Counting matching models…
Dieser Halter kann genutzt werden um den Deckel eine Thermo**x direkt an dem Gerät zu befestigen währen man ihn mit Zutaten füttert. You can fix the Lid of an Thermo**x direktly on the Maschine while you add some incredians. 2024-01-03…
I lost the litte handle cover, so i made my own. Should also fit on the TM6.
Made this for my wife, since the original tool from Vorwerk costs €14.- and this part is just a few cents. Since I printed it for her, she's using it almost every time when she uses her Thermomix. Printed in PETG (Prusament Anthracite)…
I changed the hole for the spade. Because at the TM6 it´s a bigger version. And I add a O-Ring 3,5x85mm that it fitts better. I had the problem that the holder has not held well with me at the Thermomix. Now it´s fitts perfect at my TM6.
Give me a Like 💗 Follow Me 😁🤗 40mm Bosch-Siemens = 5mm Hole 40mm Universal Slot Short = 5mm Slot 14mm Deep Universal Slot long = 5mm Slot 28mm Deep Features: The Vertical position is better to clean it. Very neat and organized. Compatible…
Thanks to DrMckay for the incredibly detailed model from Battlefront 2. I look forward to stripping it down into parts and printing it where time permits, Cheers Jace
very useful to unload pastry of the mix-pot, simply attached to the blade and turn…. ----------------------------------------------------------------- sehr nützlich um Teig aus dem Mixtopf zu entnehmen, einfach unten auf den Antrieb…
Mit diesen Verkleinerer fliegt nichts mehr im Mixtopf herum und man erspart sich das runterschieben mittels Spachtel. UPDATE (11.11.23): Habe eine neue niedrigere Version hochgeladen, da bei der alten der Deckel nicht genau drauf passte.
Spritzschutz für den Thermomix TM5 oder TM6. Kann als Alternative zum Garkörbchen verwendet werden. Sollte in einem hitzebeständigen / lebensmittelechten Material (z.B. PETG) gedruckt werden. Ich habe den Spritzschutz mit 80% Füllung…
Version 2 now avalible! Updated version has some improvements: the handle hook has been replaced to make it easier to remove the basket from the Thermomix the wall thickness was changed from 2mm to 1mm to improve cooking a larger hole in…
My Thermomix "Teigretter" helps for easier dough removal on the Vorwerk Thermomix TM5/TM6. It is loosely based on the “Teigling” model made by DonBorste but completely drawn by myself - see…
Thermomix TM6 Holder - Remix - Original Creator: <Click> Cut in 2 Parts and now screwable with 2 M3x20mm Features: -No Supports needed -Stronger than the Original One because right Print Direction -2h Print on a Bambu Lab X1C instead of…
Englisch An egg separator for the thermomix TM6 printed with supports in PETG Printing time with Bambulab X1C 1:42h Generic PETG settings Deutsch Ein Ei Trenner für den thermomix TM6 gedruckt mit Supports in PETG Druckzeit mit Bambulab…
The part comes in contact with food, please use food-safe plastic.
2 objects to be printed here - a funnel and an egg splitter that both fit in the hole of the Thermomix cover. I designed them for the TM6 but the hole size is the same so they should also work for TM5. Use FOOD SAFE filament- PETG for…
Thermomix TM6 Teiglöser. For manually rotating the blade to get the last Dough out. The fit is intentionally a bit smaller. use a hairdryer to heat up the coupler and press it onto the “star” to make a good fit… I used 4 perimeters and…
Mit dieser Drehhilfe könnt ihr das Messer vom TM5/TM6 drehen um z.B. Teig leichter zu entfernen.
Sehr nützlich um den Schmetterling aus dem Mixtopf zu entnehmen, einfach unten auf den Antrieb stecken und drehen. Der Schmetterling lässt sich so ganz einfach entfernen. Auch Teig lässt sich so gut vom Boden lösen. No Support: TM 5&6…
The mixing bowls of TM5, TM6 and TM7 are very similar, yet all share one common and really annoying problem… …as soon as you remove the cutting knife, the bowl will tilt, which is really annoying when you put the bowl in the sink for…
Der Messerdreher macht das Drehen der Messerschraube besonders einfach – perfekt zum Lösen von Teigen aus dem Mixtopf. Einfach den Twister von außen auf die Messerschraube setzen und drehen, bis der Teig herausfällt. ✔ Einfache Handhabung…
Thermomix Dough Tool - 1x for TM31 / 1x for TM5/TM6
Just in case it's not obvious enough: This is not an official product! Have you ever asked yourself why you're doing all this filthy manual work, even though you've spent a small fortune on a Thermomix®? No? Well I certainly have. Sure…
Mit diesem Aufsatz lässt sich das Messer einfach drehen und somit z.B. Teig rückstandsloser aus dem Mixtopf entfernen. Das auf den Fotos zu sehende Modell wurde mit dem Prusa MK4 aus PLA gedruckt. Slicer-Einstellungen: 0,2mm Quality,…
Uchwyt/maskownica dla programowalny wyłącznik czasowy 12V SINOTIMER TM618H XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Handle/mask wall mount for programmable timer 12V SINOTIMER TM618H - Jeżeli chciałbyś zapoznać się z tym co robię na…
This is a sliding board for the Thermomix TM6. May work with the TM5 - I don't have one so couldn't verify. Requires a 300x300 bed! Print 1 board, 3 feet, 4 rollers and 2 connectors. PETG works for the board. PLA not recommended, may sag…
This is a replacement rotary encoder knob for the TM680/TOM680 keyboard. There are three different versions: regular cylinder, filleted cylinder, and chamfered cylinder. The knob's outer diameter is approximately 19.5mm, and the stem…
UPDATE 3.10.25 Did an update on the varoma incl. lid as well as the pot with it's lit. Lid fits now much better and handle are sideways as the original. ORIGINAL post 2.10.25 At the end is a YouTube short showing the features of this…
just closed the drilling holes because i dont want to drill in my Splashguard. Used Nano Sticking Tape to stick it to the Splashguard. Sticks like bomb.
Remixed Toolholder for Thermomix TM6 - 2 Parts no Support better shape for whisk holes for zipties prevents falling tool holder
Use this to keep your Garmin Inreach snug as a bug in between your handlebar mounts. A purist might say that the orientation needs to be vertical for the satellite antenna but I like it this way as I can see it and it works just fine.…
Spritzschutz für den Thermomix. Passt in den Verschluss zum Aufbewahren. Gedruckt in PCCF mit 0,15mm Balanced Profile. Um 90 Grad gedreht drucken damit mehr Stabilität gegeben ist.
If you want to wash your Thermomix Motor with Alcohol. For repairing of course.
This is my machine torch mount for my Langmuir Crossfire Pro CNC plasma cutter, using the primeweld CUT60 with PTM-60 Machine Torch ( https://primeweld.com/products/cnc-ptm-ipt-plasma-cutter-torch-20-cable-euro-connection ) I printed out…
Spritzschutz für den Thermomix. Passt in den Verschluss zum Aufbewahren. Gedruckt in PCCF mit 0,15mm Balanced Profile. Um 90 Grad gedreht drucken damit mehr Stabilität gegeben ist.
