11 models
My customer needs usb wifi solution, this wifi 6 adapter fits our reqs, but we need to hang it to wall near pc instead typical desktop placing. So i ve made this simple hanger. Prints in one hour, simple design, 7m of filament. Printed on…
Print approx. €1.24–€1.52 excl. taxPreliminary estimate for one variant
This torx screw cover will hide every TX20 screw head! just pop it right in. Normally you buy a paket of these in your hardware store if the old ones break, but due to 3d printing there is no need for that, now you can just print a…
Support to install two 120 mm fans on an Asus Dual GeForce RTX 2060 Super using the mounting holes of the stock shroud. Requires M2 inserts to be inserted into the base of the posts to be used with the default mounting holes and screws.…
Modified the original Anemometer cup design by PlasticyBits for the TX20 La Crosse Weather Station. Had to lower the cuts to clear the housing, and angled the ends for a better fit in the dome. . Also had to move the magnet slightly,…
Air Arms TX200 cocking lever e clip removal and fitting tool infill 100% The clip needs to be rotated so the open side is up then put the tool over the clip and put your finger on the end to stop it slipping of then just pull. To refit…
Frustrated with the low cranking amps of the stock battery in my 2018 Mustang GT350R I ordered an Antigravity ATX20-HD lithium phosphate battery with a much higher CCA rating and significantly reduced mass. Because the ATX20-HD is much…
Replacement remote control housing that fits the tx2028 this model does require the original buttons and a m3 screw insert.
A previous owner had cut out the battery bracket on my stupid little sports car to install an Odyssey PC680. When it came time to replace that battery, I opted to install a Yuasa YTX20HL-BS and drew up this bracket to replace the Odyssey…
This is a PCIe card baffle for TP-Link TX201 2.5G ethernet card for the Lenovo M720Q and similar Tiny PCs. I printed it in PETG 20% Infill.
A previous owner had cut out the battery bracket on my stupid little sports car to install an Odyssey PC680. When it came time to replace that battery, I opted to install a Yuasa YTX20HL-BS and drew up this bracket to replace the Odyssey…
Frustrated with the low cranking amps of the stock battery in my 2018 Mustang GT350R I ordered an Antigravity ATX20-HD lithium phosphate battery with a much higher CCA rating and significantly reduced mass. Because the ATX20-HD is much…
