Counting matching models…
Originally published here: Luna with exaggerated topography scaled one in twenty million by tato_713 - Thingiverse This model is made using the most up to date topographic map from the NASA site, from the latest MOLA data. The topography…
Ned From the Twenty One pilots Music video turned into a keychain Rotate the model to print Category: 2D Art
Made a set of rear wheels for my Ambrogio L15 deluxe (MY2021) lawn mower robot to increase traction in steep sections. Smaller spikes are used to allow for grip if the thin large section looses grip. Spikes might improve aeration of the…
Originally published here: Europa with approximate topography scaled one in twenty million by tato_713 - Thingiverse This model was made with MATLAB r2016a with the map from the JPL Solar System Simulator. I'm not sure if this map is a…
2-piece AshTray with a De-Bowler and holes to store extra stems TOP requires support but it is VERY minimal. Printed in PETG - 20%infill - 3 walls/perimeters
Originally published here: Io with known topography scaled one in twenty million by tato_713 - Thingiverse This model was made using MATLAB R2016a on the DEM (digital elevation map) of Io from White et al (2014). Like with many of the…
Keychain of the Twenty one pilots logo Category: 2D Art
5 blade Ambrogio Twenty Cutting disc Better cutting, less noise. It can use cheaper blades from Husqvarna, Gardena or chinese clones. Worx Landroid blades have a larger hole diameter but you can still use the Husqvarna screw it the head…
Only tested on 2019 model, but I think they should work on 2020 model too. The wide rubber stock wheels of the Ambrogio L15 caused too much 'matting' on my young lawn, with very visible tracks and poor mowing performance as the the mower…
Animated Logo of the Twenty One Pilots that can be controlled via an Webinterface running on a Wemos D1 mini utilizing WS2812 LEDs. Print instructions Summary I've designed and built an animated RGB logo from the new Twenty One Pilots -…
Twenty One Pilots logo during the Breach era c: 0,4mm nozzle 1wall Enjoy!
Here's a cute, simple vase perfect for scaling and vase mode printing! Are you interested in selling your prints of my designs? Join my Printables Club , and start making 💰 with your idle printers!
Originally published here: Triton with known topography scaled one in twenty million by tato_713 - Thingiverse This model was rendered using MATLAB R2016a on topographic map from Schenk (2008), made with the images from the Voyager…
I made this for upcoming show to handout to fellow Twenty One Pilot fans and it also supports a FB group ”Random Acts of 3D Printing Kindness" This is replica of bands logo that was first shown in 2021. Keychain is double sided with same…
three twenty one pilots key chains to customize your bags, or purse, or keys, or whatever.
Originally published here: Luna 4 billion years ago scaled one in twenty million by tato_713 - Thingiverse This is an hypothetical representation of how could look the Moon during or shortly before the Late Heavy Bombardment. It was…
You need 3 brass M4 inserts and generic 35x18mm titanium coated blades compatible with husqvarna. Also 4 M4 bolts (20-25mm) to mount the disc. I print the base in PETG, though PLA will probably work too. The cover ideally in…
Blurryface Album Hueforge! |-/ Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 1.3mm and…
In the music video for "Choker", a small dragon minifigure is used. They used an existing toy dragon by Safari Ltd that sells for around $1, and yet I've seen people peddle them on ebay for $30+ saying they're exclusive TOP merch.…
Simply a TOP logo, I mounted it to the wall using some poster tape. You can do whatever you like with it, scale it down or up. It should work fine
I printed this on my Bambu Labs X1 Carbon and did the first layer in black then the rest in red.
Clancy Hueforge | Twenty One Pilots Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.6mm…
I made this for upcoming show to handout to fellow Twenty One Pilot fans and it also supports a FB group ”Random Acts of 3D Printing Kindness" This is replica of bands logo you see on Clancy album. Keychain is double sided with same…
I made this for upcoming show to handout to fellow Twenty One Pilot fans and it also supports a FB group ”Random Acts of 3D Printing Kindness" This is replica of bands logo of Vessel - very similar to Regional at Best. Keychain is double…
This model is a remix of Damme's “Worx Landroid Customizable Cutting Disc” to work with Ambrogio L15 or Twenty mower robots. It significantly reduces mowing noise and results in a clean and even cut lawn. You can reuse the original blade…
I made this for upcoming show to handout to fellow Twenty One Pilot fans and it also supports a FB group ”Random Acts of 3D Printing Kindness" This is replica of band's logo from Trench. Keychain is double sided with same image. 3…
Scaled And Icy Album Hueforge! |-/ Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.8mm…
Trench Album Hueforge! |-/ Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the…
Nice little print keychain thingy Giving some of these out at Breach tour LA Night 2 I don't recommend going lower than 2.8mm for the total height make sure you print it with at least 4 top and bottom layers I recommend rectilinear or…
I made this for upcoming show to handout to fellow Twenty One Pilot fans and it also supports a FB group ”Random Acts of 3D Printing Kindness" This is a reproduction of Regional at Best. Keychain is double sided with same image. 3…
I made this for upcoming show to handout to fellow Twenty One Pilot fans and it also supports a FB group ”Random Acts of 3D Printing Kindness" This is replica of bands logo of Blurryface. Keychain is double sided with same image. 3…
Twenty One Pilots Chestplates for twenty one pilots fans. Good for making dummy 13 gifts for twenty one pilots fans!
Breach Album Hueforge | Twenty One Pilots Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x198.2mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is…
This object is a Twenty One Pilots logo from the album "Trench". I LOVE Twenty One Pilots, and decided to make a charm/keychain of their most well-known symbol. I made this in the middle of 2025. Enjoy!
TRENCH - Twenty One Pilots Album Cover Art (4 Colors) Please DM me for hfp files for hueforge Project: Trench HueForge.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 210x210mm in size You…
Twenty One Pilots MTV unplugged Album Hueforge! |-/ Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max…
Inspired by the RS90, FlexRC Owl and DJ105 enclosed prop designs, I have set out to make a capable 2S indoor and outdoor quad that you can easily create at home, add your own electronics stack and fly without fear of breaking. There is…
Originally published here: Rocheworld scaled one in twenty million by tato_713 - Thingiverse This is one of the fictional planets orbiting Barnard's Star in the Robert L. Forward hard sci-fi novel Flight of the Dragonfly ; or Rocheworld…
Mount any road sign to your wall which uses a slotted extrusion on the back to mount. The design is fully parametric so you can adjust it to whatever size or shape of road sign you have lying about. Included are files for a standard small…
UPDATE 2026-04-23: after a few weeks of mowing they are keeping up very well and have actually pretty good grip. Maybe even better than the original ones. And they have especially enough grip to ensure proper contact to the docking…
I made a Twenty One Pilots inspired Cassette for my shelf as decoration and as give away for other fans. Print Settings: 0.2mm layer 2 walls 15% infill No Supports I used a X2D with AMS for printing in all 4 Colors (Matte Chorcal, Matte…
Print the cold shoe adaptor vertically, on-edge, and add supports. Print the wheels flat, and add a pause/color change to insert a quarter-twenty nut, one each. Assemble with a bolt of any length an inch or longer and Optionally add a…
Calling all Twenty One Pilots fans! Show off your Vessel CD (or any other favorite album) with this custom-designed 3D printable display stand. Featuring the iconic album title in its distinct lowercase 3D lettering, this stand is the…
Calling all Twenty One Pilots fans! Show off your Trench CD (or any other favorite album) with this custom-designed 3D printable display stand. Featuring the iconic album title in bold 3D lettering, this stand is the perfect addition to…
DO YOU GUYS EVEN READ THE TITLE
This object is a Twenty One Pilots logo from the album "Trench". I LOVE Twenty One Pilots, and decided to make a charm/keychain of their most well-known symbol. I made this in the middle of 2025. Enjoy!
Twenty One Pilots logo during the Breach era c: 0,4mm nozzle 1wall Enjoy!
Twenty One Pilots Chestplates for twenty one pilots fans. Good for making dummy 13 gifts for twenty one pilots fans!
I made this for upcoming show to handout to fellow Twenty One Pilot fans and it also supports a FB group ”Random Acts of 3D Printing Kindness" Keychain is double sided with same image. 3 Different sizes are in the file. You can use…
This is an additional component to add a twenty degree wedge to the big pulley of the V2 OG star tracker. The wedge is designed to take a latitude adjustment base that is readily available on line (see attached photo for the type). The…
Speaker box designed to hold a DF MP3 module, 400 pin breadboard, and a 9v battery. Designed with a TwentyOnePilots theme for my kids. Exact parts used: Speaker 400 Pin Breadboard 9V Power Supply Parts that I just had around - 3 buttons,…
Tesla Coin is an imaginary digital cryptocurrency inspired by technological innovation, sustainable energy, and automation. It serves as a conceptual payment token for a smart ecosystem of devices, electric mobility, and decentralized…
⊬ a NED twenty one pilots funko pop for all fans! great gift! 21p TØP TOP 21P collectible for me it was very small, just size it up LoL also cut off some of the bottom foot so it would touch and than rotate LOL flashforge adventurer 5m i…
This is a model I designed that is based off of my speaker box. It is mainly Clancy themed, except for the NED and the Vessel top.
A Twenty One pilots sign that says “From Here”. These signs appeared on their social media when they were annoucing their concert. I made this using TInkercad and I have also uploaded this to my Thingiverse account:…
Description Calling all Twenty One Pilots fans! Show off your rare Regional at Best CD (or any other favorite album) with this custom-designed 3D printable display stand. Featuring the iconic album title in bold 3D lettering, this stand…
Calling all Twenty One Pilots fans! Show off your Blurryface CD (or any other favorite album) with this custom-designed 3D printable display stand. Featuring the iconic album title in bold 3D lettering, this stand is the perfect addition…
Twenty One Pilots is a great band. I made this coaster of their logo in fusion. It can be a bit of a tight fit for the white but pressure against a flat surface seemed to do the trick The red and white can both be replaced by yellow Just…
Choose either the numbered or the blank and print without supports. Want to cheat? Use the STEP file to add a nut or other weight. If you want a stylish pencil holder or display piece, slice the blank D20 in spiral vase mode at 300%…
The new logo of Twenty one pilots as of 2024 made in 2 sizes, 50mm and 21 mm.
NOTE I haven't added the auto color change, so you have to set it up in your slicer. enjoy!
Printed using a Prusa XL with default PLA settings. Also including an alternate option for Trench with solid text instead of the outlines; if trying to use the logos/titles as negative modifiers instead of different colors, the original…
Twenty-sided decorative necklace. Dimensions 30mm 17mm 17mm. Hole dimensions 3mm.
Logo twenty one pilots clancy Pro mmu/AMS. Size: 80 x 80 x 1 mm
