Counting matching models…
The shape of this hook is tuned to closely fit a Kala Soprano Ukelele, with just a little bit of wiggle. It may fit other ukeleles well too, but there is quite a bit of variation in uke neck sizes, so check the following measurements…
Original model by shooterhg on Thingiverse. This radius gauge makes it easier to measure your instrument neck. Measures 16", 15", 12", 10", 9.5" and 7.25-inch radiuses. There are 2 versions, with slotted and no slots. Print with 0.2mm…
A stand to show or store your mini guitar / ukelele. Great gift for people who like music and own an ukelele. No supports needed! Somthing like rubber stickers are needed where the ukelele stands at so it doesn't slide over the slippery…
Simple table top ukelele stand with supports to prevent instrument from toppling to the side. You may need to adjust the part size to fit your particular uke. Print settings used: Layer Height = 0.15 mm Wall Thickness = 1.0 mm Infill…
I needed something to hold my hex ukulele . It's not perfect, but it serves my purpose. I'm not great at designing things so this is a mashup of Tinkercad and Fusion 360.
A wall hanger for your ukelele
Printed with PLA, standing upright, with tree supports.
this piece is to hang your guitar or ukelele with a strap that goes arround arround your neck. It's tipically used with spanish guitars that a lot of times don't have the possibility to put a strap.
this should work just like a ukelele. please print and let me know if you have any issues as I am more than happy to fix them, comment if you have any questions, and please post your makes. this shouldn't need much hardware besides glue…
While the Hex ukelele model is awesome, I ran into some issues with layer adhesion where the bridge bolts are concerned. Tightening the strings to the point where the uke was almost in tune caused the bolts I printed originally to…
I used the neck model and drew some 3d curves, made some pipes, added a block, rounded some corners, and this was printed and put on my wall. I used #8 screws to mount it to my wall. I used 6 perimeters and organic supports, print time…
I wanted to mount my ukelele to the wall, but I can't drill into it. So I made this mount which used 4 3m command strips from costco.
This is a pice to hold your ukelele on a mic stand
Just a simple change to watzon's stronger bridge screw to change the screwdriver slot to vertical for less bridge printing.
Simple ukelele stand designed for Enya Nova U Concert but may fit other Nova U ukeleles from Enya.
I couldn't get a hold of the Ukelele tuners in the original design, so I altered the design to fit these very cheap Amazon Ukelele tuners instead…
An enclousure to hold a piezzo inside to be used as a contact microphone In order to pick up the sound as best as possible, it's important to print it with a 100% infill. For glueing the piezzo to the enclousure i also recomend to use a…
Ukelele hanger for IKEA Skadis panel.
I printed in PLA and pushed the thumbtacks through the plastic to mount.
Disclaimer : I AM NOT a luthier (craftsperson who makes and repairs stringed instruments) and this is probably NOT a very good repair. If your ukelele breaks, talk to somebody who knows about fixing instruments, not a computer scientist…
Simple Ukulele hanger Have a number of 2x2 (really 1.5 x 1.5) studs in the house. This hanger just wraps around the stud and with a bit of double-sided tape, has been securely holding 2 ukuleles for 2+ years now. Customize and enjoy…
eff created and shared quite a few ukulele models. His models not only print easy but sound good as well! https://www.printables.com/@Jeff_1895823/collections/3129725 Now while I enjoy my uke, not everyone is happy with my performance.…
