2,642 models
A Multi-Use Case can't fit every situation. Because of this, I designed this toothbrush travel case in the same style as my Multi-Use Case . I have designed it to be as compact as possible, but still fit as many styles of toothbrushes as…
Print approx. €0.44–€0.53 excl. taxPreliminary estimate for one variant
Original model was good, except for the hinge, it's a perfect candidate for printing in place. That's my first print in place model, so any hints, makes, comments are very appreciated! Print settings PLA 0.2 height 3 perimeters 30% infill…
Print approx. €0.73–€0.90 excl. taxPreliminary estimate for one variant
Reduced size, edited for better fit in. Remixed from: https://www.thingiverse.com/thing:4569222
Print approx. €0.89–€1.09 excl. taxPreliminary estimate for one variant
Small and robust travel case for Oral-B electrical toothbrushes. It's a one-print-design with joints that rotate freely, yet without wobbling and the small clip makes sure that the case doesn't open accidentally. To be on the safe side…
Print approx. €1.39–€1.70 excl. taxPreliminary estimate for one variant
A 3D Printed Toothbrush and Toothpaste Holder. This holder offers a stylish and convenient solution to store and display your oral care essentials in an elegant manner. Designed with both functionality and aesthetics in mind, this holder…
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant
Inspired by the toothbrush-chaos in most of the shared appartements I know, I wanted to design something that would solve that issue in the most simple and effective way possible while also being space saving and elegant to look at. It is…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
PLA, with support (maybe PETG) Best to print with a 0.6 mm nozzle (time savings). Stick to the tiles using double-sided tape.
Print approx. €5.23–€6.40 excl. taxPreliminary estimate for one variant
Update 03.02.2023 Added additional model, “rugged”. This one has thicker walls and an improved snap lock. It uses a little bit more material to print compared to the original model. Both models are available for download. Description…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for PETGSource material: PET
Oral-B Toothbrush Holder This one is a more simple version from the once you can find. I did not wanted to have a big piece where you could store more than just the toothbrushes. Therefore, I designed a slim-version. Enjoy.
Print approx. €3.40–€4.15 excl. taxPreliminary estimate for one variant
Reworked the German plug version of this Oral B toothbrush charger holder to accommodate the US plug model. The extra length of wire can be tucked into the bottom cavity for that sleek look. The plug holder has small tabs to retain the…
Print approx. €3.20–€3.91 excl. taxPreliminary estimate for PETGSource material: PET
Hello everyone I just wanted to design an easy toothbrush and toothpaste holder for 2 toothbrushes and an toothpaste. So just print it out, have fun and start your new day with a smile;-) I would recommend to print with support
Print approx. €7.01–€8.57 excl. taxPreliminary estimate for one variant
Use strong double-sided adhesive tape to stick it on the wall
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for PETGSource material: PET
Organizer for Oral-B electric toothbrushes, fits 4 plus one charger. Highlights Removable drip tray for easy cleaning. Neat management of charger cable. Elegant minimalist design. Easy print, no supports needed for any part. Printing Tips…
Print approx. €0.89–€1.09 excl. taxPreliminary estimate for PETGSource material: PET
At long last, the electric toothbrush has a functional, aesthetic and permanent place in the bathroom- and it's not the sink countertop! The induction charging base, which used to only appear during weekly recharging, nests perfectly in…
Print approx. €2.78–€3.40 excl. taxPreliminary estimate for one variant
A perfect gripper to hold your toothbrush, realized using a compliant mechanism. It prints fast (16 minutes), needs only 2g of filament. Its print-in-place, no supports are needed. Its automatically gripping your toothbrush and only…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
This is a remix of 3aDri's Oral B toothbrush stand . I found that the peg was a bit too tight for my Pro 6000 toothbrush, so the stand would stay attached when I picked it up. I shortened the peg and then made adjustments to the pedestal…
Print approx. €0.83–€1.01 excl. taxPreliminary estimate for one variant
Had the issue that in our family, all have an electric toothbrush. They were standing next to the sink and always fell over. So I created this stylish toothbrush holder for the 4 of us (there are 2 bigger holes for the parents toothbrush…
Print approx. €8.09–€9.88 excl. taxPreliminary estimate for one variant
Holder/stand for 3 Oral-B iO toothbrush heads.
Print approx. €1.16–€1.41 excl. taxPreliminary estimate for one variant
Toothbrush Stand with nice teeth
Print approx. €2.30–€2.81 excl. taxPreliminary estimate for one variant
This is a remix of my previous model Oral-B Electric Toothbrush Station , here reduced in size to fit two toothbrushes and one charger base. Highlights Removable drip tray for easy cleaning. Neat management of charger cable. Elegant…
Print approx. €0.47–€0.58 excl. taxPreliminary estimate for PETGSource material: PET
Print-in-place remix of Toothbrush Travel Case by James Printed at 0.2 mm with default settings on PrusaSlicer. The hinge may be a little stiff at first - just open and close it a few times to loosen it up. Update: Added v2 files with a…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
This is improved Toothbrush Travel Case https://www.printables.com/model/251919-toothbrush-travel-case with following improvements: prints in-place little holes for proper air ventilation nicer elliptic handle hole, including less prone…
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for PETGSource material: PET
The source marked this model as adult content.
Print approx. €8.10–€9.90 excl. taxPreliminary estimate for one variant
Just glue the front and the body.
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for PETGSource material: PET
Print with PLA. Rotate model, so no need of supports.
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
This model was inspired by my mother who asked me to design her a toothbrush holder. I ended up using it for myself instead. Parts For assembly you will need: printed parts 4 x rubber feet of your choice with a max diameter of 9mm For…
Print approx. €8.06–€9.86 excl. taxPreliminary estimate for PETGSource material: PET
This screw together case keeps your toothbrush clean and safe while traveling. It needs to be printed in spiral vase mode. Since it is in vase mode, you need to print each part separately. I used a 0.6 mm nozzle with 1 mm external…
Print approx. €0.69–€0.85 excl. taxPreliminary estimate for one variant
Toothbrush holder for five toothbrushes. Hole diameter: 17 mm Print without supports
Print approx. €6.65–€8.13 excl. taxPreliminary estimate for one variant
This model is a quick adaptation of the original model to fit two instead of four brush heads to fit my needs. The model printed well without supports on my Prusa Mini with PLA filament.
Print approx. €2.26–€2.76 excl. taxPreliminary estimate for one variant
Traveling case with aeration holes and a sliding lid for Oral-B electric toothbrush with 2 heads
Print approx. €5.20–€6.36 excl. taxPreliminary estimate for one variant
Freestanding or can be attached to a surface with mounting tape. Version 1a This is a fraction larger to fit the older Sonicare models (I did have a Sonicare HX8911/04 that I bought in 2017 that slightly bigger). Our newer Sonicare 4300s…
Print approx. €1.61–€1.96 excl. taxPreliminary estimate for one variant
Printed on a Bambu X carbon, 0,12 layer height, tree support and gyroid filling.
Print approx. €4.53–€5.53 excl. taxPreliminary estimate for one variant
A gridfinity charger for your Sonicare Toothbrush.
Print approx. €3.42–€4.18 excl. taxPreliminary estimate for PETGSource material: PET
A shelf for storing toothbrushes. Dimensions of the shelf (LxWxH) 220mm x 60mm x 100mm Height for doble-sided tape 25mm Material PETG or Any Support Yes, organic (recommended) Mounting: Add pieces of 20mm double-sided tape ( 3M tape…
Print approx. €10.71–€13.09 excl. taxPreliminary estimate for PETGSource material: PET
An elegant toothbrush stand for 3 toothbrushes of model Oral B. The hole where the toothbrush is placed is 28mm in diameter so the toothbrush can't be larger than that. This is just a stand and has nothing to do with charging the…
Print approx. €4.16–€5.08 excl. taxPreliminary estimate for PETGSource material: PET
A stand for the Dontodent electric toothbrush from DM . Recommended settings: Perimeters: 4 Changelog: v8 Decreased the risk of breaking of the stem v6 Initial version
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant
Toothbrush stand / holder for 1 Phillips Sonicare Recommended to print from PETG (doesn't hate water that much..) Used default slicer settings, no need to modify anything. It can lay flat, or you can add generic silicone feet (from any…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for PETGSource material: PET
Requires support for the U-hook only. As this support structure is high and hence quite a long lever, there is a risk that it detaches during printing. I could successfully print the attached gcode reproducibly at 70% printing speed (and…
Print approx. €1.48–€1.81 excl. taxPreliminary estimate for one variant
Toothbrush Holder that fits the curved wall in the Winnebago View/Navion 2023 24V. The model is attached to the wall using 3M Command Large Picture Hanging Strips. There are grooves on the back side of this model so that the strips are…
Print approx. €8.96–€10.96 excl. taxPreliminary estimate for one variant
Description This 3D-printed toothbrush holder is designed specifically for Braun Oral-B Pro 2 electric toothbrushes. It allows for easy wall mounting, saving space and keeping your toothbrush conveniently accessible. The holder features a…
Print approx. €1.22–€1.49 excl. taxPreliminary estimate for one variant
Dual Toothbrush stand / holder for Phillips Sonicare + Curaprox interdental brushes (from the set - one square, one round) Also has a slot for Elmex gel (or small toothpaste 10-25ml) OR you can download a model without the slot.…
Print approx. €1.86–€2.27 excl. taxPreliminary estimate for PETGSource material: PET
There are several models, but as it did not suit me, I created mine. I did it with a slope so that the water was evacuated. The model must be printed in PETG to resist moisture.
Print approx. €0.84–€1.02 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix of my remix of @Charleszard Sonicare Wall Mount Charger . This version has a larger opening to allow variance for plugs with a larger back, as a special request from Eug @euggersh .
Print approx. €4.75–€5.81 excl. taxPreliminary estimate for one variant
Xiaomi T300 toothbrush will be cut using a rotary to be able to access the battery or fix the board, This is a fix to seal it back. I printed it with the default speed and configuration or Cura Note: the Toothbrush won't be water…
Print approx. €0.78–€0.95 excl. taxPreliminary estimate for one variant
I've added additional perimiters (4) to prevent water leaking inside - hope it's enough :) Infil is set to 15%, with grid fill pattern. Filament used was Prusament PETG Signal White. Made for Phillips Sonicare (Width at base: ~3cm,…
Print approx. €3.95–€4.82 excl. taxPreliminary estimate for PETGSource material: PET
Made myself toothbrush holder with dividers and removable drip tray. The drip tray does not snap on.
Print approx. €3.20–€3.92 excl. taxPreliminary estimate for PETGSource material: PET
Holder for an Oral-B Pro (Type: 3710) Toothbrush and a wide-cap Toothpaste tube. I printed with these settings: Layer Height: 0.15 mm Infill: 50% Lines Walls: 0.8 mm (2x 0.4 mm) Top/Bottom: 0.9 mm Line: 0.4 mm Z Seam Align: random Scarf…
Print approx. €1.07–€1.31 excl. taxPreliminary estimate for one variant
Holder for 2 toothbrushes and toothpaste, includes a removable drip tray and feet.
Edit 06-07-2021: Model with drainholes is now available ;) A toothbrush holder to bring cuteness and magic in your bathroom Print instructions This little tooth is ready to print. Layer 0,2mm Infill 5% to 10% No support needed Brim is…
A timeless ribbed holder for toothbrushes and toothpaste. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+ premium 3D models – with new designs every week ! 🔧 Includes STL + Fusion 360 files…
Design can only be manufactured with 3D printing and will definitely catch anyones attention! Print tip: print in PLA with low print temperature and sufficient cooling to print the voronoi cell overhangs. CREATE CUSTOM 3D PRINT MODELS ON…
This is an OralB electric toothbrush head protector/case for when travelling, it can stop dirt and other items from touching the head of your toothbrush. Includes air vents to prevent moisture build up inside the case. How to use - place…
A small improvement/remix of @PsychProd gorgeous model of Smiling Toothbrush Holder . It fixes some strange artefacts and empty internal pocket in the model. It also widen model to fit kids electric toothbrush “ Bob a Bobek ” and…
A great ribbed set consisting of two toothbrush cups and a matching base in which both can be placed. Creates some order in the bathroom. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+…
Every model I found for hiding the cable of the Braun / Oral-B toothbrush wall charger was not enough good/polished/perfect/minimal for me so I designed this and I hope you will enjoy this too. The design is based on the german 55mm…
A toothbrush holder shaped like a tooth remixed to keep the toothbrushes upright . It has a modified cavity that has a flat bottom instead of a paraboloid bottom and has 4 walled off compartments. There are two versions available to…
A bigger version of the toothbrushholder “Tooth” - but not only scaled up… Its 15cm high and I redesigned the inner space: I made it bigger, also with a bigger hole at the bottom and 4 (thinner) inner connected separation walls… Also i've…
After using the V2 for some time, I've figured that the model is a bit unstable, and the tooth brushes had a tendency to slip from the hexagon grid, I also had the need to add another toothpaste holder. So, I've tried my best to improve…
------------------------------------------------------------------- Version V2 Toothbrush Holder V2 - for 2, 3 and 4 brushes by G4ZO | Download free STL model | Printables.com…
Toothbrush Case with Ventilation
I've designed this toothpaste holder with three 15mm and one 40mm hole. With the right settings I did not used any support, but I highly recommend using Brim because of the small contact surface. 0.4mm nozzle, 0.2mm layer height. Have Fun!
Print in the up position with PLA, without the support and brim.
This is the small variation of the holder. Designed for small items. Print instructions Prusa i3MK3s 0.2 20% Infill Printed on the side without supports.
This is decoration for your house. Make your house beatiful with this decoration. Nice gift four your family and friends. More models in my profile.
A print-in-place travel case for 2/4/6 Oral-B toothbrush heads (Vitality/Pro/Smart/…, NOT iO/Pulsonic), including 2/4/6 stands. Before that we just carefully placed them upright somewhere, but they often fell over. I had several…
A fun toothbrush holder for your bathroom. The base .stl file has a solid base and solid stick figure. The arc-effects were created in Prusa Slicer. You can either use the .3mf files included or see this Prusa blog on modifier meshes to…
Textured Bathroom Organizer - Toothbrushes & Paste Now part of the [Textured Bathroom Collection] https://www.printables.com/@Shars/collections/3485934 Expand your bathroom setup with matching accessories, including the new Wall-Mounted…
Hi threeD Printers , this Oral-B Stand is designed to keep mold and gunk away from your Oral-B toothbrush and brush head. Practical and hygienic, it's a great solution for maintaining cleanliness. If you use the toothbrush's charging…
If you are one of the billions of people who keep their toothbrushes in a cup, put this functional model in your print queue. Help me create more FREE models! If you like the stuff I create, consider joining my printables club as a…
Design toothbrush cup set with coaster and three toothbrush cups. Easy to print. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+ premium 3D models – with new designs every week ! 🔧 Includes…
Compact bathroom organizer combines functionality with a clean, modern aesthetic.
Turn your toothbrush area into the "No Swamp Zone" with this holder – because even toothbrushes need their dry land! No soggy surprises, just dental delight. A holder that I designed for a toothbrush to prevent the water that always…
Wall mount for toothbrushes
Electric toothbrush holder for 4 toothbrushes. should fit most if not all oral-b electric toothbrushes
We liked the design by gamingoodz on Thingiverse but we wanted to use some old toothbrushes to clean the bicycle chain, so we modeled this. It should fit most normal toothbrush models around and uses two M3 screws to keep the cover in…
Intro Welcome! This is a very cute and stable looking travel case for toothbrushes. Your wife or girlfriend will love it! It's printed in place with a hinge. There are two different sizes for download at the moment. S for Dr. Best…
A cup for toothbrush and toothpaste that looks like a tooth
Its an case for your toothbrush. No matter where you go or stay. It´s keeps your toothbrush nice and clean. It also features ventilation holes. You need to change the orientation in the slicer and maybe change the angel which it lays on…
A remix of: Oral B Toothbrush Double Charging Stand Holder by Fresh3Design However, I removed the second toothbrush holder, as one would be on the charger at all times, and used that space to hold the brush heads (we like to let these…
A holder for the Oral-B rechargeable toothbrush, that fits into a danish outlet socket (and maybe others).
toothbrush holder. Print in place. Snaps closed. There are two sizes. large 1, small 2 with the same pivot gap. The GAP on print in place often can't be scaled. When you scale a file it also scales the gap. Depending on the details of…
For a while wanted to create a toothbrush holder for our bathroom and finally got around working on it. Wanted the holder to have space enough for a good amount of brushes. I also wanted some place to put the toothpaste tubes (the ones…
Органайзер в ванную комнату для для зубной пасты, щетки, и т.п.
This is a simple toothbrush travel case. If you travel, and you brush your teeth, this model might be right for you.
Cute holder for your electric toothbush heads. Remix of BMoArtist Cute Dinosaur Toy, creating a funny brushosaur for your bathroom. Works with Oral B toothbrush heads. Adapter piece is 8,8mm in diameter.
This (very) fast-printing toothbrush holder has been designed to print in vase/spiralize mode for quick printing times and low filament usage. It has a simple and modern hexagonal design, and holds either two or four toothbrushes with no…
Your travel companion for toothbrushes etc. A modern, ribbed and sturdy travel case for your toothbrush and toothpaste. The standard dimensions when put together are 205mm x 60mm. It can be scaled as needed. 🚀 Support My Work &…
Just print it and thank me later. If my work inspired you, a coffee would make my day. https://buymeacoffee.com/odemir
Final and more stylized toothbrush / toothpaste holder. Very happy with the sleekness of the design. Fits three flat standing or standard twist top tube of toothpaste and holds four toothbrushes. My initial first two designs are below.…
Toothbrush Stand： Electric_toothbrush_holder_single.stl Electric_toothbrush_holder_double.stl Toothbrush wall mount： toothbrush wall mount x1.stl toothbrush wall mount x2.stl Drill two holes on the back of the mount and mounted on the…
I changed the other Version an ad an second Bearing, now its moved smoothly and feels fine. Additional the Snaphook ist optimized an i change the design of the lower area. Ich habe die idee des Transportschutz aufgenommen und nachgebaut.…
This toothbrush holder has a sloped section to drain excess water into the sink.
Oral-B holder for 2 toothbrushes. The design was verified on Oral-B Pro 2, but also should work with most Oral-B toothbrushes with the same charging base. Two designs with different hole sets (all for M3 screws) can be mounted on the wall…
A simple remix of the original model, just cut down to 4 holders so it's a little narrower.
Zahnbürstenkopfhalter für Oral-B A remix of Devilscave's fancy toothbrush holder that holds a single Oral-B head at an angle, so it doesn't leave that gunky mess you eventually get under the vertical stands.
I didn't find a travel box for the same kind of toothbrush that I have, so I made one. The brush snaps to the case by the neck and is easy to remove by hitting it to your hand. The top also snaps to the case. I neede these fast so had to…
remixed from https://www.thingiverse.com/thing:3356851 merged for single colour printing, I also added a small drainage hole.
This bathroom arranger is a remix of this one: https://www.thingiverse.com/thing:2144322. (It was published before I had my own acc.) It has deeper holes for holding and also more things to hold. This holder is without the 'Tooth Brush…
A modification of the toothbrush travel case for Oral-B bruches.
Elegant, simple toothbrush holder. Print in different colours for different family members or to match your toothbrush! Easy to print with no supports @3DPrintBunny
