Counting matching models…
1. Glue the front panel to the border 2. Align and glue the maple leaf and the letters to the front panel 3. Insert and stick the LED light strip of your choice on the inside of the border(i used this one) 🠋🠋…
This is my first big model, and I think it turned out pretty good. Assembly is simple, the top of the CN Tower prints separately and you just need to snap it on but the city part is all one piece. I printed at .02 millimeters with a 0.4…
3D printable topographic miniature of Toronto | Skydome and CN Tower - 🇨🇦 Canada Capture the beauty of Toronto | Skydome and CN Tower 's city landscape with this topographic miniature! This 3D model represents the geographic area around…
I designed this hype chain to showcase this awesome alternate logo. This was designed for a single color printer, using pauses and manual filament changes. No support needed The filament color sequence is as follows: Start with red @…
This is a 1:500 scale model of the 2025 Roger's Centre, or the home stadium of the Toronto Blue Jays. The walls were scaled down 1:500, but then the height was put on 6x afterwards so it was more visible. DISCLAIMER: This is a fan-made,…
A simplified 3D Model of Union Station in Toronto, Canada I've noticed on occasion the left block of union will get one or two raised layers, I recommend just using a negative volume on it. if thats something you'd be bothered by. I did…
Parameters tested with 0.4mm nozzle 0.2mm layer height 15% infill 3 top layers Ironing on all top layers For multi material prints Each part is labelled with the color to be used. Add all the files to your project at the same time and…
3D model of Downtown Toronto. Recommend for best quality: Layer height: 0.12 Infill: 10% No support needed
This is a set of top and bottom brackets to build a robust but lightweight inlet for the Enders Alubox Toronto 63l. With the provided measures, you can fit three inlets into the box. You need: 4 of both models bracket_v2 has screw holes…
Toronto Maple Leafs NHL team golf ball marker (25mm diameter by 2mm height and 10mm spike). 2 versions available (embossed for SLA and single filament FDM printers and a multifilament version for multifilament FDM printers). Usage Place…
Toronto Blue Jays MLB team golf ball marker (25mm diameter by 2mm height). Two versions included recessed logo version (good for single filament and SLA printers) 2nd color logo version (good for multifilament printers) Usage Place on the…
A simple Toronto Raptors Christmas ornament to add to your Christmas Tree Powered by MakerWorld-Christmas Ornament Maker (https://makerworld.com/makerlab/christmasOrnamentMaker) Enjoy the Collection: Spinning Toronto Maple Leafs Ornament…
A simple Toronto Maple Leafs Christmas ornament to add to your Christmas Tree Powered by MakerWorld-Christmas Ornament Maker (https://makerworld.com/makerlab/christmasOrnamentMaker) Enjoy the Collection: Spinning Toronto Raptors Ornament…
Here is the awesome looking Toronto Raptors Oversized Necklace, Pendant! Hope you guys enjoy! Fits with the standard oversized chain you can find here on Makers World. Want a Commercial License to sell my prints? Join my Patreon or Thangs…
5 mm coaster, 10x10 cm square. Prints in two colors, works great if you're equiped for dual color layers. I recommend printing face down to have better feeling and smoothness of the coaster. I printed it in PLA with 0.4mm nozzle diameter.…
You can also flip it around if you don't want the build plate textured finish on the top surface. :)
1. Glue the front panel to the border 2. Align and glue the maple leaf and the letters to the front panel 3. Insert and stick the LED light strip of your choice on the inside of the border(i used this one) 🠋🠋…
A representation of the Toronto Union Station Shed in N-scale (1:160), to span 4 pairs of tracks in a station yard. All of the parts in the two "ALL" STL files are required to do two rows of the shed. Repeat as desired based on the length…
Toronto Bluejays Oversized Necklace Logo that I designed. I hope you enjoy!
Toronto Maple Leafs Oversized Necklace Logo that I designed. I hope you enjoy!
Toronto Raptors Oversized Necklace Logo that I designed. I hope you enjoy!
Toronto FC Oversized Necklace Logo that I designed. I hope you enjoy!
3d miniature of Toronto, Ontario! Check out my collection of other miniature cities: https://www.printables.com/@jarvizar/collections/1124416 I also have an updated Multi-Color version of this model (and many other exclusive miniatures)…
I designed a group of NHL themed cookie cutters. Make some cookies with these to support your team throughout the playoffs! Not all filaments are food safe. Please post a make! Happy printing!
How to construct an egg cup and design it in a CAD you can see on https://nerd-corner.com/solidworks-tutorial-egg-cup-with-solidworks-revolved-boss-base-and-fillet-feature/
110mm in diameter and 2.5mm thick. The hole at the top was so I could hang it on the wall, the model doesn't have this but it's very easy to add in any slicer program. Pause around layer 8 to change colors. Printed on: Ender 3 V3 KE…
This 3D-printed model represents the iconic CIBC Commerce Court North Tower in Toronto, Ontario — a landmark of Canadian financial architecture. Completed in 1931 and standing at 145 meters, it was once the tallest building in the British…
Summary The Toronto Raptors are your 2019 NBA Champions!! This half dome features the signature Raptors' claw logo, and can be customized with your favorite jersey colors during the Raps' history. Featuring a Flexi Raptor designed by…
3D printable topographic miniature of Toronto - 🇨🇦 Canada Capture the beauty of Toronto 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 43.642, -79.381 (LatLng) .…
NOTE - When printing plate #2 ( the blue jay) Pause the print at layer 6 and change filament to blue or a color of your choice.
A remix of the SEAMLESS phone stand from https://www.thingiverse.com/thing:3684236 with Toronto Raptors NBA. Go get the championship, Raptors! Print instructions Category: Mobile Phone
Test to test the ability to print the highest model. This model was created for ender 3 v2 neo (250mm) but can be scaled to any dimensions. Test if no layershift or any blocades in specific heights, and when everything is fine, you have…
Hockey pucks with classic Toronto Maple Leafs logo. Logo protruding, another in engraved style. Side knurled pattern versions also available. Enjoy! Check out other pucks in my collection:…
Hockey pucks of new (technically going back to vintage style) Toronto Maple Leafs logo. Logo protruding, another in engraved style. Side knurled pattern versions also available. Enjoy! Check out other pucks in my collection:…
Logo designed to be 6in (152.4mm) at it's longest points. Model is designed in inches so STL might need to be scaled accordingly. If you want to print multi colour, each colour is designed to be 0.8mm thick and is 4 layers on 0.2mm layer…
The Toronto Blue Jays are a Canadian professional baseball team based in Toronto . Founded in 1977, the Blue Jays compete in Major League Baseball (MLB) as a member club of the American League (AL) East Division . Since 1989, the team has…
I printed a coaster designed by MEroy, https://www.printables.com/model/114495-nhl-toronto-maple-leafs-coasterhttps://www.printables.com/model/114495-nhl-toronto-maple-leafs-coaster. I designed this holder to make it easier to store them.
Created this as I could not fine one already in play. Please like and download
The large building located at Yonge and Gerrard Northwest Corner, featuring an IKEA, condos, and more! Model acquired using Toronto's 3D massing tiles, and a lot of cleanup! interiors are not modeled, may be minor issues with printing but…
The block surrounding Toronto's City Hall buildings and the NPS Skating Rink. Pulled from Toronto's 3D massing archive use tree supports and feel free to manipulate the model as you wish for a successful print. I tried my best to simplify…
This is a scale model of downtown Toronto, Ontario, Canada, designed from LIDAR data. It covers a square 1.9km / 1.2mi / 6250' on a side. When printed in mm, it is 5 inches (12.7cm) at 1:15000 scale. City models looks best when printed…
3D printable topographic miniature of Toronto, Financial District - 🇨🇦 Canada Capture the beauty of Toronto, Financial District 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo…
Toronto Sceptres PWHL team golf ball marker (25mm diameter by 2mm height and a 10mm spike). Version available is embossed for SLA and single filament printer. Usage Place on the green to mark your golf balls location when it is in the…
This is my first big model, and I think it turned out pretty good. Assembly is simple, the top of the CN Tower prints separately and you just need to snap it on but the city part is all one piece. I printed at .02 millimeters with a 0.4…
3D printable topographic miniature of Toronto | Skydome and CN Tower - 🇨🇦 Canada Capture the beauty of Toronto | Skydome and CN Tower 's city landscape with this topographic miniature! This 3D model represents the geographic area around…
I designed this hype chain to showcase this awesome alternate logo. This was designed for a single color printer, using pauses and manual filament changes. No support needed The filament color sequence is as follows: Start with red @…
The major building campus of Rogers OMP Headquarters near Jarvis and Bloor in Downtown Toronto. I have made the building manifold and included the bridge across Jarvis St. to the north building as well. Building sourced from Toronto's 3D…
This is a 1:500 scale model of the 2025 Roger's Centre, or the home stadium of the Toronto Blue Jays. The walls were scaled down 1:500, but then the height was put on 6x afterwards so it was more visible. DISCLAIMER: This is a fan-made,…
A simplified 3D Model of Union Station in Toronto, Canada I've noticed on occasion the left block of union will get one or two raised layers, I recommend just using a negative volume on it. if thats something you'd be bothered by. I did…
Made a model for someone and decided id share for others to use if wanted. Prints for me in 1 hour on Prusa mini with 100% infill and 3 colours.
A 3D Model of the new CONCORD SKY building being constructed at Yonge and Gerrard based off architectural drawings. Pulled from the City of Toronto 3D Massing archive.
A replacement pin / plug for the hinges of a municipal recycling / garbage / green bin. Designed to match city of Toronto's: - 20mm shaft - 30mm cap - slightly shorter then the existing to save plastic (still works) Printed cap side down…
I made this 3D model because I went to Centre Island in the Toronto Islands with this ferry today
Toronto Maple Leafs door topper, or corner. for the right side of the door. It's in colour. I print it in 10% infill to keep it light since it's above a door.
Will the Toronto Raptors be golden and win the NBA Championship tonight? Let's find out in a few hours! Go Raptors! The 6ix in 6ix!! We the North!!! Print instructions Unassociated tags: fan art, We the North Category: Signs & Logos
I wanted a Maple Leafs coaster, but I didn't want an MMU design. This changes colour by layer in your slicer instead, so us commoners have a good looking design. I also edited the logo so it looks extremely clean when printed. Enjoy!
About I've always loved Toronto's tallest free standing structure and was looking for something to practice my Fusion 360 skills with so I designed this to-scale architectural model of the CN Tower. The entire model was designed and split…
🇨🇦 Welcome to Canada Bienvenue au Canada! This model was designed by Dany Sánchez . The CN Tower (French: Tour CN ) is a 553.3 meter-high (1,815.3 ft) concrete communications and observation tower in downtown Toronto, Ontario, Canada.…
Toronto Maple Leafs Keychain, Will 2023 be the year they make it out of the first round??? Printed on an Ender 3 S1 Pro with Sonic pad running the normal profile for Ultimaker Cura
I built this phone stand out of the three Teams’ logos. The prop and base were made of baseball bats and hockey sticks. Everything should fit and stay put, but I glued mine together anyway. I printed it with 2 colour changes. The prop and…
A 100 mm coaster for the University of Toronto. I printed on a Bambu P1P with white PLA for the background, blue PLA for the text, and red PLA for the maple leaf.
Inspired by the Toronto Maple Leafs retired number banners hanging from the rafters, I recreated these banners to look like the back of a jersey with each legend's name and number displayed. Display your Maple Leafs pride in your office,…
Toronto Blue Jays Logo Model is set as a whole or can be printed in sections if wanting to change filament colours. V2. Re-created with Fusion360, changed layout and printing technique. V1. Created with TinkerCAD Please post a make if you…
STL and Gcode of 4 low profile square raptors coasters. Gcode sliced for a colour switch to make it two colours for a Mk3s+. Please like, Print and enjoy!
Pulling from GIS data and open-source geospatial mapping data, I managed to create this 3D Model of 10 Dundas East, known as the Tenor or the Yonge-Dundas Square building. it is home to a movie theater, a Jack Astor's, a full food court,…
Toronto Maple Leafs bottle opener to make game day a little more fun. Use prusa slicer to filament change to get the multicolor happening as shown in the picture! Enjoy
Parameters tested with 0.4mm nozzle 0.2mm layer height 15% infill 3 top layers Ironing on all top layers For multi material prints Each part is labelled with the color to be used. Add all the files to your project at the same time and…
using Touchmapper.org, a tactile map creator tool for vision disabilities, I created this grid of 3x3 maps of the Dundas and Church area, around TMU. I haven't finished printing this yet, but I printed the models in a variety of colours.…
Toronto Blue Jays Lightbox Please "Like", review, follow and upload make. I spend a lot of time designing and allow it all to be used for free (including commercially). If you'd like to help me out, below are the possible ways. Thank you…
Another NHL coaster this one for the Toronto Maple leafs. Import as a project. It prints face down. Ring on the print for a cork bottom if you wish.
A MMU coaster. Printed face down, Cork adhesive bottom added. Open as project.
Toronto Maple Leafs logo created with HueForge. You do NOT need a multicolor printer for this. Everything is done with filament swaps at set layers. Follow my profile for more team logos as I will continue adding more. Print at 100%…
The Toronto Raptors NBA basketball team golf ball stencil insert provides a fun marker friendly logo that stands out on any golf ball that works with the PrintSphere Golf Ball Stencil Holder ( hinged or unhinged ) or the Golf Ball Spray…
Celebrate the beauty of Toronto's skyline with our CN Tower-inspired home decor piece. This 3D printable design captures the essence of Canada's iconic landmark, adding a touch of urban sophistication to any space. Whether you're a proud…
Toronto Maple Leafs coaster sized 11cm x 2mm. Perfect for printing with a multi-color system like the Bambu AMS (included .3MF build plate). The main coaster is 2mm, but I raised all of the colored sections by 0.05mm just to allow easy…
The Toronto Blue Jays (MLB) baseball team golf ball stencil insert provides a fun marker friendly logo that stands out on any golf ball that works with the PrintSphere Golf Ball Stencil Holder ( hinged or unhinged ) or the Golf Ball Spray…
4 color multi part print of toronto blue jays logo. gave some of these out on a recent trip to cuba. they were a hit. Print instructions printed at 0.2mm layer height in pla.
A representation of the Toronto Union Station Shed in N-scale (1:160), to span pairs of tracks in a station yard. These were designed to print as one piece, and sized for an Elegoo Saturn 8K printer. I'm sure it'll work on most printers…
This is a really fun Toronto Maple Leafs hockey puck that you can display in your home or even play hockey with! Print Settings Rafts: No Supports: Yes **Resolution:** any Infill: 20-40% **Filament:** any pla/any black and blue Category:…
Exciting news! working progress design for Toronto Pearson ATC tower. We should add more details in time. Stay tuned!
3D model of Downtown Toronto. Recommend for best quality: Layer height: 0.12 Infill: 10% No support needed
