Counting matching models…
Hello everyone I would like to suggest some modifications to the excellent work of Rocco's Stuff Mini Vault. I enlarged the trunk to make it deeper. I added a shelf and a tunnel to use it as a piggy bank. I also prepared all the 3MF and…
For the lady that likes a lil extra..approx 250mm long,69.5mm at its thickest.Please feel free to rate and review.
My brother needed extra dividers for his drawers. I modeled them up for him and thought I'd post on the off chance anyone needed the same. The drawer units were sold in Menards up to a couple years ago. Second image shows the printed…
Wanted a Hook to hang my empty backpack on at work. Didn't want to put a hole in the wall. Thought I'd try to use 3M command strips. Wasn't sure if it would be strong enough, but so far, so good.
Designed to interface the camera mount that comes with the CADDX Ratel 2 with the base plate of the Fossils Stuff Revo 5 frame. You will need: 2x M2 x 4mm heat-set insert 1x M3 x 4mm heat-set insert 2x M2 screw 1x M3 screw
Basic Key-Chain That You Can Hang On Your Walls, In The Halls, Or On Your Bal- (Based Off Of The PhoenixDoesStuff YT Channel.)
Some stuff I have to put on the plates must be hold by something. The holder will help lock them into place. You WILL need to print your own locking tool that will go into the holder, obviously, since your needs will probably be very…
Let your phone or stuff relax :) Printing Printed in PETG / 0.3 layer height PLA should work too (mat part needs proper bed adhesion) Print parts in given orientation Don't use supports or brim Assembly Also check out the corresponding…
PG29 threaded blind stuffing to close unused PG29-openings in housings. Adapter for 1xPG9 cable gland for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. [1] Thread types: PG thread…
PG42 threaded blind stuffing to close unused PG42-openings in housings. Adapter for (1-5)xPG9 cable glands for smaller diameter wires. Unused PG9-openings can be closed with PG9 blind stuffing with PG9-thread. As there is very little…
description Those are holders for HSW. They are lattice-aligned, meaning that they use the distances between HSW's hexagon centers as width and height. Therefore, there is no distance, or regular distance, between each holder. This is…
This is a tuff box used to store items. The container is water proof. Inside dimensions are 139mm x 74mm x 25mm. All parts printed with PCTG except Seal which is TPU 95A. Seal is tapered, install the larger width down into the bottom.…
This is a magnetic gift box for all your valentines day needs! Comes with 19 lid options! You can use it for jewelry or chocolate or any other such things! Takes 12 6x3 magnets (link at the bottom). Super glue them in for best results.…
When it asks to scale to millimetres say No in orca slicer When it asks to print multiple parts as one click YES It is 40 grams: 10% infill No supports needed
gave myself exactly about 2 hours on this, really proud on how it went judging by how this is my first time using fusion! if youve got some cables and need some (rather interesting) cable holder designs and a 3d printer, this may or may…
The applicator tips are perfect for use in those tough to reach areas
A simple hook for bottles & other stuff for your basement. PLA Comfortably holds 1kg. I have a 30x30mm aluminum profile in my basement from which I now can hang stuff. Print with PLA/PETG 3 walls, 20% gyroid infill, tree supports.
I am moving board game miniatures onto shelves and so am consolidating each game and all of its expansions into a single box. To do this, I've created this generic box insert system, BITS, the Box Insert for Tokens and Stuff! This BITS is…
Here are the core BITS Components for board games with 284mm boxes, such as Steamforged Games's Horizon: Zero Dawn series! Below is the same text as I used for the 315mm boxes, so if you've already read that, feel free to stop here ;) The…
Designed for stuffing 22 mm sausage casings. Compatible with most generic/manual sausage stuffers (AliExpress type). Reinforced cone design to prevent cracking at the weakest point. Printed with 100% infill for strength. Recommended print…
A small rack for light weight stuff like rolls of tape. Don't try it with anything heavy. Thanks to David D for the OpenGrid system I used PLA, it needed 48 grams, and took about one and a half hours to print on a BBL A1
NC State Tuffy Mascot bust sculpture. The basic model was AI generated. Lots of manual corrections and color additions. Printed at 350mm on a 5 head XL. Set up for white on 2, black on 3, silver on 4 and red on 5. Long print and requires…
when ever u are watching a scary shark movie print this model
Here are some random stuff that I created just for the sake of learning! 1. Infinity cube: I always wanted to learn how the infinity cube is modelled. So, I started to model it from references available online and here we are! Printing…
This is simple cup I designed to hold my toothbrush. You could use it to hold lots of stuff. It is a very basic cup. I printed in Overture Matte Gray PLA with all default print options. Printed in about 1:50 on a MK4S.
random stuff stick caps for my rc plane and stuff to fix my prop launcher
Hey there! Check out my website to see the latest products I've designed—now available for you! Don't miss out, hit the link and explore what's new! My Shop: https://buymeacoffee.com/cc3dprojects/extras My Website:…
A pen box I made as one of my very first projects for my workshop. Just throw your pencils in it (to what else....) Should be printable without supports. If you feel fancy, I added the letters, so you can print them in an accent color and…
THIS IS UNTESTED - PRINT AT YOUR OWN RISK (but please provide feedback if you do). Version 2.4 (2/20/2025) small update to fix incorrect plate descriptions in the 3mf profile. The current profile is…
These are the latest version (v 2.0) of my lidded Gridfiniy bins, with several improvements over the 1st version. These include the following improvements and new elements: Fully redesigned bins with a more efficient use of material…
These are the latest version (v 2.2) of my lidded Gridfiniy bins, with several improvements over the 1st version. These include the following improvements and new elements: Fully redesigned bins with a more efficient use of material…
These are the latest version (v 2.2) of my lidded Gridfiniy bins, with several improvements over the 1st version. These include the following improvements and new elements: Fully redesigned bins with a more efficient use of material…
These are the latest version (v 2.2) of my lidded Gridfiniy bins, with several improvements over the 1st version. These include the following improvements and new elements: Fully redesigned bins with a more efficient use of material…
This is a Zen Vaporizer Capsule Magazine funnel and stuffer. With this tool you can fill all 5 capsules of the magazine at ones. There is also a funnel for a single capsule and a small stuffer tool. Print Option: Bambu Lab PLA 15% Infill…
I purchased a premade Common mode choke from Radio Stuff so created a case to protect it from damage when in my rucksack. The case required cut outs to accomodate the coax. The lid then clamps down on the coax to lock in place. These…
To be used over grid 50x50mm variants with my tools description and empty box modifiable in slicer
Layer height should be at least 0,15 mm or less. The example in the pictures is printed with a 0,08 mm layer height.
If you own the Super Action Stuff Ultimate Weapons Rack available here: https://a.co/d/6nbEmnT These minimalist pegs allow you to stand and display your figures on the pegboard side of the rack. No more large figure stands taking up…
This is a customizable insert for the MINI Box For Stuff v1.3 (fits A1 MINI / Prusa Mini size printers). These models are blank, and REQUIRE customization. This is being posted so that folks can customize the insert modules for the MINI…
TINY TUBS Tiny tubs for Tiny Stuff! A set of tubs, wall mountable or free standing. Each tub slides easily in and out of the holder and has a clip on lid, the standard tub is 40mm x 40mm x 40mm and the Taller tub is 40mm x 40mm x 85mm.…
I've been on an organizing kick lately in my kitchen, and I ran across an under-shelf cling-wrap box holder. But, I didn't much care for it. It printed tall--very tall-- so it takes a bit longer, since printing along the z-axis is slower…
This mount is designed to be adapted to lots of different things, so I have included the F3D file, AND STEPs. It's original use is for this antenna: https://a.co/d/g9km0ca I used ¼" carriage bolts for the antenna mount and 5/32 bolts for…
Attention: I keep seeing people selling my models on Esty and eBay: Digital files and actual prints. PLEASE STOP THAT! I have already gone after a few of them and got them banned. I will pull these off here if this keeps happening. I put…
Print this stand for order your working place. I use FNIRSI HS-01 soldering iron and additional stuff. Print Settings Printer Brand: Creality Printer: Ender-3 V3 SE **Rafts:** No Supports: No **Infill:** 10 Filament: Noname PETG Black…
The shapes are fully compatible with gridfinity. When it comes to magnets and screws I changed two things: - I used TAPERED M3x5mm screws. They are shorter and the holes are self-supported. - I used 6x1mm magnets, the are twice cheaper…
I designed these to do a workshop re wire that required the use of plastic back boxes along a benched workspaces. A lot of back boxes of this type do not have 20mm knock outs in them and as I also like to use 20 mm nut and flange fittings…
I printed with my Ender 3 The print settings is: No support 0.2 layerheight and the text looks downű Thank you for looking at this model!
I liked the hook from my shower rail holder https://www.thingiverse.com/thing:3650248 so I made some more holders in order to store shampoo, liquid soap and similar stuff at the rail. I will add more stuff in some moment. I suggest to use…
I found the boxes that come with the filament to be very useful to organize my workshop. I have a box for AC electrical, a box for DC electrical. Arduino, Acrylic painting, Silicon tooling, Epoxy tooling, sewing, etc. I like the boxes…
I was making the vault, and when I went to buy the dowel pins, I decided to just design them myself, and thought others might want to as well. So here they are. The Link to the Original vault by Rocco's stuff is here:…
Snake: https://www.printables.com/model/1054719-oh-its-a-snake-mrweebl-weebls-stuff-badger-badger Mushroom: https://www.printables.com/model/1208960-mushroom-mushroom-mrweebl-weebls-stuff
Badger: https://www.printables.com/model/1054537-badger-badger-badger-mrweebl-weebls-stuff Mushroom: https://www.printables.com/model/1208960-mushroom-mushroom-mrweebl-weebls-stuff
Bored of static Gridfinity bin that are anything but dynamic ? Try this turning holder if you want it more ludic. Here it is. The 2x2 GridFinity - Rotative Zip Ties And Stuff Holder Bring back the fun in the workshop. Be the party of the…
28mm Weight lifting bar plug. 57mm to train your grip. works well. 15% infill 2 walls 0.2mm is tough enough to lift 60kg(I haven't check more weight) thanks. Category: Sport & Outdoors
simple hook for ikeas tuffing bed, no supports, snaps in place, easy to remove and snap in place.
3 part print easy to print with some supports .(paint on supports)
We have so much fun playing tic tac toe in our house, that we decided to make a board for every season. For the holiday season this year, we are playing with candy canes! Print 5x Xs and 5x Hearts. One board. Utilize filament changes to…
The hexagonal holders are separated into 4 parts that need to be glued: top, middletop, middle bottom and bottom. The stand is also separated into 2 parts, left and right side that once glued just need to be pushed into the hexagons.
I had trouble getting enough force on my Hakka sausage stuffer handle to stuff 17mm snack stick casings through a 10mm tube, so I made this adapter to allow a longer handle (in my case a ratchet handle) to be attached to the stuffer to…
For all awesome photos, makes, reviews and more visit original source links. DaveMakesStuff description on thangs.com: “Hey, if you’re in the neighbourhood drop by for a… CUP OF TEETH!!!! WHOA HA HA HA!” Teeth cup and saucer are linked in…
Hey everyone! Today I bring you a nice little display shelf. It prints fairly fast and easy. It has a clearance of about 70mm between shelves but if the things you are putting on it are small it can still fit a lot, giving you more room…
Custom keys based off the pins in the original model. The key names indicate the lock lever order. The original key is 321 stacking the lock levers from the top 3 to the bottom 1. Note that the keys with duplicate numbers will require you…
Initially the box was designed to sort out resistors, but I decided to make it parametric, so you can modify it easily to store any kinds of little things. The default size has 10 sections, each section can store 20 resistors. 3 boxes are…
For the lady that likes a lil extra..approx 250mm long,69.5mm at its thickest.Please feel free to rate and review.
Habe mir zu meinem neuen Nanoxia Deep Silent A-RPG Gehäuse ein paar dinge Gedruckt die das Leben schöner machen. Headsethalter: Einfach zu Drucken mit leichtem Support im unteren Bereich, siehe Bild, kann einfach in die vorderen…
My brother needed extra dividers for his drawers. I modeled them up for him and thought I'd post on the off chance anyone needed the same. The drawer units were sold in Menards up to a couple years ago. Second image shows the printed…
Stick hook for getting stuff from under the sofa. A hook that you attach to a stick. It helps get stuff from under the sofa. Printing: I printed it from PLA. I used 3 perimeters and 20% infill but you can try less. Don't use supports.…
I wanted to use a female - female duttek 90 deg connector as I'll have an extra from the gopro P2 Pro case.
this id for this box https://www.thingiverse.com/thing:4908289/files 100% infill add suports Category: DIY
Needed a hanger to hold the heat gun without storing it away. it uses the bolt holes for the handle on the right side.
A motor mount for the Fossils Stuff Revo 5 frame to enable mounting of motors that have 16mm centre-to-centre mounting holes. I printed mine vertically (as pictured) and they have been holding up well so far. You will need M3 x 4mm…
Inspired by classic tufted designs, these dice feature patterns and textures that add a touch of elegance to your gaming setup. Perfect for board games, role-playing games, or as decorative pieces, the Tufted Dice is versatile and…
Mechanic Parts Tray 145x170x15mm - Mechanic Stuff It is ideal for storing small parts or screws, for garage, maintenance, or DIY Overall dimensions: 145x170x15mm The model may be imported as a single assembly or grouped object. Before…
The ESC Mounts I made and the sliding battery tray I modified to work for my application. The esc mount is for a SonicWake 36 V2. You will use it as a template to use to cut a 2mm thick carbon fiber plate and then mount it to your boat…
Towel holder for holding towels or other stuff to the wall or cabinets. place two strips of double sided tape to the back and enjoy your towel holder in the bathroom, kitchen or toilet! Can even hang scheur calendars!
Mini bedside storage box for your smartphone and other stuff. I added a hole on the floor to put your charging cable through, when not used you can put it in the small slid at the side to prevent it from sliding out. I included several…
