to 6 of the…
Ide o dekoráciu určenú na zdobenie. Je to niečo, čo si môže užiť každý! Je to veľmi jednoduché. Výška dekorácie je 19 cm šírka 22cm. Pred vytlačením, si pozrite pokyny pre tlač. Pokyny pre tlač Orientácia decoracie pri tlači by mala byť…
na běžnou objímku E27 osazen závěs, na něj tři vrstvy stínítek / three layers of lampshade are fitted on the holder, which is supported by E27 socket
Der Entkalker wird einfach auf den Wasserhahn gesteckt und danach mit Zitronensäure befüllt, anschließend lässt man das ganze ein paar Stunden einwirken und zieht danach den Entkalker wieder vom Wasserhahn ab und wenn die Einwirkzeit…
Bowling for kids:
Link’s Ultra Hand from The Legend of Zelda, Tears of the Kingdom. We were inspired by Link’s new ability to make a 3d printed prop that uses LED noodles. Guide: https://learn.adafruit.com/ultrahand LED Noodles…
An intimidating Ganondorf Bust from Tears of the Kingdom. If you print this, please post your make! And if you like this, please give it a like and follow me to see more. (Needs supports)
Easter egg cutters size 45 mm Vykrajovátka na velikonoční vajíčka velikost 45 mm
The source marked this model as adult content.
![34 Dinosaur cookie cutters / cutter [Dinosaurus vykrajovátka]](https://media.printables.com/media/prints/436994/images/5170817_35c08cb1-830d-46a6-a7bb-c976c65b530e_2f3baa8a-337e-4d63-994b-5dc2a96d2b4a/dino.jpg)
![34 Easter cookie cutters / cutter [Velikonoční vykrajovátka]](https://media.printables.com/media/prints/435476/images/5805640_44fba56e-4ed8-4c99-bc52-03e594d9d916_3a0c1e26-eaa0-48f4-803e-af550d92d5b4/vel2.jpg)
