Counting matching models…
This is a simple frame to fit around a wifi thermostat (can be found on Aliexpress) The model I have is a Beok Tuya WiFi Heating Thermostat My previous thermostat was wider and there were marks on the wall so this covers it up and covers…
A vertical mount for a cheap tuya zigbee or wifi PIR (passive infrared)/mmWave motion presence sensor I found on AliExpress that is compatible with the IKEA SKADIS pegboard system. I printed it vertically with tree supports for the hooks.…
A minimal stand to hold the Tuya Smart Life Zigbee Matter Hub Gateway in a vertical position on a desk or shelf. Hub measures 90mm x 20mm. Two versions, one with two screw holes 120mm apart. No supports needed. Print as pictured.
Something to mount the Tuya Smart Life Zigbee Matter Hub Gateway to a wall. Mount keeps hub slightly away from wall for additional cooling. Hub measures 90mm x 20mm. Four mounting options to pick from: Matter Smart Hub Wall 40mm CS: Two…
This is a replacement drive gear for the Tuya Smart Curtain Robot (2A4VM-LY1668). If your robot's motor is whirring but the wheels aren't turning, the original internal gear has likely stripped. This part is designed to be a durable…
With this wallmount, you can mount your Tuya Zigbee Smart Knob to a wall. The Design is like the Fututre Linear Series from Busch Jäger. At the backside, the is space for a 5x2 mm magnet and for double sided tape.
Housing for Zigbee round thermometer - hydrometer (Tuya or HA) diameter 40mm, thickness 14mm for outdoor use Pouzdro pro Zigbee kulatý teploměr - hydrometr (Tuya nebo HA) průměr 40mm, tloušťka 14mm pro venkovní použití
Wall mount for Tuya Zigbee Garage Door Receiver, https://www.aliexpress.com/item/1005005622553564.html . Should be a press fit for easy insertion and removal. Wiring: Connect one wire to NC (normally closed) and the other wire to NO…
Tuya Bluetooth Temperature Humidity Sensor LCD TH05F AAA case with room for battery holder The sensor can be found on aliexpress:…
Zadní tisk s podpěrou, pod PETG bych nešel.
This minimal holder is designed specifically for the Zigbee ZG-102Z door / contact sensor by Tuya . It provides a clean, simple mounting solution while keeping full functionality and easy access to the device. Key Features 📏 Perfect Fit –…
This fits the generic temp/presence sensor from Hobeian: https://www.zigbee2mqtt.io/devices/ZG-204ZV.html
Use an M5×10 screw to mount the holder onto the L-profile, and M2×12 screws to connect the radiation shield to the holder. Print with white PETG filament.
I lost the back to my tuya vibration sensor cause the dryer that it was mounted too before i was replacing the battery got thrown out. SO i needed a new way to mount it. Here you go! A circle with walls. It also includes a cut out for the…
Remixed the original to include a simple loop to enable hanging of this unit
This housing holds the Tuya ZG-103Z vibration sensor in place. It snaps into place, and also keeps it in a specific angle using the coin-open hole at the back of it. This way you can replace the battery without worrying about the sticker.
Did you toss out the filter frame with the filter? Yeah... me either. This one can replace it.
Grille aération pour tuyau P.V.C1 00 mm. Diamètre de la grille 93 mm Ext pour vide sanitaire ou autres.
Used to hold the Tuya WiFi Door contact sensor & magnet. I have them mounted in our Mailbox & Front Door Package Drop-box. Used to alert us when the mailbox door, or Package Box lid is opened and closed. The manufacturer's solution was a…
The latch of the battery compartment lid is often damaged. Here is the solution.
Holder for mounting a Tuya Temperature & Humidity sensor in the enclosure of Bambu Lab X and P series printers. This holder is inspired by the one created by SD4LABS on Makerworld for a different sensor. So if you are looking for a holder…
Remix of the silica box created by humebeam for his awesome Python AMS. This is a slight modification to the silica box to be able to hold a Tuya Zigbee smart Temperature & humidity sensor. Im not sharing a print profile for this because…
Sunlu S4 Tuya Sensor mount Remix of Sunlu S4 Hygrometer Upgrade by Moon_3D to fit a Tuya Temperature & Humidity Zigbee sensor. Also made a little thicker and sturdier at weak spots. Air Vent Air vent added for correct sensor readings…
Presentoir avec tuyau PVC - Design modulaire pour ajustement de la hauteur - Diamètre 10 cms Display stand with PVC pipe - Modular design for height adjustement - 10 cms diameter
I needed something to make connections to the pads while I tried to flash a KMC Smart Tap Mini with OpenBK. It uses a Tuya CB2S module that's edge-mounted through the main circuit board. This jig can be held/clamped against the bit that…
Tuya Smart ZigBee Thermometer mouting plate for Elko frame
This is a simple frame to fit around a wifi thermostat (can be found on Aliexpress) The model I have is a Beok Tuya WiFi Heating Thermostat My previous thermostat was wider and there were marks on the wall so this covers it up and covers…
It the simplest holder i could come up with. May add a ball-joint to the back, in case i want to mount in a differnt one, depends, how well it will function.
I didnt want to buy the CR2430 batteries for the Tuya 4 button switch. I had some parts lying around from some old projects and realized this stand was perfect for hiding a battery pack with 2 AA batteries and the plugs that I was able to…
double garden hose connection - raccord double tuyau d'arrosage type gardena Paramètres d'impression 3D, printing setting petg - layer 0.15 - bed 85°C - nozzle 240°C
A vertical mount for a cheap tuya zigbee or wifi PIR (passive infrared)/mmWave motion presence sensor I found on AliExpress that is compatible with the IKEA SKADIS pegboard system. I printed it vertically with tree supports for the hooks.…
I got this zigbee button off aliexpress (5cm diameter, 9mm heigt). It's supposed to be taped directly to the wall, which will make switching the battery an issue later. I couldn't find an existing holder so quickly made this myself.
This Smart Knob Dimmer sleeve (bearing?) will make the knob operation less wobbly and gives the cheap device a confident touch. “It punches above it's weight.” But kidding aside, the sleeve minimizes much of the wobbliness caused by the…
This is a simple model, meant to tightly fit the Tuya presence sensor. You can orient the sensor so that the cable exits either side (or the top if you like). Printed at 0.2mm layer height in PLA.
This is a battery cover for Tuya PIR sensors (it fits at least the ZG-204ZL and IH012-RT01 models that I have). For some reason, I had two broken battery covers over the last year. Time to make new ones. These come with serrated edges and…
I designed a simple model to install a Tuya smoke detector on the filament arm of the Neptune 4 Plus 3D printer. Safety first, right? Printed in PLA+ or PETG without supports. Just 2 6-8mm M3 screws and nuts needed.
I designed this to hold a Tuya (insert model here) humidity and temperature sensor for my filament dry box. The mount is designed to attach the sensor to a dry box lid or wall, allowing easy readings from outside the box. A gap was…
Description : Ce fichier 3D est conçu pour imprimer un support incliné à coller pour la sonnette vidéo Tuya WiFi avec caméra HD (format 54 mm x 85 mm avec des bords arrondis de 7 mm). Ce support permet de décaler une extrémité de 45 mm du…
I purchased a Tuya Zigbee Thermometer for monitoring the temperature of my enclosure. I wanted to improve the visibility of it so designed this hanging door mount for it. The circle cut-out is to make it easier to remove. Printing…
I am using a Tuya TS0044 4-button Zigbee switch with zigbee2mqtt. The original power source of the switch (2430 3V lithium cell) does not last long. I therefore modified the switch with a rechargeable 3,7V lithium battery (+ diode). This…
ensemble de fixation pour les tuyaux d'évacuation d'eau. Tous les modèles des tailles les plus standards. Vous trouverez les diamètres suivants: 32 mm 40 mm 60 mm 80 mm 100 mm 125 mm Pour le technique: Du diamètre 32 mm jusque au diamètre…
permet de raccorder les deux tuyaux de l'adoucisseur sur 1 tuyau de 32 sans manchon , imprimé en PETG noir de chez jayo
A simple holder for Tuya tempeature / humidity sensors. It is designed to be hanged with one screw (see pictures). The sensor fits easily in the holder and is hold by gravity. Print in PLA or PETG.
A simple stand for the Tuya Zigbee temperature / humidity sensor. Print it in PLA or PETG. 15% inffill, no supports needed.
Printed in PETG, at .16mm layer height on a Bambu A1 Mini. Supports not needed.
Support Cable/Tuyau Flsun T1 Pro Airhose and cable bracket Flsun T1 Pro S'adapte Parfaitement sans forcé.
This is a replacement lid for the TuYa TS0601 Thermostat I made because mine was broken. The little metal piece is straight from the original lid, it just clips onto the provided nubs. Printed with 0.12mm layers with Sunlu PLA+ White on…
j'ai créer cette boite de dérivation pour se loger en dehors des boites dans les murs de base car pas de place pour ce module (interrupteur ou prises) de ce faite il peut être mis sur une prise ou éclairage sans modifier le câblage de…
Simple remix (stretch Z\cut bottom) of an Aqara wall mount by Jujumo on Thingiverse to fit my Moes Wireless Scene Switch ESW-0ZAA-EU. Should be the same to Tuya 4-button switch and other similar models.
I wanted more stable stand that will not glide on the desk. It uses 10mm stick-on rubber feet and is pressure-fit together. The back-plate replaces the original one and screws on with the original screws. The sensor model: Tuya ZY-M100-2W…
This is a mount for cheap, round Tuya motion sensors . I used Sonoff SNZB-03 sensors before, but those have no illumination sensor. Since I had them mounted already, I decided to adapt the mount to fit my new sensors. The original model…
Simple slide-in mount for the control box used for the Ambilight from Action/Tuya/Eurodomest Article number 3017060. Mounts with a single screw to your VESA mounting of the TV.
Simple print to mount Tuya smart buttons wherever you want but also be able to easily remove them. They could have more than one use, when you need to change the battery or need to reset it. I use them with Home Assistant. I'll provide a…
Mask to adapt the detection angles and range for the Tuya IH012-RT01 Zigbee Motion sensor. I created this model to mount the sensor above my dining table, so that the light above the table is turned on when we are sitting at the table.…
I have designed a holder for the Tuya Zigbee motion sensor, available in two versions: Version with nuts V2: This version uses M3 nuts and M3x16 screws to ensure a stable attachment. Version without nuts V1: In this version, the screw is…
Adaptateur pour Aspirateur PNTS 1400 HS et Ponceuse Bosch PEX 220 A Cet adaptateur sur mesure facilite la connexion entre votre aspirateur PNTS 1400 HS et votre ponceuse Bosch PEX 220 A, garantissant une aspiration efficace des poussières…
This is designed to convert the Tuya WiFi LCD Temperature Humidity Sensor via USB instead of using 3 AAA cells. Along with this print, you'll need Small length of red and black wires “USB 3.1 Type C Connector 16 Pin Test PCB Board Adapter…
A simple vertical stand for Tuya PIR sensors. Simply press the sensor into the stand.
I use double sided tape. Included .f3d files for further modding needs.
I have designed a custom housing for the Tuya brightness light sensor to provide effective protection against external influences. This housing is suitable for both indoor and outdoor use. The sensor is effortlessly installed by simply…
I've recently started my journey down the 3D printer rabbit hole, and have since acquired more than 4 spools of filament. Because of that I needed dry boxes, and because of that I needed humidity sensors. Because I wanted them integrated…
Il s'agit d'un support pour installer un Tuya smart meter dans un tableau électrique, Aucuns paramètres spécifiques nécessaires.
Battery Case for Sonoff Tuya Motion Sensor I have created a custom case designed to hold two AAA batteries, specifically tailored for the Sonoff-SNZB03 or other Tuya motion sensor. You can choose between two options for installation:…
Wall holder for Tuya temperature and humidity sensor with LED screen.
replaces the original rear of a ERS-10TZBVK-AA aka TS004F smart knob with a sliding rail. I found the stock magnetic holder to easily go flying off the wall if adjusted clumsily supports needed
English I designed a new case for the Zigbee window sensor from this link . The original sensor had a height of 12.7 mm, which didn’t fit into my window frame. The new case, with a reduced height of 10.8 mm, now fits perfectly into the…
In my smarthome I use Tuya zigbee 4 Gang switches, that were mounted above the normal Busch Jaeger switch, but the switches look different and you don't use the original switch anymore, so it's a bit obsolete, but wanted to keep it, in…
Espaçador para fechadura tuya para portas com espessura menor que o recomendado. Tuya lock spacer for doors with a thick
Suporte de parede para os alarmes da linha Tuya, sendo esse especificamente da marca Kabum.
Mounting bracket with two screws for TH02Z thermometer. Print with supports.
Made this simple case to give aZP01 Tuya Wifi/Zigbee Motion Sensor a little more protection for outside use. Added a version of the backplate with holes for zipties as well. Category: Other
Pour plus de résistance, à imprimer debout (tuyau à la verticale) avec supports. Filament PETG recommandé. Les trous de la pièce sont de 5.2mm pour accueillir des vis M5.
A stand to hang the camera upside down so that you have full range without having to drill it into anything. The dots at the top ensure that the camera can rotate properly.
A minimal stand to hold the Tuya Smart Life Zigbee Matter Hub Gateway in a vertical position on a desk or shelf. Hub measures 90mm x 20mm. Two versions, one with two screw holes 120mm apart. No supports needed. Print as pictured.
Tuya Door/Window Opening Sensor Outdoor Protector
Made for Tuya Curtain Motor to Blind motor cause I bought wrong tool for blind need 28x12x8 bearing in blind gear and 13x7x4 bearing in tuya gear
Baseplate stl: https://www.thingiverse.com/thing:3793392/files
Case for temp & humidity sensor with posiebility to hang outside by wire or rope
The Tuya Zigbee thermometer I bought from AliExpress is packaged with a (rather small) mounting sticker. Once removed to change batteries the sticker has to be replaced. Also you could potentially damage the surface it was mounted on. So…
Something to mount the Tuya Smart Life Zigbee Matter Hub Gateway to a wall. Mount keeps hub slightly away from wall for additional cooling. Hub measures 90mm x 20mm. Four mounting options to pick from: Matter Smart Hub Wall 40mm CS: Two…
Insert the original Tuya magnet part, with its tape as padding, in the print. Add the lid. Attach with double-sided tape. The hole on the bottom will help remove the magnet part by pushing it out. AliExpress links to buy the components:…
Print in the orientation of the 3MF file, or the small pegs will snap. I printed in PETG and used support, which was a bit hard to remove. Print a Multipoint to hook it onto a Multiboard wall.
A small wall mount for the Tuya ZY_ZHPS01 presence sensor. You just need one screw to mount it on the wall.
Dieses Modell ist ein einfacher Halter für einen Tuya Zigbee Bewegungssensor mit 2xAAA Batterien. Der Sensor ist damit um 2 Achsen schwenkbar. Was braucht man sonst noch? Zwei Einschmelzhülsen M3 Zwei Schrauben M3x20 mm mit Sechskantkopf…
support tyau d'eau fixation par deux vis diamètre max 5 mm impression facile sans support replissage 25 % impression en 1h10 sur anycubic kobra 3
I bought: The HAZOEE - TUYA Multi Sensor (4-in-1) with "recessor" and broke one :-( Ordering and shipping a new one is quite expensive …and of course one can NOT order just a "recessor". The original, had the magnet mounted (with a screw)…
Printed myself in Sunlu ASA green which has the right aesthetic with the Sunlu logo.
Adaptateur pour tuyau de VMC 125mm vers 80mm imprimé en ABS ou PETG
Tuya Zigbee/Wifi Human Motion Presence Sensor Angle Mount Including Autodesk Fusion 360 CAD File
This low-profile wall mount is designed for the Tuya TS0044 smart 4-button scene switch (e.g. Zigbee models by Zemismart, Moes, etc.). It allows you to mount the button directly over a standard European wall switch without modifying the…
Basic wall mount for a Tuya Gateway hub. Friction fit so the hub just pushes in. Print in whatever material you like, photos are PLA+. 15% fill is plenty strong enough.
La gouttière permet de fixer le tuyau et le crochet permet de suspendre le masque (pas comme sur la photo envoyé par mon patient ;)). La version proposé au téléchargement a été modifié par rapport à la photo car à la demande du patient…
das Gittertor ist meistens schmaler als Eingangstüren, deswegen muss man die Zwischenräume ausgleichen. Die Stärke beträgt 12mm, gedruckt aus ASA-CF
Wall holder (hanger) for Tuya TS0201 Temperature Sensor. Use double sided tape.
Back plate for Tuya TS0201 Temperature and humidity sensor (zigbee wifi) The hole is marking “top” because top and bottom slots are not the same size. SNUG FIT
Support pour mettre au niveau d'une table ou du bassin le tuyau d'aspiration et libérer une main lorsque l'on coupe ou meule quelque chose à la Dremel! Imprimer 2 fois renfort 1 et renfort 2 posés sur la tranche remplissage 100% pour la…
