115 models
This is a non destructive way of fitting a HDMI output to the Amiga 500. Adding the RGBtoHDMI adapter to the original Amiga 500, gives it the ability to deliver a perfect digital HDMI output. When the small board is fitted inside the…
Print approx. €1.32–€1.61 excl. taxPreliminary estimate for one variant
The files are made for a MMU3 (here with MK4) Whereas the Chars (I|O, + and -) are changeable Also the used Extruder, here Main (Display 1) = 3, I|O, + and - = 1 Bracket X for place for two additional mosfet (fan and Led strip) There is…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for PETGSource material: PET
Czech flag molle patch for your back pack. Česká vlajka na batoh. před tiskem zkontroluj jestli máš správný model (bílá nahoru). czech_flag_molle-neg-otoceno.stl czech_flag_molle-otoceno.stl
Print approx. €0.28–€0.35 excl. taxPreliminary estimate for one variant
This rotational hook aims to bring new functionality to otherwise often unused parts of our homes and workshops. As stairs typically have vertical posts and are often located near an entrance, I see an opportunity to improve the…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
Almost out of filament? Print these with the last few fractions of a meter, and in a just a few minutes you can sing the blues. You can also load up a new spool set up a new print, and Rock ON while the new prints proceed! These couple of…
Printed from PET-G with 3perimeters and 40% gyroid fill works fine. The “outside” part contains integrated support (blue part in model image). Remove the support when printed. Check how the part (especially bridge at 10.7 mm layer) is…
Stackable material storage box / Stohovatelný - úložný box na materiál
This case is designed for the RGBtoHDMI project and is compatible with all versions of the 3-Bit, 6-Bit and 12-Bit versions. UPDATE : 22 July ‘22 - Improved snap fit and made the text deeper so it’s clearer to read.…
This model is compatible with the lego system.
For soldering instruction check out: https://www.printables.com/model/269757-stream-deck-marco-keyboard Make a test print of the base to ensure that your pro micro fit is snug. I did not have a need to glue mine. AutoHotKey Script Read…
This model is compatible with the lego system.
This model is compatible with the lego system.
See our other models Concept & Inspiration The Geometric Rhombus Earrings draw inspiration from the sleek, multifacets of cut diamonds and modern geometry. Their form echoes the sophisticated elegance and structural ingenuity found in…
Spare parts for Autohelm (now Raymarine) AH800, AH1000, AH2000, ST1000, ST2000 tiller pilots. One version of the end plate is constructed without provisions for an o-ring. Original is with o-ring. Groove depth is chosen a bit shallower to…
Edit: 1/15/2024 Highly recommend the EMG T set that the YOYOMAKER remix was built around, including the modified control cavity piece. This is IMHO one of the best T kits around and it's a drop in replacement for the Bexgears pickups.…
These are the models for my Autohotkey Streamdeck with Unified Communicator Keycaps. It houses a raspberry pi pico, RGB Leds and 4 Cherry MX switches. See https://buildcomics.com/3d-printing/a-microsoft-teams-adventure/ for the…
As a side-note: Be careful if you are working with roasted maple! While tightening the screws my headstock cracked. Nothing that wasn't fixable with glue and a jig, but still a word of caution. My designs are released under a public…
This is the Amiga 600 version of my RGBtoHDMI adapter Amiga 500 Version. For assembly instruction look at the Amiga 500 version. https://www.printables.com/model/63688-rgbtohdmi-adapter-housing-for-amiga-500
See our other models Concept & Inspiration The Eve Earrings are a striking synthesis of geometric artistry and profound symbolism. Taking cues from the multifaceted allure of cut diamonds and the creative spirit of modern geometry, these…
She's a snake shifter! Her name is Stringbean, and she's PERFECT! This is my first time sculpting and printing something. The character is String bean from The Owl House. She is articulated. Modeled using blender, printed on Ender 3 v2…
Pokud stahujete prosím o like. Děkuji CZ: Toto jsou stohovatelné šuplíky - původně navržené pod polici, v rozích je místo na 3mm závitovou tyč pro zvýšení nostnosti a jako spojovací prvek pokud by jste je chtěli skládat na sebe - z tohoto…
This is a case designed for c0pperdragon's RGBtoHDMI Mono & LumaCode. It holds both the RGBtoHDMI board and Raspberry Pi Zero. This is a remix of djos_1475's design. https://www.printables.com/model/92380-rgbtohdmi-case . The main change…
The Raymarine Autohelm 3000 is an automatic steering unit for sailboats that is no longer for sale. The drive unit is sandwiched between an engagement lever and this washer in the clevis mounted to the hull or binnacle (circled in Fig 16…
V3-Update Brought the guide rails,external clips, flashlight cutout and camera bump cutout in line with injection molding model as well. Readjusted the camer bump to fit the changes. V2-Update Button cutouts were readjusted in line with…
jsou to ruce bez batohu a bez detailu z poppy playtime
MANETA PILOTO MK1 Drive Unit RAYMARINE Autohelm 4000 / ST4000 REAJUSTADA MEDIDA DEL AGUJERO. SI QUEDA UN POCO GRANDE PONER UN POCO DE PEGAMENTO DENSO PARA RELLENAR EL HUECO, NO INSTANTÁNEO, EN EL AGUJERO. LUEGO PONER UN PAPEL ANTES DE…
A case for an RGBToHDMI with the optional TTL Buffer Board and DB9 TTL video input. Designed for resin printing but FDM may be possible. You will need: A Pi Zero An RGBToHDMI…
This is part of a series of simple platonic solids. This is the 1-skeleton of the octohedron, rounded on the inside and flat on the outside. Added .scad file. This also allows users to put text on the faces. Print Settings Printer:…
Printed this for my autohelm 3000 autopilot. I have the lever trimmed to fit my installation. The cog on the eccentric is just a bit bigger than module 1.25, so i used module 1.375. You can edit the cogsize in the assembly, I use it as a…
This is a hook for hanging tomato plants. Simply fix the cord through one of the holes and tie a knot (for me it was enough to just tie a knot that grabs on to the v-slot) and wrap the cord using the v-slots. The last wind goes up and…
(The uploaded model doesn't have the letters wrote, I uploaded the 3mf files to add customization). In Bujinkan we can use different shapes of a tactital knife. This model has been copied from the original Fox Specwog Warrior Combat Black…
Extinct eomysticetate from New Zealand.
This case allows you to protect your RGBtoHDMI while still accessing the buttons on the board. I often found my RGBtoHDMI board sitting on a bunch of junk on my desk and I didn't want to short something. Just remove the legs from your…
little mctoran with tahus mask (glue requierd)
Tisknout lze tryskou 0,4, 0,6 i 0,8 Použitý materiál tisku PETG Výška vrstvy 0,4 Typ stěny - Arachne
External dimensions of the box: 99x90x47mm. There are two versions of the container to choose from. Added a print profile with supports and another without supports. Slicer warns about printing problems. I don't have the MK3S+ printer at…
Hexa Tomatohook is a 3D printable tomato hook designed to support and stabilize tomato plants in a greenhouse. It consists of a series of hexagonal modules that are joined together to create a hook shape, and features interchangeable…
This stand ist for instax mini, polaroids and photos. You can also combine images with this stand.
A pin of Flapjack from the the Disney show "The Owl House" with insert magnets to hang on any magnetic serfuce. A .f3d file (fusion 360 file) is included to change the magnet size with the use paramenters. I used 3 3*6 magnets but you can…
This is a fully customizable truncated cuboctohedral frame [it is archimedian when frame_thickness=frame_width/[(sqrt(2)/2+2] with holes/supports in OpenSCAD. You can: 1)Adjust the outer dimension of the frame 2)Adjust the thickness of…
Yamaha, Honda, Tohatsu Kill Switch lanyard
Náhrada za poškozený klip hrudního popruhu pro krosnu. Přerušení tisku pro navléknutí původního popruhu bez nutnosti šití.
I remember folding several dozen of these creations as a kid to hang on the Christmas tree, heck that thing was covered in the decoration my sister and I made for it. And now I've spent far longer making a model of it and then playing…
Stackable box with adjustable size and design. NEW: Box cover model added. Some basic possibilities of design modifications: 2 models included - with and without cutout on shorter side NEW: 1 model of box cover added - you can apply the…
Print settings: 3 Perimeters 15% infill. It should be 100mm on each axis.
This model represents a Hexagonal Trapezohedron that I made in FreeCAD . Print Settings I Used (BambuLab P1P): • Nozzle: 0.4 mm • Layer Height: 0.16mm • Infill: 10%, Gyroid • Supports: None If you have any questions or run into issues,…
Tisk bez podpory, já osobně tisknu tryskou 0,6 vrstvu 0,3. Je to rozumná doba tisku. Tisk na prusa mini velikost 84 procent.
Původní model je velmi precizně udělaný. Ale přidal jsem další pružný element.
Extender with sleeve that fits the outboard throttle handle and a grip. Between these, an aluminum tube of 25 mm.
jen se musí zachovat minimální tloušťka prkna 2,4 cm, prkno má pero,drážku tisknuto na ležato - PETG, PLA
Getränkebecherhalter für die E-Zigarette
Dobrý den, Vítejte na mém profilu, plném modelů a miniatur :-) Jsem výrobcem modelů a tiskárnou Ainon3Dprint Mám držák na jakoukoliv PET lahev na váš batoh, opasek, nebo i na karabinu. Je dobré, pokud chcete mít obě ruce volné a nemusíte…
A picture frame in heart shape. You can insert a photo in the size of 70x80mm and click it together. You maybe have to put a drop of clue in the corners. Have fun and make a gift to your loved ones.
Stohovatelná krabička na šrouby, hřebíky, vruty, matice, apod. Vytvořil jsem z důvodu vytvoření pořádku v dílně ;)
TAPA SIMPLE AUTOHELM 30 Bidata COVER MEDIDAS INTERIORES: 120mm x 89mm x 23mm TU LOGO INDEPENDIENTE LO PEGAS DESPUÉS SINGLE COVER AUTOHELM 30 Bidata INTERIOR MEASUREMENTS: 120mm x 89mm x 23mm YOU PASTE YOUR INDEPENDENT LOGO AFTER Print…
My family recently came into possession of an original autoharp with several broken pieces. One of the chord bar guides had been damaged. Most folks will want to instead get a 15-chord conversion set instead. But if you just want the…
Pracka na batoh, aktovku, ruksaky. Šírka pásu je 25 mm. Jednoduchá úprava dlžky pásov a zaistenie proti posuvu.
Košík je vytištěn z PETG, tryska 0,6, vrstva 0,24, výplň 15% Gyroid (model 06). Možnost vytisknout i tryskou 0,2, vrstva 0,20, výplň 15% Gyroid (model 04)
A joke knight chess piece.
Nové plechovky jsou už dole zúžené, aby šly stohovat na sebe, staré ale mají stejný průměr a po sobě kloužou. Tak jsem si vymyslel takovouhle blbost a supr. :-) EN: Aid/ring for stacking paint cans
Černá přezka na fotce je originál, oranžová je kopie. Pokud se vám model líbí, budu rád za váš like. If you like the model, I would be happy for your like.
Jedná se o zpevňující stohovatelné nožky na rámy pro sušení bylinek a jiných věcí. Rám je z koupených latěk z baumartu k nim jsem sponovačkou přisponkoval stavební perlinku a do rohů přišrouboval vytištěné rohy . Příjemné sušení.
pokud nechcete tisknout s podporami dopuručuji šuplíky potopit o jeden milimetr
Plat můžete dát na sebe kolik chcete... Základní plato se skládá ze dovou částí zastunutých do sebe. Print instructions nejlépe z PET
PLASTOVÁ STOHOVATELNÁ KRABIČKA 185 x 145 x 55 po vytištění stačí odlomit podpěry na rozích a je hotovo ..
This is a reduced size version of the single HDMI port housing. Button removed and resized to fit an Amazon HDMI port. The HDMI Port is held in place with a combination of double sided tape (recommend Gorilla high strength mounting tape)…
I printed the model on an X1C with a Smooth plate using ABS, at 100% scaling and 0.08mm High Quality mode. The frame was printed on its back. I used tree supports (slim mode) with a 5 mm outer brim for the camera bump.
A wall-mounted octopus hook designed to hold cables, keys, accessories, and small everyday items. The tentacles can also be reshaped after printing using a hair dryer for custom poses and functionality.
Insert na karty o rozměru max 60x85mm. Idealní k deskovým, nebo kartením hrám kde je potřeba vytvořit více balíčků karet. Snadný tisk bez nutnosti podpěr.
Designed the bracket supports for the 2022 Ford F350 Super Duty Truck. This enables you to mount the included bracket behind the grill avoiding the hard angles. works with included hardware bolts for bracket (Once printed pre-thread the…
Krabička na herní komponenty ve dvou velikostech (větší - 100% / menší 75%). Krabičky lze stohovat do sebe a lépe tak přepravovat. PODPĚRY: NE -- Game token bowl in two sizes (larger - 100% / smaller - 75%). Bowls are stackable for easier…
organizer pro můj provizorní regál na cívky, stohovatelný, stačí přišroubovat každej třetí / čtvrtý a drží parádně. Tištěno z pla, pro domácí použití dostatečné
Both pieces can be printed standing without supports. If printed without supports, drill holes to round. Mount cover with small screws or pins.
Oba díly se spojují v sliceru před tiskem – výsledkem je jeden barevný model bez nutnosti lepení.
Držák batohu pod stůl s možností montáže na zeď
Průměr očka / hole diameter: 13mm Šířka zobáčku / slit width: 5mm Šířka věšáku / rack witdh: 60mm Opěry netřeba. / No supports needed.
Box pro motohodiny s objímkou pro upevnění na řídítka / trubkový rám ( pr. 25,7 ). Objímka má v sobě drážku pro stahovací pásku . Box má vnitřní rozměry 74 x 48 x 20
Water intake grate Tohatsu/Mercury M/Mfs 4-30hp 369-60206-0. I made this for a friend, copying the original part. Maybe someone will find it useful.
i borrowed the idea from an instructables. https://www.instructables.com/id/Buckminster-Fuller-Mashup-Lasercut-and-3D-Printed-/?utm_source=newsletter&utm_medium=email included is the hinge and a triangle. you will need to make 9 triangles…
Het zijn 2 smalle fotosteuntjes met gleuf voor 2 glasplaatjes met foto. breedte gleuf is 7mm Fotohouder smal = 20mm breed - 52mm diep en gleuf 7mm. Fotohouder breed = 60mm breed - 52mm diep en gleuf 7mm
**** Update: I created a version for 2 pin Fender / LTD locking tuner style *** Created this model because I am planning to sell some of my tuners that I swapped out. I wanted to create a better way for shipping tuning pegs safely in the…
This is a model of my own making to satisfy a need for cheaper than I could buy it from the company that makes the official item. This is to fit on a minione photohood (goes with their centrifuge and other items) so that a phone can rest…
Držák je upraven pro podélnou trubku, pokud vám úhel nevyhovuje, stačí ho ve sliceru odříznout a připojit originální držák v požadovaném úhlu(ve sliceru či lepidlem). Kryty jsou dva, jeden se zajišťuje pomocí výstupků, druhý má bočnice…
These parts protect the oil-covered shaft from dust in the state of "Calibration-AutoHome" function of Prusa. *There is no LCD panel. Each part requires glue for assembly. All of these parts can be assembled into a single unit and placed…
Many of the peg cranks for changing strings will not fit the gotoh mini pegs, this adapter slips into the crank side and fits snugly over the pegs. If you want a looser fit, sanding the inside will work. Scaling doesn't work well because…
Nejde o ten konkrétní model, ale spíš o cestu, která k němu vede a o ukázku síly parametrického modelování pomocí AI. Návodné video: Přiložený kód umí nastavit parametry krabičky (délka, šířka, výška), počet vnitřních dělení (od 1 do 5,…
This is basically just a blanking plate to fill in the gap around a Gotoh style 9v battery box (I think mine was a BB-02), when used to replace the standard battery box in a Sterling by Musicman SB14 bass. Note - there is some routing…
Easy way to store your rotohandles on your bench.
A simple box holder for this kind of box, it can also contain other thingd !!! Locked with dot big thread or similar locker. Enjoy !
Cover for Rails of Autohome Columbus Rooftent (best in TPU)
See our other models Concept & Inspiration The Geometric Rhombus Earrings draw inspiration from the sleek, multifacets of cut diamonds and modern geometry. Their form echoes the sophisticated elegance and structural ingenuity found in…
See our other models Concept & Inspiration The Eve Earrings are a striking synthesis of geometric artistry and profound symbolism. Taking cues from the multifaceted allure of cut diamonds and the creative spirit of modern geometry, these…
jsou to ruce bez batohu a bez detailu z poppy playtime
This stand ist for instax mini, polaroids and photos. You can also combine images with this stand.
