123 models
Onychodictyon Ferox was a worm-like creature that lived in the Early Cambrian period, about 525 million years ago. It's considered a lobopodian, an extinct group of worm-like animals with stubby legs. Here are some key features of…
Print approx. €8.33–€10.18 excl. taxPreliminary estimate for one variant
Introducing the Loftyo figure! The incredibly articulate, insanely expressive action figure for displaying, playing, and animating. This figure is the result of five basic craft prototypes, hundreds of hours spent learning blender and 3-D…
GONE ARE THE HORRORS OF THE 3MF! The loftyo figure, now as a downloadable STL! Enjoy!
This is an OpenSource Yoke to be used with flight simulators! Due to a bug in Thingiverse's website (never emailed me back!), the first version exists only as a link and was not posted on my maker page or in searches. This is a re-upload…
These are the print files for the CadetYoke Open-source project. You can find wiring and BOM information here: ( https://create.arduino.cc/editor/vince_prints/5a0c7cba-663a-4108-b88f-435a6f6495b5/preview ) Video Demonstration: Print…
Gone again are the horrors of the 3MF! The Loftyo figure - now separated for easier multicolour printing - now as STL files! The files are named, and you will need one of each, however choose either with or without magnets for the head…
Loftyos hand expansion pack
Navrhl jsem tenhle jednoduchý a pevný držák na Joystick s kovovým šroubem. Šroub a matice pro dotažení ke stolu jsou M12X50. Inbus Šrouby pro uchycení joysticku jsou M5X20. Inbus Díl matice nalisovat na šroub M12. Tiskne se to snadno bez…
Tired of the same hands? Then look no further! Brand new hands for your Loftyo! Whats not to love? Print either Loftyo All Hands or ones of your preference!
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
the newest thing to be spit out by the What The Mutt Studios 3D Design Division, this is the Lofty version of the new loftyo by Lofty! while there are a few other Lofty Loftyos made by very talented people, I wanted to: 1. make my own for…
This is the buff torso to lofty don't forget to take a picture and show it to me
repo loftyo this is a fixed one because the first one was messed up
Loft Studios has made Brody animes infamous swoosh and to complete the trio I made hamination I have looked though all the video's w/ Brody and swoosh and I can say that my model is extremely accurate to loft studios Also you can not use…
This is the lofty version of the loftyo, with round face pieces, and extra hands.
Guilded guy is the first figure where one face piece can equal multiple faces
This is a recreation of the Loftyos faces from Kickstarter (including the exclusive ones). It features two more faces
It's a Loftyo attachment, enjoy making it kind of look like swoosh. You do need to get the ball that slides into the hair peace because I re-used it. Also, you'll need to rotate it 90 degrees because I modeled it upright.
I ordered a broken VelocityOne for 20bucks from the UK, my reason being to find out whats wrong with it and repair it. Turns out its totally working. But it came without any hats or throttlegrips. So i designed a range of them and decided…
Basic face pack for the Loftyo figure based off WTMS's original design. Print Settings: Layer height: 0.2 mm or lower Supports: No Brim: If needed Additional notes: I like to scale to 101% for a slightly looser fit and easier assembly.…
Simplified on blender
Spent some time looking for hands that could hold weapons, then slimmed down the existing ones I found on the Lofty skin (remix source tab). UPDATE: I have found the hands on the Lofty skin are in fact stolen, I have provided the original…
The new loftyo armor mk2! i wasnt satisfied with the first model, so i upgraded it with cooler weapons, and more armor parts! of course upgrading some things aswell ;)
Instead of a 3mf file it's a stl file
Is your loftyo bored of being a regular figure? Well, not anymore! Now he can fly with a cool jetpack and he has Rocket launchers! A blade! Machine guns! And A cool helmet with custom faces! Photos soon!
Video Games - Metro 2033 - Artyom Alekseyevich Chyornyj - 2010 3D printable model.
a machine gun arm for the new loftyo figure
A full mashup of all my previous models. Includes everything to upgrade your Loftyo to the Underpaid/Overpaid Assistant, and more! Included: Underpaid Assistant Face Pack Overpaid Assistant Face Pack Buff Torso Display Stand w/ Ring Base…
so I made the stick figure so I could also make raxdflipnote
This cradle and tumbler was created so that I could code the function buttons on my velocity one controller for my XBox system with multiple button press capability to achieve 5 layers of function button options. The cradle sits next to…
Replacement cover stand for VelocityOne controller with three different angled slits. You can use it for tablet/phone and have some instruments on sight. Print as is in the file (standing on the edge) for better surface contour. Supports…
Giant anime swords are cool and all, but they're totally impractical for actual use and even just storage. Luckily, action figure scale blades aren't really heavy! This is also compatible with all of soozafone's 13 Series of figures,…
Don't throw away your flight yoke just because Turtle Beach won't send you replacement parts! This part replaces the primary shaft mount inside the main body of the flight yoke. My shaft could twist (it's not supposed to) and the problem…
To enhance the flying experience, I designed two new anatomical knobs for the Turtle Beach Velocityone Flightstick . Knob 3 has a longer shaft and makes throttle operation much easier. Comments and suggestions are welcome.
If youre missing a handrest for the Turtlebeach in either Left or Right, here is one that you can print without supports. You just need 2 M3 Screws of some sort, ideal would be M3x8, M3x10 or M3x12 (as all fit, and the thread is long…
Needed some face templates for the Loftyo (I'm bad at drawing XD), so I modeled some for the UDPA (Underpaid Assistant), since it's my favorite Loftyo model. Update Log 23/07/2026: Added new files for more detailed printing. Settings:…
Added tolerances, fixed some interference issues, fillets, sacrificial layers to eliminate a lot of support material needed, stuff like that. Should print better, cleaner, more accurately, and have better fitment off the printer w/o as…
I needed some more faces for my Garrett Loftyo, so I modeled some simple ones. Print Settings: Layer height: 0.2 mm or less Supports: No Brim: If needed Additional Notes: The model in the thumbnail is this one made by @supergood24. Happy…
Does your loftyo figure not stand or fly well now you can with the Loftyo stand. You print the stand and as many joints as you need to make your figure fly, stand, fight, or any other wakey thing. Please post your makes so I can see all…
the newest thing to be spit out by the What The Mutt Studios 3D Design Division, this is a face thing for the Loftyos! below is the link to the model in TinkerCAD so you can modify it. I wanted indentations to make coloring in the slicer…
a car for loftyos and also pls print in petg also heres original link https://makerworld.com/en/models/2294753-the-carboard#profileId-2504161
This is my version of Loftyos Sonic! hope you guys like him!!!!
his is a custom 3D-printed holder designed specifically for the Turtle Beach VelocityOne flight simulator setup. The holder is built to securely house a bearing and M5 screws, providing stability and functionality for your flight sim…
This is the latest creation for my VelocityOne controller for MS Flight Simulator. I created the knobs because it makes it easier for me to remember the assignments in my profiles. To print these you might need to cut the model to print…
Mighty Ohm Geiger Counter Enclosure This project was realized while streaming live at https://www.twitch.tv/chrisfigge. Years ago i bought a geiger counter kit at chaos communication congress . Time flew by and i forgot about it. A few…
Use countersunk M3x10 screws to connect the parts.
This is a 40-key ortholinear keyboard, intended for handwiring. Typing angle is 7°. Front height is about 16mm. All screws are screwed in from the bottom. After printing and assembling, i found that a Teensy 2.0 also fits the controller…
I bought a few Turtlebeach Flightsticks broken for quite cheap, because i think they look nice, dont have an app you need to install on windows (but you can use an android/iphone app to change deadzones, orientation, stick response and…
Changes: Added a top, back and sides to the original Loftyo head. Removed magnet slots. Images are of the Loftyo figure printed at 150% scale.
In a cruel twist of fate, and despite being packed in the original box inside another box with padding, Icelandair's baggage handlers managed to break my Turtle Beach VelocityOne Flight yoke. The part that broke on mine is pretty…
I modified the upper arm of an amazing stand for Dummy 13, now it fits the back socket of The Loftyo Figure. The rest of the pieces are the same. Print Settings: 0.2 mm or less layer height No supports I used PLA for this, though PETG is…
I just got the Turtle Beach VelocityOne Flightstick and find it way too stiff. So I've found some solutions online but none included 3D-printing … so I created these models. They need to be placed under the metal plate which holds the…
This set is dedicated to use with conversion frames like this item from AliExpress . If you have enough building volume you may print a single frame with mounting ears. My 235x235 building plate is too small to do it. This was a reason to…
The source marked this model as adult content.
I was searching for some accessories to mod for Loftyo, and I found this amazing design of a print-in-place backpack. Print Settings: Layer height: 0.2 or less Supports: On the ball joint only After printing, use a flat-ended screwdriver…
It's the Loftyo, but i fused some stuff and printed it at a 45 degree angle. That's it! Yeah, the original Loftyo Figure needed a lot of glue, so I decided to go ahead and model a glueless one, why not? The reason Loft Studios modeled the…
I made this frame to hold some aircraft data sheets so that the key information required while using flight simulator is “at hand”. It includes a PDF file with some partially complete data but this is a work in progress and will be for…
Remix of a MightyOhm Geiger counter case to add a hole for the potentiometer. The holes have also been enlarged to better show off the Geiger Muller tube.
this is an edited version of the Loftyos Figure to make it look like Tails!!!
Handy add on to hold a notepad Need to print and superglue the cover to the platen, and the platen to the clamp. Will require some trimming to get these to fit. UPDATE - added a version that sits horizontally.
I saw Loft Studios's video about the Loftyo variants, and I saw the Overpaid Assistant, which had a buff torso. At first I thought about asking Loft, but then I had time on my hands, so I made it myself. It's really simple, I didn't want…
So I was reading this series of books (Renegades by Marissa Meyer, https://openlibrary.org/books/OL26449505M/Renegades?mode=all ), when I came across this character called The Sentinel. I won't spoil much, in case you want to read for…
it fits on the head of the LOFTYO stick figure.
The second part of my Overpaid Assistant required shades and a grin, so I created this simple face pack that I colored to look like the Kickstarter Exclusive faces, though you can just color it normally with black instead of gold. Print…
Loftyo – Multi-Tube Missile Pod A multi-tube missile pod attachment inspired by the military mechs featured in the anime OBSOLETE . Designed specifically for the Loftyo figure, this attachment gives the model a heavier military appearance…
stikbot extension pack I will add more soon I will accept any request
Its a case for the Open Hardware Geiger Counter from MightyOhm Made out of 3mm Acrylic and some M5 and M3 bolts. Instructions Sandwich and bolts are all you need. Category: Other
Patyolat (Hungarian Laundry Company) original logo The logo is used nowdays with little differences. → See more at: http://www.patyolat.hu --- Resizeable: YES --- Original designer: Klára Bambera - Year: 1952
it's kind of based off of iron man's suit.
Mounting plate to work with the Thrustmaster TCA Airbus Desk Mount
Behold The Deadfrost Loftyo! I had so much fun making this and it turned out so awesome! I really love the loftyo figure and naturally I wanted to make my OC Deadfrost into a loftyo. I really hope you enjoy this figure, because I loved…
NO NEED FOR GLUE. There are little gaps that make the joints pop together without breaking it, I recommend using PETG.
This is a spacer block to suit a standard 18mm desktop there is also a Knob to take a stand 12mm Hex bolt for the Držák Turtle Beach VelocityOne FLIGHTSTICK The 3MF has a couple of modifiers to print 100% infill where the bol conacts the…
you will need parts from the base figure to make it you also will need this for the guitar
if there is any problems tell me and ill try to fix it
its the loftyo head but separate eyes its the repaired version cuz the original had the back socket upside down
springtrap loftyo, see og loftyo print for body(THIS ONLY COMES WITH THE FACE!!!)
![CadetYoke v2.0 [Open-Source Yoke for Flight Simulators]](https://media.printables.com/media/prints/68980/images/753650_9a34664b-1e5f-4f20-a71d-b6d279dcd5f2/large_display_20210520_19434253453453952_68980.jpg)
![CadetYoke [3D-printed Flight Simulator Yoke]](https://media.printables.com/media/prints/41552/images/412584_0078e221-ffed-4c21-9124-93d4c5dd3469/large_display_20200823_194155_41552.jpg)
