Search results: tupperware

Counting matching models…

Printables

Cap Tupperware Bottle Eco 1L / Bouchon Bouteille Tupperware Eco 1L

Mon 1er modèle avec Fusion 360

Printables

Tupperware Quick Shake REPLACMENT Mixer/Blade

I lost my original mixer/blade for my 500ml Tupperware Quick Shake. Print 3+ perimeters, 100% infill. I recommend printing in PETG ; “food grade” PETG filament is even better.

Order a print of this model

Printables

Cup holder adapter for 1L Tupperware Eco Bottle

1L Tupperware Eco water bottle does not fit in a normal cup holder. My wife uses the water bottle everyday. She also wanted a spot for a couple of pens. This adapter lets the bottle fit and holds 2 pens.

Order a print of this model

Printables

Wheat grass seed starter lid for Target-brand (up&up) tupperware

I had some difficulty 3d printing other designs meant to be water tight. Figured I would just use a pre-made watertight container instead and design a new lid for it. Sadly, I'm pretty sure these containers are now discontinued and…

Order a print of this model

Printables

main gear for tupperware quick chef

[Version francaise] Pièce de renplacement pour tupperware quick chef. Ceci est l'axe portant l'engrenage principal et recevant la poignée. Imprimée avec une imprimante anet A4 (delta) en 3h , épaisseur de couche 0.1mm , support sous…

Order a print of this model

Printables

Tupperware Lid Holder (Wide Base)

Needed a Tupperware (Snapware) Lid Holder with a low base to fit in our cabinets. Cuts down a bit on material and time to print too. Can place double sided tape or rubber feet under the plastic feet to help stop it from sliding on the…

Order a print of this model

Printables

Tupperware Butter Dish

Hi, my wife has a butter dish from Tupperware that is very old and can not be found any more for sale. I've tried new ones that are available but the butter gets pinched and always seems to end up on the outside of the lid and dish. I…

Order a print of this model

Printables

Tupperware Salad Bowl Keychain

Show your love for the iconic Tupperware Salad Bowl with this adorable keychain! This meticulously designed, miniature replica captures all the details of the beloved container. Perfect for Tupperware enthusiasts, collectors, or anyone…

Order a print of this model

Printables

Halter für Tupperware Gewürz Zwerge - Holder for Tupperware Herb box

Small and large fit. Holder with endstop and two screw holes. Can be printed without support.

Order a print of this model

Printables

Tupperware Ventsmart 800ml Keychain

Show off your love for Tupperware with this adorable keychain replica of the iconic Ventsmart 800ml container! This scaled-down model is designed to keep your keys secure and add a touch of Tupperware flair wherever you go. Perfect for:…

Order a print of this model

Printables

TupperWare Rolling Pin Spacer 6mm

Spare Part for the TupperWare Rolling Pin This includes the adapter and the 6mm spacer. Enjoy rolling your dough! BuyMeACoffee Borr3DPrints - https://buymeacoffee.com/borr3dprints

Order a print of this model

Printables

Cap Tupperware Bottle Eco 1L / Bouchon Bouteille Tupperware Eco 1L

Mon 1er modèle avec Fusion 360

Order a print of this model

Printables

Tupperware Pitcher Lid Button

This is a replacement button for Tupperware Pitcher lids. It is specifically designed to fit the lids of the “2qt Classic Pitcher” but may fit others. Confirmed for the 1 Gallon Pitcher as well. Thank you MiCTLaN .

Order a print of this model

Printables

Tupperware Christmas Ornament/Keychain

A festive twist on a classic! This remix of a Christmas ornament/keychain features the iconic Tupperware logo. Perfect for adding a touch of nostalgia and humor to your holiday decor.

Order a print of this model

Printables

Replacement lid for Tupperware Shaker

The original lid is broken, but the shaker is still fine? Print yourself a new lid. I recommend using TPU, I printed this lid with Bambu TPU for AMS with a shore hardness of 68D and it works fine: noozle 0.6mm 0,18 mm layer 3 wall loops…

Order a print of this model

Printables

Spaghetti tupperware 1661 lid

2025 update After a while the PLA would crack… just reprinted in flexible TPU.. looks good! A few weeks ago we lost the lid to the Tupperware Spaghetti canister. I could buy a new one, but figured it would be easy to model and print. It…

Order a print of this model

Printables

Tupperware compatible box

This model has fitting dimensions for a Tupperware box, just in case you need to replace a part. In case you want to print it as standalone as in the picture: I added some silicone to let both parts hold better together. Print settings: -…

Order a print of this model

Printables

Tupperware Spice Shakers 4x Rack

A rack for tupperware spice shakers designed to be mounted under a cupboard.

Order a print of this model

Printables

Tupperware lid holder

My wife was looking for a lid holder for all her lids. i couldn't find one here so i decided to model my own. I iterated it 4 times so far. the Holey version is the latest, it prints the fastest, and uses the least filament. tinker links…

Order a print of this model

Printables

Tupperware Airfryer Handle

This model is made for the tupperware airfryer. Replacement for the original one. 2 screws must be demounted and reused. The cover has a snug fit. First unscrew the 2 screws of the original handle screw in the model Tupper_HF_Handle with…

Order a print of this model

Printables

Cover for Tupperware

Cover for Tupperware, maybe need to enlarge it 1%. It's now little loose.

Order a print of this model

Printables

Tupperware Lid

Layer 0.2 Petg Pla …

Order a print of this model

Printables

Tupperware Spice holder (Gewürzhalterung)

I printed a new spice holder for the Tupperware spice containers. Our spice holder got brittle because it's a few years old. So i decided to 3d model the holder and print it via a 3d printer. The holder consist of single parts, which are…

Order a print of this model

Printables

Lid Rice Tupperware

Simple lid for Tupperware for Rice

Order a print of this model

Printables

Round Tupperware Lid Organizer (4"-100mm), 2 heights included (75, 150mm)

This is a remix of the excellent model https://www.printables.com/model/577522-mason-jar-lid-organizer by Starjun We have a lot of lids that are between 3 and 4 inches round, both for Tupperware style dishes and for lids for tumblers,…

Order a print of this model

Printables

Tupperware MahlChef inner part replacement

I created this part, as the original broke. Unfortunately the thing is not mine, so I cannot show a picture of it. I printed it 2 times already. The first version made from PETG worked fine, but with a very hard piece of cheese, the…

Order a print of this model

Printables

Shaker mesh for Tupperware junior quick shaker

This is a hexagonal mesh insert designed for the Tupperware Junior Quick Shaker. Originally intended for dressings, we wanted to expand the shaker’s use for mixing protein powder and other ingredients. To improve its versatility, I…

Order a print of this model

Printables

Tupperware Quick Shake REPLACMENT Mixer/Blade

I lost my original mixer/blade for my 500ml Tupperware Quick Shake. Print 3+ perimeters, 100% infill. I recommend printing in PETG ; “food grade” PETG filament is even better.

Order a print of this model

Printables

Peeler Handle replacement (for Tupperware)

Original thing was created by Thingiverse user Joesevens

Order a print of this model

Printables

Tupperware cakebox snaplock

Verschluss für Tupperware Kuchenbox

Order a print of this model

Printables

Spacer for Tupperware thermos flask

This part is required at the bottom to press the bottle to the top.

Order a print of this model

Printables

Tupperware pastry wheel / dough cutter D59 handle

Replacement for Tupperware pastry wheel handle

Order a print of this model

Printables

Tupperware Lid Holder

Ein Halter für Deckel von Tupperware Schalen zum Anbringen im Küchenschrank unter einem Regalboden

Order a print of this model

Printables

Tupperware rolling pin spacer 8 mm

I have the 6mm but it is too thin to bake speculaas cookies nicely, so I drew an 8mm in Inventor

Order a print of this model

Printables

Tupper Tupperware, Gewürzhalterung

Habe das Modell entworfen für einen Bekannten den sein Teil bereits total vergilbt war. Habe es erweitert für die Wandmontage und die unter Schrankmontage. Da ich die Halterung nachträglich entworfen habe kann ich das nicht testen ob es…

Order a print of this model

Printables

Tupperware potato pealer holder replacement

Since our beloved potato peeler broke, I scanned it and slightly adapted it.

Order a print of this model

Printables

Tupperware Cheese Mill spare parts

Printed from PETG with 0.3 layer height and 4 perimeter walls. Fine is for the bigger drum and Crude for the smaller one.

Order a print of this model

Printables

Modular kitchen cabinet lid holder (tupperware/IKEA etc)

Similar to a lot of other models, so nothing unique going on. Just wanted to try to model it and play with fillets and chamfers. Made sure to add rounded corners horizontal to the plate and chamfers the other way, for printability. Does…

Order a print of this model

Printables

Rangement couvecle tupperware universel Fixation toit

Pour ranger le couvercle de ces tupperware à la verticale en le fixant sur le dessus d'un placard. Taille universelle

Order a print of this model

Printables

Cup holder adapter for 1L Tupperware Eco Bottle

Order a print of this model

Printables

Multi Lid Holder for Tupperware

Remixed and existing Lid Holder (Thingiverse #4044807) to support … more! Extended it to store them very space-efficient

Order a print of this model

Printables

Wall Mount For Tupperware Gewürzriesen

Since The Wall Holder For The Tupperware Gewürzriesen is out of Print i Decided to Copy One in Fusion360 and Print it for my Own. Printed and Tested Works Great and is more reliable then the Original Print Settings Printer Brand: Creality…

Order a print of this model

Printables

Replace Handle - Tupperware SpeedyBoy

Replacement Handle for Tupperware SpeedyBoy

Order a print of this model

Printables

Wheat grass seed starter lid for Target-brand (up&up) tupperware

Order a print of this model

Printables

main gear for tupperware quick chef

Order a print of this model

Printables

Tupperware 2L Pitcher Strainer

Strainer insert for the Tupperware 2L "Slim Line" Pitcher. Designed for cold brewing tea, but might also work with hot drinks. You have to decide for yourself if you consider this food-grade and if you want contact with hot drinks.…

Order a print of this model

Printables

Couvercle tupperware

Mon ancien couvercle de tupperware a casser a plusieurs endroit et donc j'en ai modéliser un et il s'assemble parfaitement Je l'ai imprime en TPU 95A HF de chez Bambu Lab mais un TPU 95A classique fera surement l'affaire, je vous…

Order a print of this model

Printables

Tupperware Lid Holders (Kitchen Organiser)

Holder for Tupperware lids (for kitchen organisation). Big and small versions. Should fit most kinds of lids, but obviously YMMV. Can be printed without any supports if your printer can handle a little bridging (I printed the ones in the…

Order a print of this model

Printables

Tupperware Lid Holder v2

A simple holder for tupperware lids. The floor is curved to keep the lids in the center. Print Settings Printer Brand: Prusa Printer: I3 MK3S Supports: No Notes: Printed in PETG How I Designed This The holes in the sides serve mostly…

Order a print of this model

Printables

tupperware poultry shears locking mechanism replacement part

the shear is old but still works fine - the locking mechanism broke and my mum wouldnt like to throw them away. My first attempt was to fully print it with the cylinder but it was to weak. I decided to use a m3 bold idk. the exact length…

Order a print of this model

Printables

Tupperware Round Cake Taker Lock.

This 3D model comes to solve the missing lock on an old Tupperware round cake taker. I could not find one on-line, so I took the lock from the other side and designed a model that works, it took me two iterations, but because it is a…

Order a print of this model

Printables

Tupperware corkscrew

Printed with nylon works very well. Probably PET-G will be OK, but I didn't tried this.

Order a print of this model

Printables

Glassware Tupperware replacement gasket

This is a replacement gasket for a square glassware container. The F360 file is included so you can modify the dimensions to fit your own container. Print with TPU. 20% infill. 0.20mm layer height. 4 perimeters 4 bottom layers 3 top…

Order a print of this model

Printables

Tupperware Quirlscheibe für Mix Fix und Shake It, supportless

Da bei den aktuellen Shake-It Bechern keine Quirlscheibe mehr mitgeliefert wird, hier nun ein passendes Ersatzteil. Wichtig war mir ohne Support drucken zu können, um eine möglichst glatte Oberfläche zu erhalten, eine geringe Layerhöhe…

Order a print of this model

Printables

Manivelle tupperware

Manivelle de remplacement

Order a print of this model

Printables

Tupperware Cakebox Repair

Replaces broken Clip

Order a print of this model

Printables

Tupperware Quick Chef Chopper Crank Replacement

Print with the top upside down. Use filament with a little flex like PETG or ABS so the knob just snaps into place. Scale to your needs

Order a print of this model

Printables

Tupperware Cups Rack

Hook your measuring cups on this Tupperware rack. It hold with 3 screws in your pantry door. --- Support pour accrocher les tasses à mesurer de la marque Tupperware. S'installe sur une porte d'armoire. Permet de remplacer le support qui…

Order a print of this model

Printables

manivelle de remplacement tupperware moulin a fromage

Poignet tournante à clipper, écrou à visser, le tout en trois partie au lieu d'une d'origine

Order a print of this model

Printables

Tupperware Steak Knife Sheath - Schutzhülle für Tupper Steakmesser

Lost the original sheath of my steak knifes from Tupperware so I constructed this one. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: Filament PM PLA/PETG Notes:…

Order a print of this model

Printables

Quick Chef Tupperware

Hi, my moms quick chef handle was broken. So i decided to draw a new one based on the original.

Order a print of this model

Printables

Poistka tupperware mlynček SS224921

tupperware

Order a print of this model

Printables

Filament dry box storage - simple tupperware box (source included)

This is a very simple and cheap solution with a guide to make many storage boxes compatible. See below the whole how-to guide TODO: Links to Amazon / Aliexpress Attention : At the moment there is feedback that the length of the roll(s)…

Order a print of this model

Printables

Tupperware sugar mill cross

We own a sugar mill from tupperware and there is a small pastic cross which presses the sugar through the sieve. The problem is: this little cross formed plastic part is so weak, that the compressed sugar at the bottom of the mill forces…

Order a print of this model

Printables

Tupperware Lid Holder (Wide Base)

Order a print of this model

Printables

Tupperware Lid Holder

Remixed version of the Tupperware lid holders by Lewis2e, removing the extra space at the bottom as my Tupperware doesn't require this space. MY PRINT SETTINGS: Printer Print Time Layer Height Nozzle Material Filament Infill Bambu Lab P1P…

Order a print of this model

Printables

Schutz für Rüst- und Tupperware Messer

gedruckt in Prusament PETG

Order a print of this model

Printables

simple glass (sorta like tupperware old ones)

Make sure to use proper filament for food stuffs. Was just doodling and remembered these from way back, used to have a whole set all different colors from tupperware had the circle on the bottom held just enough to make a mess with :-).…

Order a print of this model

Printables

Cap for Tupperware rolling pin

Cap for rolling pin which can be filled with water. Pretty sure it's Tupperware. Print cap in high quality, eg 0.10 mm layerheight. Print gasket in tpu, or reuse an existing one. I used 0.2 layer height. Bottom layer concentric and then…

Order a print of this model

Printables

Tupperware Cake Taker - Fix

A fix for a Tupperware Caketaker. Use M3 Cap Head Screw with cut off cap.

Order a print of this model

Printables

Tupperware Lid Holder - Glasslock

Less material overall, less space between dividers, larger cutout at the bottom. Current version fits 4 lids. I plan to refine more to better fit Glasslock branded lids and add the larger version. I printed with a 0.6mm nozzle.

Order a print of this model

Printables

Angled Tupperware Lid Holder

Holds up to 6 lids. Fits any lid that is 5/8" (16mm) thick & 5" (127mm) wide.

Order a print of this model

Printables

Tupperware Airhole Cover

Replacement for broken tupperware airhole cover

Order a print of this model

Printables

Porta tapas (tupperware lid)

facil impresion y facil armado para tapas tipo tupperware o de cualquier tipo, tiene 8 espacios, se necesitan 2 partes de los rieles de para las tapas y 9 partes de tapas english easy printing and easy assembly for tupperware type lids or…

Order a print of this model

Printables

Tupperware 1L Bottle drying holder

Holder for Tupperware 1 liter bottle to let them dry. Print Settings Printer: Cetus3D Rafts: Doesn't Matter Supports: No Resolution: 0.3 mm Infill: 20 % Category: Kitchen & Dining

Order a print of this model

Printables

IKEA Skadis Holder for Tupperware Spice dwarfs / giants

A Simple holder for your pegboard in the kitchen. Constructed for the “spice giants/dwarfs” by tupperware.

Order a print of this model

Printables

Holder of couple Tupperware tilt'n serve dispensers

If your mom asks you for something to hold her Tuppwerware oil and vinegar containers , would you not design it? :D

Order a print of this model

Printables

Tupperware Lid Holder

This can be used to hold tupperware and takeout lids in kitchen cabinets. It can also be mounted in other areas to hold other similar items. Mounts with mounting tape, I cut mine to length then cut that into narrower strips.

Order a print of this model

Printables

Tupperware 0.25 l jug-lid

Replacement lid for the 0.25l jug. I printed this in black ABS which is not food-safe on a brass nozzle which is also not food-safe. (Because that's what I had in/on the printer at the time.) Please do your research on food-safe printing…

Order a print of this model

Printables

Tupperware - Löffel / Spoon Eidgenossen

Meine Schwiegermutter hat ihren Tupperware Löffel verlegt, daher habe ich unseren vermessen und ein 1:1 Modell davon erstellt. Der Löffel passt für die Eidgenossen Behälter. Druckbar ohne Supports. My Mother in law lost her Tupperware…

Order a print of this model

Printables

Rubbermaid Tupperware Lid Holders

Holds lids for the small and medium Rubbermaid tupperware. Printed both on the Prusa Mini. The Medium will need to be cut at the very top.

Order a print of this model

Printables

Tupperware Frische-Pavillon Siebeinsatz

Siebeinsatz für Tupperware Frische-Pavillon

Order a print of this model

Printables

porte glace tupperware

Dimensions: 117mm/103mm/25mm Carré:42mm/21mm Remplissage:20% Matière: PLA

Order a print of this model

Printables

Tupperware Lid Holder - Expanded

My wife wanted to be able to store multiple lids between dividers so I increased the space between dividers, increased overall length, and added some octagons in the dividers to reduce filament usage. Total length of print is just over…

Order a print of this model

Printables

wall mount for tupperware peeler

Diese Wandhalterung habe ich für meine 3 Sparschäler von "Tupperware" erstellt, damit sie jetzt immer gleich griffbereit zur Hand sind entwickelt mit Tinkercad I have created this wall mount for my 3 peeler from "Tupperware" so that they…

Order a print of this model

Printables

Stand for Tupperware Small Spice Shakers (Gewürz-Zwerge)

Tired of having a drawer with mixed Small Spice Shakers and Big Spice Shakers (Gewürz-Zwerge and Gewürz-Riesen) of Tupperware not being aligned at the same height? With this stand you can fill the gaps. Just place it underneath a Small…

Order a print of this model

Printables

Tupperware Hood for RC Jet Boat Bashtech

Print base in any material you like (ASA in my case), lid needs to be in soft TPU Glue base to the existing hull, seal it with more glue or silicone and pop the lid on. There was zero leakage in my make, but it took me a while to get the…

Order a print of this model

Printables

Tupperware cheese slicer rotary drum

My mother-in-law old tupperware cheese grinder get broke. At the end of the rotary drum the threaded section is fractured. This section connects to the crankshaft and is too weak, so I designed it thicker than the original. I've been…

Order a print of this model

Printables

Tupperware Speedyboy Repair

In our rotational Cutter from Tupperware the gear which transports the force to the knife's broke. So i designed it as close as possible to the original one. Fiirst i printed it in PLA but it not last for a very long time. So i decided to…

Order a print of this model

Printables

Tupperware Deckel Organiser

Ich habe diese etworfen da es bei uns zu Hause auch ziemlich viele verschiedene Deckel gibt, in allen möglichen Größen. Da wir diese allerdings nicht stehend in unserem ausziehbaren Laden verstauen können, musste ich sie um 45° neigen,…

Order a print of this model

Printables

Tupperware Lid Holder

Are your Tupperware lids all over the place and completely on organized? This is a kitchen organizer, allowing you to organize your Tupperware lids into an easily accessible place. It is also a modular system, with each piece being able…

Order a print of this model

Printables

Tupperware Bottle (with Keychain version)

This is a 3D printable model of a Tupperware bottle, based on a scan from a real bottle. It is available in two sizes: regular and small. The small version has a ring loop so you can use it as a keychain.

Order a print of this model

Printables

Binding Clip for Tupperware Lid Holder v2

I didn't want to bolt the tupperware lid holders to my cupboards, but needed a way to keep them from moving around. This clip snaps in between two holders and is held in place by the circular pad. No supports needed. Any infill of your…

Order a print of this model

Printables

Tupperware lid holder

Three vertical structures for organizing tupperware lids (IKEA) in kitchen drawers. There is one for round tupperwares, one for rectangle ones, and one for the small square lids. The ikea tupperware lids stack onto each other, and the…

Order a print of this model

Printables

Honeycomb Linkable Tupperware Lid Holder

A remix of the linkable lid holder, with a honeycomb pattern to save on material use/cost.

Order a print of this model

Printables

DIY drybox from tupperware

This is a DIY drybox made from this 3,4 L cereal container. It easily holds a D=200mm W=55mm spool, wich are all most common 750gram spools. Tupperware container can be purchased here:…

Order a print of this model

Printables

Tupperware bottle Hande

I made this for my mom after she ordered a Tupperware bottle that doesn't have one by mistake. Please be aware of the sizes, your bottle might not be same size. To assemble simply unscrew the cap all the way and fit in the handle. I'll…

Order a print of this model

Printables

Tupperware freez container lid holder

Tupperware freez container lid holder. To hold lids from tupperware freez container. In diverent hights. 4 lids fits in the 35mm hight version.

Order a print of this model

Printables

Tupperware - Puderzucker Deckel

Deckel für den Puderzuckerstreuer von Tupperware

Order a print of this model

Printables

Tupperware lid holders

Made the slots wider to hold lids sideways and to accommodate bigger lids. Added holes to screw down to drawer

Order a print of this model