Counting matching models…
Tollerance tester: Inner Outer Height Bottom layer Top layer ... ALL dimensions are 10mm !!!
Print approx. €1.04–€1.27 excl. taxPreliminary estimate for one variant
Thx @ @neyth_makes_106416 Du hast mich inspiriert diesen Playstation 5 Konsole seitlicher Controller Halter etwas umzugestalten You inspired me to redesign this Playstation 5 console side controller holder a bit
I created this for my Playstation 2 controllers. It is completely printable without supports and in one piece. And keeps the cables nice and tidy behind the controller itself. I believe the original playstation Duel Shock Controllers are…
Made this controller wall mount holder because I didn't want to use screws. You can use any double-sided type you like ( the one I used ). Stick two lengths to the back (see picture 4) and stick it to a wall and you're done. I've been…
This is a higher tollerance version of the top mechanism for the deckmate by Elegant. If you're having issues fitting the top and bottom mechanisms together, try giving this a shot.
Alternative parts for the STS Endeavour by Martin. I also add images of print orientation. Note some parts have been split up. All parts are remixed with a 0.1mm Tolerance. For most this will mean the parts snapfit together. If parts are…
Une commande spéciale que j'ai réalisé pour un enfant fan de Roblox que je partage pour ceux que ça pourrait intéresser. Ce fichier est imprimable en multi-couleur avec une imprimante Mono-Couleur Technique d'impression Vous trouverez…
Holder for joycon grip and the straps. Use the m3 insert to attach it to the honeycomb storage wall. Or a screw to just screw it to the wall. Designed to print without supports. Update: I've added a new version that Uses a empty insert to…
Don't know the tollerance you want for the pins and holes while designing your models use this tool to test it. The test tool has a 0.5mm hole and pin, the tester blocks indicates how the tollerance. (The hole holes get incrementally…
🛠 CalibraTest 5X è il tool definitivo per testare tolleranze meccaniche e precisione dimensionale della tua stampante 3D. Progettato con fori e alloggiamenti calibrati da 0.05 a 0.30 mm, ti permette di identificare facilmente errori di…
I found it difficult to insert the various disks (cam parts) into the 2 respective pins (Cam_d1 and Cam_d2) so I redesigned the two pins increasing the tolerances by 3 tenths, so it should work for all printer EDIT: I found it impossible…
Good morning friends, today I wanted to bring an old project that I find very useful to discover the degree of tolerance that have our printers. The tolerance test includes two types of shapes, one square and one round. It also has 6…
Lips Cake Topper Modern and simple cake decoration. Infill: 30% Layer Height: 0.18mm I used diffenent layer heights for the different colors.
Designed with holes in 3 common screw orientations (0/45/90 degrees) to test printing tolerances for best performance of self taping screws.
A perfect minimalist stand for all your Xbox series X/S and Xbox one controllers
6x M3 30mm bolts required. Adhesive backed black felt is used to line the inserts.
Simply go to “change parametres” in Fusion 360 and add your desired magnet size, the rest just adjusts itself. The sizes go from smallest clearance where the cut out is on the left to largest (no cut out) on right. If you decide to get a…
Decided to make a din rail enclosure for a cheap stepper motor driver/controller, taking inspiration from VFD's used at work. First model built using FreeCAD vs ThinkerCAD, a bit filament wasteful for now due to lack of FreeCAD knowledge.…
3 bulloni creati con creazione di filettature ISO Filettatura ISO standard Filettatura ISO con aggiunta di tolleranza -0,2 mm solo su dado Filettatura ISO con aggiunta di tolleranza -0,2 mm sia su dado che su vite
I have just acquired a second-hand DJI Phantom 3 standard ; unfortunately, the phone holder mount was broken. I was looking all over the internet (with no success) to find that specific part with ball at the end, that holds the phone clip…
A Tollerance Test, 0.20, 0.21, 0.22 0.23, 0.24, 0.25
test tolleranza con foro da 5mm
ACHTUNG! - ES WIRD EINE: “ Druck Feder 0.5x6x40mm ” und “ Doppelseitiges Klebeband ” BENÖTIGT! (Die Druck-Feder ist für den Hals und das doppelseitige Klebeband, um ihre Figur an einer Oberfläche zu befestigen)…
Adapted the two remixed files to work with this. You need 4 3mm screws and nuts for the clamp. The stroller pole is ~1
666(perimeter/top/button) 50% infill.. material petg
I printed the model in 2 parts and put toothpicks through the holes to bind them. The holders are horizontal and the controllers can side off without any resistance. Lay it flat and print without supports. Infill 20% with Cubic pattern.…
The protective box for the Hercules DJ Control Mix is a durable and customizable storage solution designed to keep your gear safe and organized. It features dedicated compartments for the controller and a cord winder, with extra space…
with new fast firmware we have to improved something like fo eliminate vibration. 666(perimeter/top/button) 50% infill.. material petg
Für ein selbstgebautes Enclosure aus Holz habe ich diesen Platinenhalter mit Achsverlängerung gebaut um es in ein Gehäuse zu montieren. Der PWM; Controller ist von Amazon mit der Nr. PWMController E297S. Die Achsverlängerung unbedingt mit…
Remix of: https://www.thingiverse.com/thing:4253573 The dimensions of the original thing are not matching my controller. Others reported similar problems. Changes made: Extended gap to 42mm Shrunk clip height to 6.5mm Print Settings…
same as multicolor version
A cover that can be used to cover the Sunbeam heated throw controller's lights. No support needed.
Also remixed from ivtue's excellent NR200 controller holder found here: https://www.printables.com/model/541806-nr200-controller-holder I kinda just mushed the two together and filled some holes to get the design you see now. There is a…
will need supports enabled for the best quality, PLA is reccomended (I reccomend organic supports)
Was able to find a new Arc controller on buy/sell for cheap but did not come with the adaptor plate to convert the digital pro controller to the newer Arc controller, Built this adaptor and figured others may also need it. Just need some…
6x M3 30mm bolts required. Adhesive backed black felt is used to line the inserts.
I have just acquired a second-hand DJI Phantom 3 standard ; unfortunately, the phone holder mount was broken. I was looking all over the internet (with no success) to find that specific part with ball at the end, that holds the phone clip…
