Counting matching models…
My design is only the gold colored fan duct modification. Created from scratch using Blender Orange and red pieces are teookie's design which can be found here .
Printing instructions First layer: 0.2mm Other layers: 0.15mm Optional color change at: 0.8mm (layer 5) Detailed explanation of why and how this was designed: https://uwyn.com/tactile-patch-sheets
Changelog: Added Polymaker Polylite ASA (4/20/23) Fixed the Polymaker ASA profile (4/21/23). I had uploaded the wrong one! Correct one is now uploaded as Polymaker_Grey_ASA_fixed.3mf (4/30/23): Fixed the ASA profile to have the filament…
Change log: Added a PA-tuned profile for Bambu's PETG-CF (4/19/23). I usually use the Bambu presets.. but I was/am struggling with this filament. I do not recommend it. Added Overture Army Green PETG (4/20/23) Added California Filaments…
Changelog: 4/25/23: Added Overture High Speed Clear TPU. This one can print as fast as 10 mm^3/sec. Do not confuse this with regular Overture TPU! Did extensive tuning on this to reduce stringing and maintain best possible quality. Added…
This is an optimized version of the "Mechanical Planetarium" model by Zippitybamba. His original model is on Thingiverse here: https://www.thingiverse.com/thing:4613061 I printed a few parts of the original model on my Prusa I3 MK3S, and…
Changelog: (7 /18/23): Added Prusament Marble Grey PLA (5/20/23): updated / retuned Prusament Galaxy Black PLA. Improved PA value. (5/16/23): updated Sunlu_White_PLA+ and Sunlu_Grey_PLA+ with better PA values, min layer times, and retract…
What this is: This is a collection of all of my PA/Nylon and similar (PACF) filament profiles for all filaments I've used of this type. I will update it as I tune new filament brands and colors. They are generally tuned for flow rate ,…
This project uses low temps, high extractions, slow speeds, and several other tweaks to remove oozing and major defects with this specific TPU filament. Make sure to have your tensioner screw as loose as possible and use a 0.4mm nozzle.…
Changelog: Added Polymaker Polymax PC (4/23/23). Note that default elephant foot compensation may be insufficient for this filament and you may need to increase it in your slicer profile. Alternatively, you can change the Z-offset for…
01/12/23, Added Updated .3mf. Bambu Studio settings tuned for eSUN PLA+ After loading the .3mf there is setting changes in all 3 sections which interact to produce the end result. If you just use the comparison charts to make your own…
Showcase personalized automotive style with this 3D printable STL model of a Customized Mazda Miata MX-5. This tuned sports car model is perfect for automotive enthusiasts and personalization fans looking to display their passion for…
SKaranko has made nice cherry stone removal tool. Though, I noticed a bit room tune-up the design. 1) The rounded end, friendlier for you palm 2) Thump plate 3) Hammer head a bit longer and tilted more in 4) Position slots for the hammer…
Important note: This collection is for brass CHT-Style nozzle (0.4 mm) with the Bambu printers.. NOT the stock ones. These CHT-style nozzles allow for higher flow/faster printing than the stock hotend is able to achieve. If you want one,…
Important note: This collection is for brass CHT-Style nozzle (0.4 mm) with the Bambu printers.. NOT the stock ones. These CHT-style nozzles allow for higher flow/faster printing than the stock hotend is able to achieve. If you want one,…
Important note: This collection is for brass CHT-Style nozzle (0.4 mm) with the Bambu printers.. NOT the stock ones. These CHT-style nozzles allow for higher flow/faster printing than the stock hotend is able to achieve. If you want one,…
Important note: This collection is for brass CHT-Style nozzle (0.4 mm) with the Bambu printers.. NOT the stock ones. These CHT-style nozzles allow for higher flow/faster printing than the stock hotend is able to achieve. If you want one,…
Original model: https://www.printables.com/de/model/577942-simple-indoor-glider-v2 Same print settings and same Instructions :-)
SV07 Profiles and calibration guide. Black Friday is coming up, and the SV07 is the printer recommendation for those that can't afford a MK4 (yet!). With Klipper and a volcano hotend, it can print much faster than other bed-slingers at…
Here's a fancy set of 4010 tool heads based off the updated CFD-tuned air ducts! This model adds an Ender NG logo cutout over the fan as a fancy grill. I also fixed the stringy bridges in the lower vent by reshaping the duct (see…
Important note: This collection is for brass CHT-Style nozzle (0.4 mm) with the Bambu printers.. NOT the stock ones. These CHT-style nozzles allow for higher flow/faster printing than the stock hotend is able to achieve. If you want one,…
These tuned .3mf files are designed to help you get the absolute best print quality with Numakers filaments — right out of the box. 🧠 What’s Inside : Each folder includes a pre-sliced .3mf file built for a specific printer series, using…
Manual multimaterial project specially fine tuned for MK4 and MK4 only. Before finding the proper settings, I experienced bubbling, over extrusion and jammed filament. I am now having a clean wipe tower and nice multi-colour parts. You…
Why and what for. AS-IS this model would turn out boring and flimsy, so I've printed using 4 colors. Plus TPU for tires. Tested different pin sizes on different parts to make everything nice and tight but not too tight. Other then colors…
Basically based on the original motor holder but with 1 mm gap and minimum contact surface for reducing vibration, transferred to the printer’s frame. Needed fasteners (all from your spear parts bag): 2xM3x12 mm screws 1xM3 square nut…
this has a lot of peoples works, i will list them below. https://www.makeronline.com/en/model/Version%202%20of%20optimized%200.4mm%20Profiles%20for%20Kobra%20S1%20-%20Faster,%20Smoother,%20Quieter!/167680.html?trackModuleType=6…
TLDR: This mod provides better frontal filament exit for the autorewinder system EDIT: 26/03/2025 - Added the SLIM version of the F1 and F2 beams with *5 exits I remix the original F1 and F2 beams adding *5 PC4-M10 holes aligned with the…
Here's a fancy set of 4020 tool heads based off the updated CFD-tuned air ducts! This model adds an Ender NG logo cutout over the fan as a fancy grill. I also fixed the stringy bridges in the lower vent by reshaping the duct (see…
Know Rook 180? I've seen couple of points on the original rook 180 that could have been modified to get even more of the printer but later I saw the video about updating and creating MK1 version so I decided to stop as there should be a…
This is where you see the Conclave’s true, cold pragmatism. They took a Shard-Bound Mauler - a beast that’s pure, territorial fury - and bolted a brass & crystal harness directly into its nervous system. It’s a crude instrument, a bruiser…
This is a cover for the exposed portion just behind the front wheel/mudguard. It is to improve on the 3d printed part provided by CAtuned with the rocksliders kit. It uses 2 of the factory bolts in the wheel well and provides an anchor…
Changes to original: Outer walls width 1.6 mm for 0.4 mm nozzle print Inner wall width 0.8 mm for 0.4 mm nozzle print Solid outer walls Shortened ~5 mm to fit better into Eldricht Horror box Wall width is done inwards in order not to mess…
An eight-note pan flute tuned to a C major scale, C to C: hold it to your lower lip and blow gently across the tops of the pipes. Each pipe is closed at the far end and cut to length for its note, with the note letter on the band. A fun…
High-SPL Custom 3D Printed Speaker (DSP Tuned) This is a custom-engineered, fully functional acoustic enclosure designed specifically for High-SPL (Sound Pressure Level) output and deep bass extension. With an internal net volume…
Retrofitting a replacement LCD in the Battle Gear 4 cabinet is challenging since all access is from the front, with no rear access available. This mounting system consists of two parts: the cabinet-side mount and the monitor-side mount.…
“Clamp” from “Spool Holder for Enclosure” – tuned for ABS printing My changes: Chamfer and fillet to help with warping and elephant's foot. Also reduces material usage since less material is needed to make a strong part when using a…
items needed : 1. hivi m3n 8ohm speakers 2. 52 mm 6ohm silk dome tweeters 3. m3 6mm heat inserts 4. m3 allen screws (15mm and 10mm) 5. yly2088 crossover 6. banana plugs and sockets 7. 2kg pla 8. tpu for gaskets printed on cr10se printing…
Turn a classic benchy-style boat into a high-speed racing machine! 🏎💨 This custom-designed tuned race tugboat features aggressive aerodynamic bodywork, a large rear GT wing, side exhaust pipes, wide fender flares, and an exposed rear…
A Mars Rover I made that is exploring a part of Mars. It has two cameras, on one top and one on the end of a long arm, and nuclear generator on the back to power it. It based off the real thing. Made with Moblo 3D For best results from…
This tuned bass trap is an experiment you can join. Nobody has printed these cells or measured them yet, and everything below is calculated, not measured. The models say that with medium walls (alpha 0.10, assumed) eight cells take the…
Showcase personalized automotive style with this 3D printable STL model of a Customized Mazda Miata MX-5. This tuned sports car model is perfect for automotive enthusiasts and personalization fans looking to display their passion for…
####The orca profile here is fine but the klipper config is not only old but has issues in it. I would love to post an updated klipper config that works on .13 klipper but I have moved to mainline, incorporated eddy-ng, and some other…
“A frog? You're kiddin' me. What's it do, 'tune' itself? Like a lute? Hah! Waste of scraps. I'd have squashed it and checked its guts for shiny bits. 'Coda'... sounds like somethin' you name a pox-sore. My Gulp, at least he finds things.…
i print mostly all nylons on my bambu, vorons, and vzbots. I use ALOT of prusament pccf simply because its a extremely tough carbon filament as well as gives amazing print surface quality. I spent some time to fine tune the profile for my…
Tuned parts for the Strombreaker. Unfortunately I figured out the orginal tolerances only after printing hammerhead 001, 002 and 003 so my printed parts are the original ones. Separate connection pieces also easen up scaling the model as…
