Counting matching models…
Trackpoint cap for Lenovo thinkpad keyboard. There are two types, a bulging one and a dented one. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: SainSmart TPU Clear…
This is the 3.0mm variant of the Lenovo Thinkpad Trackpoint cap. I printed it in TPU. It's a bit messy (being small format TPU) and probably would have printer cleaner on a 0.20mm nozzle, but the end result works GREAT on my Lenovo P1 Gen…
This is a replacement cap for Dell Latitude E7440 stick pointer.
Since the feet of this Lenovo keyboard are very likely to break, I designed a new version for it that has a decent material thickness and printed it out of transparent PETG (very stable) with 100% infill. There are 3 Versions: - original…
This model is a heart-shaped replacement for the TrackPoint on Lenovo ThinkPads for modern ThinkPads. Ideally this print is printed with foaming TPU as this provides the best grip and doesn't risk damaging the screen when closed, but of…
FN Key Blocker // Lenovo ThinkPad
This is a remix of a beautiful and thoughtful model by CodeNameX from Thingiverse. I tweaked 3 things: Steeper angle for the device - it'll now face towards you Easily accommodate thicker devices Shorter back support to avoid collision…
WTF? Simple Gadget Stand for the Lenovo ThinkPad TrackPoint Keyboard II. Category: Mobile Phone
I added a trackpoint to a corne-cherry (crkbd) keyboard for ergonomic pointing bliss. The trackpoint is mounted in the middle of the YUHJ keys for easy access from the home row. Luckily, the corne-cherry PCB has a mounting hole at this…
Probably compatible with other Thinkpad models
This is a replacement trackpoint for the Sony PS3 bluetooth keyboard CECH-ZKB1. Two sizes available: 5mm and 6mm diameter (picture shows 6mm diameter version). Category: Electronics
Just a little replacement pad for the TrackPoint or for those who aren't sure, It is a small square stick usually placed between the G, H and B Keys on your keyboard. This cap is designed to fit very well EASY TO PRINT Uses less then 5…
This is a replacement part for the Lenovo Thinkpad TrackPoint Keyboard (KC‑1957/KU‑1255). The model stays faithful to the original design, with slight dimensional adjustments made for 3D printing. The model was originally created by a…
The problem with the Surface Pro and other tablet based 2 in 1 PCs is that they aren't very nice to use in your lap. The rear kickstand/wobbly keyboard attachment etc make it unstable except on large hard surfaces. Microsofts absolutely…
Trackpoint extension 0.2mm layer height inside: 2.677 x 2.677mm
This is a palm rest for Lenovo Trackpoint Keyboard (1st gen). By moving the slider, you can adjust the angle of the keyboard. The holes on the front and back of the keyboard hold it in place, so you can lift it up while it's attached. The…
On my Dell 7450 the keyboard was faulty, ordered a new one. Now the original, with the extra buttons was £45, without the buttons (slightly different model) £15. Since I never used that, I printed a cover and saved £30. I used Galaxy…
This is a replacement part for the Lenovo Thinkpad TrackPoint Keyboard (KC‑1957/KU‑1255). The model extends the original by approximately 5 mm and is dimensionally adjusted for users who prefer a slightly angled setup. The model was…
Note : A more-refined version of this case is available at this Thingiverse page . I wanted to build a programmable mechanical keyboard without an unfamiliar layout requiring me to re-learn how to type all over again. There are a few…
This adds a standard mouse button switch to the trackpoint shield from Holykeebs. It is still an early prototype, and the right hand corner doesn't click as well as the left hand corner, but it works. I used a thick (1.25mm) paperclip to…
I lost the earser that is placed on the back of Zebra MP. This meant my replacement leads would fall from inside. Made a quick and easy stopper that looks like Thinkpad Trackpoint.
Nozzle : 0.2mm Material : PLA The fit was quite tight. Depending on the machine's printing tolerance, it may not be possible to install it. I'll keep the FreeCAD project files zipped up.
I wanted to mod this to make it work better for my device. step file makes is much easier.
Scaled the model to fit the tactile directional switch of the esp32 marauder mini v3, should fit on anything else that uses the same type of switch
I loved this model, but I use the Slim Pen, so I wanted to adapt it to my needs. It works really great. Instead of a minisforum Stylus, I adapted this to work with the Slim Pen from Microsoft. Be sure to check your magnet orientation if…
Minimal trackpoint for yoga x1's. It has teeth for better registration against fingers.
This model is a heart-shaped replacement for the TrackPoint on Lenovo ThinkPads for modern ThinkPads. Ideally this print is printed with foaming TPU as this provides the best grip and doesn't risk damaging the screen when closed, but of…
Nozzle : 0.2mm Material : PLA The fit was quite tight. Depending on the machine's printing tolerance, it may not be possible to install it. I'll keep the FreeCAD project files zipped up.
I loved this model, but I use the Slim Pen, so I wanted to adapt it to my needs. It works really great. Instead of a minisforum Stylus, I adapted this to work with the Slim Pen from Microsoft. Be sure to check your magnet orientation if…
