Counting matching models…
Made this to replace broken tie rod holder for 2015-2020 F-150 Undercover ArmorFlex tonneau cover. Part fits somewhat loosly in rails which makes installation and moving a breeze, but when they are clamped on tie rod, they stay put.…
Print approx. €31.63–€38.65 excl. taxPreliminary estimate for PETGSource material: PET
At this point there have been enough success reports that I think it's safe to say this fits most trucks with fairly wide slots for 2x8" bed dividers. Known good list is below. I'm sure there is a reason the Chevy Colorado has about ½" of…
bonjour j'ai modelisé un pot en crayon en forme de tonneau simple mais sympas il est imprimable avec juste un petit support pour le bouchon dimension 110mn en hauteur et 80mn de diamentre je vous inclue un fichier fusion 360 si vous…
This is a replacement prop rod clip for a Rev Industries (OEM brand for BAKFlip) hard folding tonneau cover. It can be installed by slipping onto the end of the rail and sliding into place, or by snapping it on at the desired location. In…
Toyota Hilux tonneau cover brackets and clips tend to crack or break over time as they are usually in the sun become brittle and break. You cant get these parts loose and a new tonneau cover is $$$. Print replacements, and use them as the…
Fits the Ford F-150 Hard Roll Up Tonneau Cover (might fit other models that I'm not aware of): https://accessories.ford.com/products/f-150-2015-2021-hard-roll-up-tonneau-cover-for-5-5-bed-1 Print Instructions: Material: UV and temperature…
everything is fixed with M3 screws except the bearings which require M5. it was made to print easily without any supports. I did it myself to prepare my pieces for electroplating. I advise you 4 bars inside the jar for a good rotation I…
Didn't secure the cover when folded and it flipped open and broke the hinge. These are replacements for the smaller rear hinge. I printed one flat with no supports and one vertical which required one small support. Put one on each side,…
Easy to print replacement prop rod retaining clip for UnderCover tonneau pickup truck bed covers. Design improved over original to add strength, while remaining easy to install. Prusament PETG at 100% infill works great.
Tonneau cover strut retention is a small plastic clip that the cover strut snaps into during travel. REV01 added rib for increased strength. Tonneau cover is made by BAKFlip, model 448329;…
Matchbox Rola-matics number 57 Wild Life Truck. https://matchbox.fandom.com/wiki/Wildlife_Truck Mine came without the topper or the little animal spinny thing, leaving an ugly spinning disk in a shallow truck bed. This is how I fixed…
This is a cap to replace a broken one from a Dodge Ram 1500 Tonneau Cover to keep the elements off of your lock. I recommend TPU for printing material. I also had supports because of the Ram logo and it resulted in a checker board style…
A tonneau cover for the 1:20 Scale Rivian R1T diecast model available from the Rivian Gear Shop. Models for the Rivian V1 powered cover and the Interrobang manual cover are included. I used Polymaker Carbon Black for this print.
A remixed model shim to keep the plastic bed rail from twisting or warping when OEM Toyota tonneau cover is installed
With 0.20mm layers, I set top and bottom shells to 2 layers. With this I was able to get a single layer of 20% gyroid infill. I don't know how consistent the Maisto quality control is. I designed this for a snug fit and the front edge is…
Simple remix with TRD Pro logo. Category: Parts
I recently put a MaxMate tri-fold style tonneau cover on my ‘21 GMC Canyon and wasn’t pleased with how the rear of the cover wouldn't sit flat on the tailgate. Upon looking into it, I realized that the rear stake pocket of the truck is in…
These are additional or replacement shock cord clips for clip over rail type tonneau covers that have an oversize load system. Print in PETG or other filament that is good for outdoor use Relevant settings I used: .10 layer height 3…
Toyota Tundra bed plug modified to fit a ½ inch drain tube. at a slight angle toward the cover. This is to protect both the tube and plugs, but also makes the use of the bed easier since it keeps the drain tubes out of the way. Print the…
This tool can be used to install or remove the tonneau cover lock ring with ease, and without damaging the ring or tonneau cover.
Print replacements for the clamp positioning clip used during installation of UnderCover tonneau cover mounting rails. Low infill allows for more deformation and easier installation. PETG recommended.
I designed this clip after buying my GMC Sierra EV Edition 1 and receiving a soft tonneau cover with it. As soon as I installed the tonneau cover I could see how easily the front lip of the cover could (and did) separate from the front…
Left and Right brackets for MOPAR roll-up tonneau cover for Jeep Gladiator 2022+. I bought a cover with a broken bracket, and I wasn't able to find a replacement part for sale, so I made one. It's not perfect match, but it fits and works…
This is a tonneau cover for the HotWheels '83 Chevy Silverado. There are several on Makerworld, and although they do fit ok, they're shallow and don't stay on. I've made my own, and included a couple of extra tabs that slip into slots in…
This clip fits inside the bar that holds a soft bed cover in place. It camps on to the side of the ute bed. No fixtures are necessary, but it is highly recommended to use a high temperature plastic such as ASA because the covers tend to…
A tonneau cover for the 1:20 Scale Rivian R1T diecast model available from the Rivian Gear Shop. Models for the Rivian V1 powered cover and the Interrobang manual cover are included. I used Polymaker Carbon Black for this print.
Left and Right brackets for MOPAR roll-up tonneau cover for Jeep Gladiator 2022+. I bought a cover with a broken bracket, and I wasn't able to find a replacement part for sale, so I made one. It's not perfect match, but it fits and works…
This supports the bar that holds the soft tonneau cover. It keeps the bar from moving and rattling.
I recently put a MaxMate tri-fold style tonneau cover on my ‘21 GMC Canyon and wasn’t pleased with how the rear of the cover wouldn't sit flat on the tailgate. Upon looking into it, I realized that the rear stake pocket of the truck is in…
Created this work truck solid tonneau bed cover Repair for close friends running a horse ranch in Arizona. I was asked if I could design a repair for a 40mm+ hole that went through the trucks solid bad cover. I created several prototypes…
This is a replacement drain cap for a Bakflip MK4 Tonneau cover. All of mine broke and rain would leak into the truck bed! This was specifally designed for a Ram 1500 with Ramboxes. There are 2 adapter options, one for the Bakflip OEM…
The rod support clip supplied with Bakflip covers is notorious for breaking any time it is bumped or hit and anyone that owns one has replaced them many times over. The original design holds the rod by the side with one of the plastic…
*This is for the body of the lock, not the actual locking lever. Mine snapped where it connects to the cross bar so it no longer would lock the cover down on one side. This cover is on a 2013 Ram 1500 using a Gator soft tri-fold tonneau…
Replacement hook for soft cover tonneau covers. Tested on 2015-2020 Chevy/GMC Colorado/Canyon soft rollup tonneau cover.
I lost one of the clamps for my truck cover. This is a copy of the original aluminum ones printed in PETG-CF. It's holding up just fine for now. It only replaces one of the clamps. Printed with 5 wall, 5 top and 5 bottom layers. I used an…
Petit pot a crayon en forme de tonneau a imprimer si possible avec du PLA couleur bois ! imprimer en couche 0.1mm pour un meilleur rendu…
I basically made this for a mate who is am avid supporter of the Australian NRL team, Penrith Panthers. As it was going to be ‘portrait’ orientation as a display I thought to make a stand/mount for it also. Happy to give the .stl to…
cerclage 1 et 2 à imprimeer deux fois thermosouder au fer les cerclages sur le tonneau
This supports the bar that holds the soft tonneau cover. It keeps the bar from moving and rattling.
I wanted a bike front fork mount that didn't require permanent mounting to my truck, and could be stored in the truck ready to go under my tonneau cover when not in use. I designed this to clamp to a cargo stabilizer bar that could be…
Replacement hooks for the retainer straps on a TruXedo Truxport tonneau cover. The 25mm webbing on the straps slides in through the slit on the bottom. It can be a bit tight, so it may take a little manipulation to get it in, but it will…
I purchased a Gator FX quad-fold tonneau cover and both of the prop rod clips arrived broken. I didn't like the quality of the clips so I designed my own. These are much more robust then the vendor supplied clips. The design allows for…
Extang said they no longer have the bracket needed to connect the buckle clip for the folded tonneau cover. Print instructions I printed the bracket on the side for additional strength. 4 layers and 50% infill. Might be able to get away…
This 3D model illustrates an innovative cable pull mechanism designed to enhance the functionality and reliability of existing cables on a Tonneau Cover, a popular truck bed accessory that provides cargo protection and security. This…
Print two of them and they should snap tightly together around the cord to make pulling on it easier. Have had it on my truck bed cover for 3 years now with zero issues.
C'est une voiture de la famille Richard (Tonneau) que j'ai modélisé sur inventor. C'est un modèle décoratif, mais qui peut être très bien imprimé en petit avec une imprimante SLA pour servir de pion pour un jeu de plateau. Le modèle n'est…
I went to turn the mounting knobs for my Bakflip FiberMax tonneau cover for the first time in a while, and the cylindrical part of the knob that holds the threaded nut completely disintegrated with no force at all. Both knobs just fell…
The rigid Dodge tonneau cover on my brother's RAM 1500 pickup truck has latches with key locks that face up. Dodge provide rubber covers that didn't hold up to the sun very well. They both eventually disintegrated which leads to iced-up…
I modified it to assemble with screws instead of glue. It uses two M3 screws and nuts and one M4 screw and nut to assemble the two parts together. I've included the STEP files in case anyone wants to modify it further.
This is a TPU all weather cap for the locking mechanism on Diamondback tonneau covers. Originally, my son wanted it to prevent the metal locking mechanism from marring his coated HD cover when folded all the way open, which is not a…
After purchasing a 2024 Ford Maverick XL, I wanted a tonneau cover and rack system that would fit my truck. I decided on the RealTruck TruXedo Elevate CS Rack System paired with the RealTruck BAK Revolver X4ts Hard Rolling Truck Bed…
This seal profile clips onto the existing arrow shaped rib that runs underneath the roof bed top cap and folds onto the last tonneau slat when closed to channel any water to the outside bed drains. Reduces the amount of driving rain or…
