Counting matching models…
Money Tic Tac Toe This version of Tic Tac Toe, aims to introduce a more exciting component in the challenge of winning. It can be played with Tokens/coins of Dollar (black) and Euro (orange), created for this purpose. After the end of the…
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for PETGSource material: PET
I thought of creating of various sizes of toe spacer inserts for my Correct Toes spacers. I use them to help correct the natural shape of my foot due to wearing tight shoes growing up. They also help alleviate pain with Bunions and other…
I did a full suspension overhaul on my project car and needed to get the alignment somewhat close before driving it to the shop. Off the shelf options for toe angle plates cost upwards of $100, so I sketched up my own. Fairly large print,…
Fight over who gets to be the witch and who gets to be the fire! Print 5x fire and 5x witch. One board. We wanted to make a spooky halloween tic tac toe set to play in our free time. Utilize filament changes to make the fire features…
co-designed at participatory design sessions at SalvageGarden makerspace, the all too familiar Tic-Tac-Toe game was re-designed with caregivers and persons with upper limb differences low fine motor skills visual impairments This activity…
The Stack-N-Grow Planter is a smart and modular solution for growing plants that benefit from additional soil around their stems, such as tomatoes and other deep-rooting crops. Designed with a conical base pot and stackable extension…
Print Notes: You need to print 6 of the “Rota Piece,” 3 in one color, and 3 in another color. You need to print 1 “Octo Board” You need to print 1 “Octo Ring.” These pieces press fit into the board. They shouldn't take too much effort. If…
2 color Tic Tac Toe designed for LM Show Christmas Print Drive At Layer 2.20 make a color change swap to allow for a different color for game. 0.2 layer height, 4 top, bottom, walls with 15% infill Turn on Ironing all top surfaces No…
Full set: case — 1; bed (playing field) — 1; circles — 9; squares — 9. I didn't use glue because circles and squares fit tightly into each other. Printer brand: Flying Bear Printer: Ghost6 Rafts: No Supports: Doesn't matter. Resolution:…
Rose Sock Knitting Ruler Slide this ruler into your socks while knitting to get the perfect sized sock every time. Edit 2026-07-31: Added US Women's in addition to the existing EU sizes. Cleaned up the model files a bit. Edit 2026-08-17:…
Project Homepage: https://lerndinge.at/wp/logobox/ Deutsch: https://www.youtube.com/watch?v=a2xXxlJcjbU Deutsch: Die Logobox wurde für den Einsatz in der Primarstufe entwickelt. Angepasst an den kognitiven Entwicklungsstand sollen mit…
A portable version of the classic TicTacToe game with a satisfying snap due to the power of magnets. Ideal for when traveling with kids. Versions for use with 4x2 or 6x3 magnets Optional mount to place it on an angle on a desk. Optional…
Mistletoe that can be 3D printed and either be used as a decoration for Christmas presents or in a vase. Also possible to lasercut it with the DXF file. I prefer using wood filled PLA but any Filament works for this of course.
Playable TicTacToe Picture Frame. It used 5x3mm magnets with print in place. Printable without support. Frame: 18x magnets X and O: 18x magnets For best practice, use 2x nails. The different between the nails must be 110mm. I also added…
this is the halloween version of a model I will soon publish. Do not SCALE under 80% size* Print settings: 0.2 or finer layer* NO supports* I also used: brim 15% infill *print will not work without please leave a comment if you want a…
Juegos Apilables - Tres en Raya Mini Otro diseño de Tres en Raya… Todo un clásico. Esta vez embebido en un diseño de cajitas apilables modulares con cierre. Con un tamaño reducido de 105mm x 100mm x 32mm, es cómodo para poder jugar con el…
I always wonder why they make narrow shoes. Are there people who don't have big toes on their feet? I've bought a shoe-stretcher to widen space for the big toes, but it also has non-anatomic shape (the left and the right foot is the…
E N G L I S H This bracket is glued to the video projector. I use the thick Nano double-sided adhesive tape from the Action market. You can choose the position freely, but the remote control does not take up any space in the bag next to…
E N G L I S H The model is slightly smaller than the lens itself, so when printed with TPU it holds firmly onto the lens. My design does not need any support. D E U T S C H Das Modell ist etwas kleiner als die Linse selbst, so dass sie,…
Do you want to play Tic-Tac-Toe on your or your friend's hoodie? Now you can! It looks great in a hoodie or shoes ties. Recommended print settings: PLA, 0,20 mm layer height, 20 % infill, no supports.
Interesting articles about 3d printing: https://www.matterhackers.com/topic/how-to?aff=7676
I am continuing to try out different platform/flat mountain bike pedals that can accept toe clips (with or without modifications or adapters). The K-PEDC mountain/BMX pedals look like they might work out. Of course, they do need adapter…
Battle it out using either The Mandalorian or Grogu in this Star Wars version of the classic Tic Tac Toe game. Both .stl & .3mf files provided, so you can easily move objects to suit your printing requirements. Printing ideas: do filament…
Battle it out using either the Galactic Empire or the Rebel Alliance in this Star Wars version of the classic Tic Tac Toe game. Both .stl & .3mf files provided, so you can easily move objects to suit your printing requirements. Printing…
Battle it out using either Starfleet Command or the Klingon Defence Force in this Star Trek version of Tic Tac Toe. Note: I have provided an alternative lid option that uses the spelling “Defense” instead of “Defence”. Both .stl & .3mf…
Just like normal Tic Tac Toe but Stackable. No Support Needed. All three cones can be printed within each other as Print in Place with a slight brim for stability increase.
The rules are almost the same as in normal tic-tac-toe, except that you can cover the small ones with the large ones, which can make the game more exciting.
🐾 Tic-Tac-Toe Pet Edition – Cats vs Dogs 🐾 Enjoy this fun twist on the classic tic-tac-toe game! In Tic-Tac-Toe Pet Edition , cats and dogs face off in a battle of strategy and cuteness. The compact design with an integrated lid makes it…
Snap fit Ticktacktoe X and O pieces to play on your Qube 540 Case, it is also a cool design decoration at the side of the case.
Playable tic-tac-toe ornament with snowflake and snowball game pieces! 3D printable Christmas game. The peg system keeps pieces in place but not rigidly stuck while on the tree. Checkerboard inserts for use of multiple colors. Files In…
Requires Gule For the text Files tictactoe_ox_x1.3mf or tictactoe_ox_x9.stl tictactoe_base_text_x1.stl or tictactoe_base_no_text_x1.stl tic.stl, tac.stl, toe.stl(optional) Supports not added
To be honest, you can do whatever YOU want to do, like scale it up, I don't really care.
To play you place down the x and the os over the board and you throw an x or an o in the rings the closer it is the more spaces you move it goes up by one every time. it dosen't matter if you get an x or an o you just place it who ever…
Tic Tac Toe board game (Valentines Day edition). Tic Tac Toe a fun game to play with anyone.
Valentine's Tic-Tac-Toe game that uses magnets and spinners for a fun and unique game! UPDATE April 1, 2026: Modified the Blank, Heart, and Cupid Tiles for better retention - moved the 4 retention bumps slightly to make them click in…
Valentine's day remix of the on the go tic-tac-toe by El Macho. The o's are replaced with hearts and the x's are replaced with crisscrossed roses. The heads of the roses are 0.6mm taller than the stems so you can have 3 layers of red on…
It's not just boring tic-tac-toe, it's skiball tic-tac-toe. (kind of) roll in to playing tic-tac-toe with this.
I had to move my carpet and had to create a new throwing line. This is the result. material : PETG infill: 15% support: yes
I have smaller feet than is already covered by Mr. Cookie's set, so I quickly whipped up a toe tip that is a few centimeters shorter for EU 35-36 sizes.
This is a cool tic-tac-toe game. It is bigger than my last one, (check out my profile for that one) and is soo much funner than the last one. I used 5% infill and no supports or ironing and lighting infill pattern. I hope you like this…
Punta de flecha de muérdago -Atreus Mistletoe Arrow pendant. Un solo archivo.
ENG: A perfect board game for all ages, Tic Tac Toe offers a fun and fast-paced gaming experience. ITA: Un gioco da tavolo perfetto per tutte le età, Tic Tac Toe offre un'esperienza di gioco divertente e veloce.
I wanted bindings with the newer model toe strap that goes over the toe cap instead of the old-school over the foot type. Have been using these for two winters now, haven't failed me yet! Printed in A95 shore TPU.
This is a compact, pocket-size Tic-Tac-Toe board designed with a custom printed hinge made for 1.75 mm filament. The board folds closed for easy storage and portability. This version uses an oval-shaped hinge slot that allows the board to…
Releasing this master assembly of OTTOeject MK1 under OCL License. Please take note of the Open Community License and it's attributes. This is a plate changing system and simple automation solution that allows you to automate desktop 3D…
its a 3D TIC-TAC-TOE which can be printed easily. its a popular fun game played all around the world
Tris (Tic-tac-toe) with rotating tiles. I've attached a file with tests to check the tolerance. AMS required
an easter themed board game tic tac toe. all default settings will work great but for finer details I recommend using the lowest layer Hight your comfortable using. no support needed. print in all one color or mix and match. be sure to…
Who can help me? I have a print model in Meshmixer, but it’s too big to print in one go. I do see in my programs that you can cut it, but it’s not very easy. I would like to cut it in such a way that you can slide the parts together after…
Here is a fun 4x4x4 tic tac toe game, but it incorporates the game on new levels. Items to print (1) base for playing piece storage (1) base cover for playing piece storage (4) tic tac toe levels (16) layer connecting rods (32) playing…
Voici des toe block de remplacement pour les Sakura d5 /mr d'origine les block on 45mm entre les tables en comparant avec les autres modèles de véhicule j'ai vu que c'etais beaucoup trop et le kit que sakura vend revient a plus de 100$…
Tic-Tac-Toe Game Board A simple, no-fuss Tic-Tac-Toe set. The board includes slight grooves to define the squares. You can use your preferred slicer to change the color of the grooves for better visibility. Supports: Not needed
Versión grande del juego para facilitar la manipulación. La medida del tablero es de 200x200mm. Las cuadriculas están separadas por paredes de 4mm de altura. Las fichas miden 50x50mm y 20mm de altura. Todos los cantos de las fichas han…
Una reinterpretación moderna del clásico Tic Tac Toe, diseñada como un juego portátil completamente imprimible en 3D . Este modelo fue diseñado en Solid Edge por Goaltech , integrando buenas prácticas de modelado y preparación para…
Description A fully 3D-printed Tic-Tac-Toe (Morpion) game with its own screw-lid travel case. The lid screws onto the base and securely holds all the X and O pieces inside during transport. The lower section of the case features a hidden…
This tiny version of Tic-Tac-Toe has a size of 5,2cm x 5,2cm x 1,1cm and can be printed in a single piece (print in place). It is printable with multicolor (AMS/MMU) and without multicolor. The background-immage of the model is generated…
Portable version for traveling: 3D printed game set takes the timeless tic-tac-toe and supercharges it with an array of exciting features. The game board boasts a stunning, intricate design, while the X and O pieces are transformed into…
This is a version of the well known “TicTacToe” game. This game is easily transportable and can be played in a car, train or plane while traveling. The lid has been designed in such way that it is easily taken off to use as a tray to hold…
English (This translation is computer generated): Game for 2 players. Board game composed of nine boards arranged in a 3x3 grid. Players take turns playing on the smaller Tic Tac Toe boards until one of them wins on the larger board.…
Tic Tac Toe Jump is an exciting tabletop game where the objective is to be the first to complete a row of three balls of your color by launching them with your catapult, positioned on your side of the board. The catapult is designed to be…
To straighten an ingrown toenail. 1. Let your nail grow so that it protrudes 3 mm. 2. (optional) if the plastic part slides forward, put a double-sided tape on your nail first 3. Insert the nail by its flattest part first. 4. cut the…
A small Tic-Tact-Toe game 10cm squared size, you can take it everywhere in your back or your pocket and challenge your f
This compact and portable tic-tac-toe game is perfect for quick fun on the go! Just 50mm by 50mm, it’s easy to carry, making it ideal for travel, school, or small spaces. Print the board and pieces in any color combination you like to add…
a tristega (ultimate ultimate) tictactoe board in four pieces. to connect, glue all four pieces to cardboard or fabric
Elegant Tic Tac Toe combines elegance and functionality with an innovative design: the pieces are reversible, and you just need to choose which side to play in each game. The board measures 158 x 158 mm with a height of 15 mm, and…
This is a Mini Tic Tac Toe Game. Print 6 Crosses and 6 Circles. Have Fun with the Model!!!
I present a model of the popular game of tic-tac-toe. The game is a travel version - magnets are used to avoid losing or mixing up the pieces on the board. To create a full game set you need: -1x plate -1x cover -5x circle -4x cross -26…
Christmas card with small gift - mistletoe (single extruder print) Mistletoe and card are multicolor by lines - switch of two colors in single extruder.
Piškvorky jsou strategická desková hra pro dva hráče. Hráči se střídají v umisťování svých symbolů (obvykle „X“ a „O“) na čtvercovou mřížku. Cílem hry je jako první vytvořit řadu tří svých symbolů buď vodorovně, svisle, nebo diagonálně.…
I wanted some winter-themed studs for @MagnumDanger's giant LEGO holiday wreath, so here's a sprig of mistletoe! Printed this with supports and used a bit of white acrylic paint on the berries. Thank you @DianaSinkova_2052459 for the…
Ik heb deze print ontwikkeld om mijn tomaten planten aan een stok te geleiden. Ik heb verschillende filamenten geprobeerd, maar voor mij is abs het beste. Ik print ze af op 0.3 draft. I developed this print to guide my tomato plants on a…
Hi this is a fun and a classic game if you do not know how to play the rules are simply. You are either X or O. Whichever one you are you have that shape as you pieces to place. The Person who has ‘’O'' goes first. They place it down in 1…
With great respect to Thomas and his work done. Supplemented the chips with a marking on top. This can now be printed in one color. It will also allow people with visual impairment to play. I changed the case because I couldn't tighten…
This is an easy print with a simple filament swap you can do on the lid topper in order to get a good contrast between the box and the marks. No supports required but you will need to glue/Gloop the topper onto the lid. Have fun! Filament…
Ready to level up your Tic-Tac-Toe game? This 3D-printed version takes inspiration from iconic video game symbols and brings a whole new dimension to the classic game. Say goodbye to scribbling on scraps of paper—this set will have you…
