Counting matching models…
This project has wasted 20+ hours of my life. So please enjoy it and fix any issues you come across. Also feel free to improve and modify this design however. (Side note, this kit gives the exact same angle or a couple degrees more than…
Only included a step file with the designs, so its easier to modify if needed. I know the side panels dont line up perfectly with the fenders, because they were designed separately and I put them together in one file. They should fit…
Versteifungsplatte für Tamiya TT02 Top Deck for Tamiya TT02
Inspired by this remix, I made some mudguards from scratch making sure there is absolutely no rubbing. My tt02 has various suspension modifications to improve suspension travel, I needed more clearance than normal. (It should work with…
This bolts on over the front end of the steering rack on the TT02 and takes out some of the side to side slop. The stock screws you remove to fit this are too short, you'll need ones somewhere around 15-16mm. When I finished my TT02 build…
Rear Diff Locker to suit Tamiya TT02 if you want to use to drifting. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Yes Resolution: 0.1 Infill: 90 Filament: Generic PLA Post-Printing Instructions…
Tamiya TT02 TPU Bumper that fits Bitty Design Hyper-HR body. Printed in 95A shore TPU. Category: R/C Vehicles
Hello everyone, I redesigned the lower rear suspension arm for the Tamiya TT02. For a other projekt I needed them to be slightly longer so I made the model in SW configurable. The models I've added are the originel length and +1,5mm. If…
This is a front splitter for the Tamiya TT02 Audi V8 RC car kit. This part has been designed to install into the existing lower bumper holes with two M3x20 machine screws, however M3x15 will also work without issue. Printed out of PLA or…
The holder for my body on my TT02 chassis wobbled a bit when driving. To fix this problem, I designed a stiffener. The brackets wobble less and the body sits better on the chassis. The distance between the two holes is 67mm. The diameter…
Clip-on exhaust for Tamiya TT 02 model cars. best in TPU printing for longevity.
Recommend to print with .12 layer height and a .4 nozzle or smaller, I did 6 layers top and bottom and 6 walls, with 35% cubic infill. PLA works, but nylon would be ideal. Be sure to run slow at the start and use some oil or grease. The…
The original holder presses very the cables of a 2S lipo pack. In the long run, the cable is injured. To get around this problem, I designed a new holder that offers more space for the battery cable. Since it was a good idea to add a…
Body for Tamiya TT02 chassis, which can be equipped with an additional underbody. The model may need to be split during slicing. Better pictures to follow!!!!!! Printing settings: Better Pictures will followngs: Nozzle: 0.4mm Filament:…
A pad for the transponder to sit on that is forward but in a safe spot. You can use the stock screw or get 2mm longer screws.
Kann sehr schnell gedruckt werden und dann einfach zusammengeklebt mit ein paar Tropfen Kleber. Kann unten passend in die Wanne "eingeklipst" werden und steht damit bombenfest. Print Settings Printer Brand: Sovol 3D Printer: Sovol SV06…
I changed the battery of my TT02B and the holder didn't fit with the new lipo battery. So i designed a new one. I added a vesion with an a buzzer support (battery tester) so it will buzz when the tension si too low. Print Settings Printer…
this is my (bad) ripoff of the mrc (matrix racing club) tt02 steering mod. all you need to build is this 3d printed steering, a threaded rod kit, and stronger springs, (are links at bottom) as well as the part that come on your tt02. when…
smaller spur gear for bigger pinion gear
Tamiya tt02 battery holder with Go pro mount
Front Suspension and Steering System Modification fot TT02 Please replicate the parts by mirroring them, and then print them. and you will need 8x5x2.5 bearings, 5x2x3 bearings, 6x3x2.5 bearings, M2 screws, and M2 set screws.
Tamiya TT02 Body shell mounts, I got fed up with the wobbly originals and didnt fancy buying metal ones that will get abuse and likely bent, so designed some that can just reprint when they get broken Required 4x 8mm Countersunk posi head…
shock towers to fit 62mm oil filled shocks on a Tamiya TT02; with this and others mods got a good rally ground clearance. printed in pla+
I have designed a replacement steering link for the Tamiya TT02 model 42mm length 33.5mm BCD Printed mine in CF Nylon so they last 255'c 75'c 25mm 0.3 100% infill 45 mins in CFN they may need a M3 bolt put into them fully and snapped out…
Custom prop shaft adapter for making a custom carbon fiber driveshaft for the TT02/TT02B models. Items needed: Carbon Fiber Tube (McMaster Item# 5287T79) - 0.25 inch ID, .378 inch OD. Epoxy, recommend Urethane based epoxy like JB Weld…
Big thanks to the originators i remixed from! I trimmed down the mount post for the front shocks on the tower and the front arms 2-3 mms to move them backwards a little and allow the body not to rub on them, otherwise there are no changes…
Shorty LIPO Battery Tray for Tamiya TT02 This allows you to adapt the shorty 2S LIPO to the Tamiya TT02. - Modeled around the Protek 4800 Shorty 2S Lipo - Hobbywing Stockspec ESC - Minor chassis modification needed (one screw hole)…
This is my design for the TT02 ball bearing bell crank. it uses a common bearing in the crawler space which is the 11x5x4 mm printed in abs or petg Should be printed with all walls, no sparse infill I added the f3d file for resizing of…
This was made for a TT02 with a HPI Nissan 350z bodyshell. It was made sit on the rear bumper of tt02 As you can see from the image can cut the bodyshell higher if you want more visible. This was never optimised or made printer friendly.…
A stiffener to improve the stiffness of the Tamiya TT01 & TT02 rear body holder.
TT02 Receiver Box to place the receiver on top of the servo. Just use the existing holes. it's that easy ; )
A new Centerbrace for a high-motor TT02. Mine is a drifter and needed some new parts to fit my driving style. I used this Center mount; https://cults3d.com/:3706912 . Worked pretty good, printed it in ASA CF, no problems so far
Ein Halter für einen hinter der Hinterachse positionierten ESC für einen Tamiya TT02. Als ESC wurde ein Hobbywing QuicRun 10BL120 G2 ESC. Befestigt wird das ESC mit Doppelseitigem Klebeband. Der Halter wird an der Unterseite an den…
Allows simple and effective attachment of the Reely sound module.
Recommend to print with .12 layer height and a .4 nozzle or smaller, I did 6 layers top and bottom and 6 walls, with 35% cubic infill. PLA works, but nylon would be ideal. Be sure to run slow at the start and use some oil or grease. The…
Shorty LIPO Battery Tray for Tamiya TT02 This allows you to adapt the shorty 2S LIPO to the Tamiya TT02. - Modeled around the Protek 4800 Shorty 2S Lipo - Hobbywing Stockspec ESC - Minor chassis modification needed (one screw hole)…
Clip-on exhaust for Tamiya TT 02 model cars. best in TPU printing for longevity.
My son broke my TT02B's rear wing, so i made a new one ! ^^ Print Settings Rafts: No Supports: Yes Resolution: 0.2 Infill: 20% Category: R/C Vehicles
