Counting matching models…
This sponge holder can hold up to three typical sized dish sponge in a vertical orientation. The sponge holder measures 90mm wide and 130mm deep. Each sponge slot can accommodate 30mm thick sponge. It is intended for use with an…
My mom wanted a way to dispense paper plates that got them off of her counter so I started searching for the existing options. I was inspired by the pop-a-plate but I wanted a single piece. It is designed for 9" paper plates but it…
This is a custom friction undermount for the Intel NUC (model D54250WYK) for under my desk to reduce clutter and keep cables off my desk as much as possible. The design is completely parametric so can be customized for other makes/models…
I made the holder a little beefier and smoothed out most of the sharp corners with filets. Printed on it back without supports
Work for K400 & K400+ keyboards. Flexible mounting options: wall, under desk or cabinet, angles, etc. Side rails allow for many possibilities. Holes for screws but I used double sided foam tape and that works great.
I have a small workshop with limited space, with all the little projects I like to do, i'm often using a computer for reference. To that end I've mounted a small screen on the wall, and mounted a laptop underneath my work surface. It's…
Simple friction fit under desk mount, I have an undermounted laser on mine so i added space to accommodate that. (my laser is the same width as the pistol but adds an extra 20mm under the barrel so take that into account for your lasers,…
Wanted to undermount the headphone DAC so I didn't have cords running over my desk.
FiiO K7 undermount with lip
Hey, This is an undermount i made for my macbook air. Category: 3D Printing
Designed to be mounted underneath a cabinet or shelf. I attached it with a few dabs of cyanoacrylate glue, but I'm sure magnets, hot glue, screws, tape, or whatever adhesive you lie would do the job. Depending on your printer, supports…
Designed a customizable parametric version of my Bessey Undermount Clamp storage brackets to produce various sizes as needed. The original was designed for a 100mm build plate but most people have larger build plates available. Everything…
Simple holder for various tapes. Needed this for my toolwall (see photos) but is also fine for mounting it under your desk or workbench. Print instructions Category: Tool Holders & Boxes Print Settings Printer Brand: Prusa Printer: I3…
Simple mirrored design to allow you to dry and store your cutting boards easily. Print instructions Mirror the part and print a left and right side. Print in orientation provided by 3mf file - vertically oriented - for maximum strength.…
My mom wanted a way to dispense paper plates so I designed: www.printables.com/model/417356/ That worked well in my RV and I was inspired by the pop-a-bowl to design a version of my paper plate dispenser that works for bowls. It is…
I needed a low profile solution to mount some Dyson V8 accessories below a cabinet. It has 3 countersunk screw holes for mounting. I printed it in Elegoo Black PLA, 3 walls, 25% infill.
This is a desk undermount for Acer's USB Hub 4 ports (model odk350). The two parts snap together, and are screwed into the desk. Notes Requires screws Print parts with the dovetail facing up (the part that looks like a puzzle piece facing…
Tired of reaching behind my monitor to insert my flash drive, I made this little mount to extend it front and center. I use it with this cable: https://www.amazon.com/gp/product/B01M1KAMGG The cable was held in-place while the back plate…
This will mount a Schiit Audio Hel Dac underneath a desk with four screws. the dac can be remove even after attaching through the front. The optional headphone hanger slides on the front but really should be much lower.
Printed in PETG, 0.6nozzle, 0.32 layer height.
Mount for the underside of a desk made for the CKLau 2 Port Displayport KVM switch. Print instructions Printed with PLA+ at 0.20mm with 3 perimeters. Attached to KVM with M3 machines screws and mounted to desk with #6 3/4" wood screws.…
Friction-fit, compliant space-saving mount for Craftsman V20 batteries. Mounts to generic wire rack organization systems found at most big box stores. Uses a new modular design to snap to the wires. Linked remixed model used for the…
Remix made to keep keyboard in holder when mounting vertically
Undermount or wall-mounted magazine holder for Sig Sauer P365 or P365XL. countersink sized for flat-head #6 x 3/4" screws (3.5 mm x 20 mm in metric) originally printed with PLA, "structural" preset dialed for snug fitment and quick…
Made with onshape: https://cad.onshape.com/documents/85c13eb537d2a782568db3d7/w/51a0e4a371d7a928b6a4da25/e/9ef5671bf466e1c00c72f6c4
Tissue Box (Kleenex square box) cabinet undermount bracket. Secured to cabinet with 3M VHB. Designed to allow the box to be slid in and then hook onto the front of the box. Please share your Make:) Like the freebie? Feel free to buy me a…
Just a quick remix of eoyilmaz's Ender3 pi enclosure with an undermounted 30mm fan I had for the pi. Bringing the cool air in from the gap underneath will helps to keep the whole enclosure a little cooler! Added version for using a…
We needed a hook to hang keys under a shelf. This mounts with mini 3M Command strips. 0.6mm nozzle, 0.3mm layer, PLA, Sovol SV01
underdesk mount for topping E50, use support for mount wing. screw it. It is mounted on the lower foot, and there is free space at the top, so you can lift it slightly without having to release the mount when you need to access the…
I’ve long dreamt of creating a drawer system that uses Gastronorm (GN) containers — the standardized stainless-steel pans used in commercial kitchens. They’re high-quality, precisely dimensioned containers built to the EN 631 standard ,…
Yet another hard to find drawer track bracket. Revised: 1/6/19 Print instructions Print Settings Printer Brand: Prusa Printer: i3 MK2.5 </div> Rafts: No Supports: Yes </div> Resolution: .20 Infill: 30% </div> Filament: Solutech PETG,ABS…
Yet another cabinet drawer support bracket for under mount tracks. Your track should look like the one pictured to work with this bracket. Print instructions Print Settings Printer Brand: Prusa Printer: i3 MK2.5 </div> Rafts: No Supports:…
Raspberry Pi casing which is big enough to slide in a Raspberry Pi which in it self is in a case already. Also, you do not have to disconnect the Pi from power or any connected USB devices to slide your Raspberry Pi in and out. To print…
This is a remix/rework/repurpose of seifer 's “ryobi jigsaw pad” (https://www.thingiverse.com/thing:3009765). Thank you for your great design. I printed it and it works flawlessly. I was looking for an easy mount to use under a table. I…
Designed this to get the hub off the top of my desk but allow it to be easily accessible. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: .28 Infill: 20% Filament:…
A simple undermount picatinny rail that fits onto the stock Knockout shell! Requires 6 toy/"nerf" screws to assemble. Order of assembly is shown in the photos! Written Steps: Open the blaster's shell and replace the original front piece…
Can be used to mount the original Sunlu S8 control board underneath the y-axis. Mounting holes are spaced at 113mm. I mounted my original board (configured with Klipper) to add more pins to my SKR 1.4 setup for additional thermistors and…
Edit 4.28.2020: I updated the part cooling fan duct, this moves the duct further away from the hotend, so it doesn't melt, gets it out of the way fo the wires, and also seems to improve the flow. If I say so myself, it also looks a heck…
Unknown brand. The locking tooth snapped off mine. For bathroom or kitchen drawer with undermount soft-close slides.
I've printed it in PETG with 0.6 nozzle, 0.32mm Layer height.
This design allows dual 5020 blower fans to be mounted on either side of the Hemera mounting points while mounting below the x-axis Exoslide system. The top mount features 2xm4 mounting holes, 20mm between centres to match the mounting…
We had a drawer in a cabinet that was pivoting side to side instead of straight in and out. When I took it out, I saw that it was meant to run along a center rail. The plastic guide was broken. 10 minutes of OpenSCAD later (and 17 minutes…
Hey everybody, This is a mount i made for a fitbit luxe. It's installed as an undermount, you can use a screw or double sided tape. Category: 3D Printing
I recently purchased a SodaStream to cut down on single-use cans, but ran into an issue with bottle storage. The SodaStream bottles are not a standard size, which has made it awkward to store in my cabinets, so I hopped on Printables and…
A simple bracket to allow you to mount your DROBO NAS device underneath your desk to save space.
Under desk mount for Mac Mini M4. Has side shelf as well that fits a unifi flex mini 2.5 GbE switch or external hard drives. Power button for m4 is accessible underneath and hole enables airflow. Have one of them NVMe docking stations…
Holder for headset that mounts under a desk or table. Mounts with a single small screw and can hold headset, wires, or other things.
I have an Ender 5 Pro which onto which I have installed a Biqu H2 direct drive. I have a custom spoolholder mounted midway up the frame which feeds the filament up through a reverse bowden setup. This bracket utilizes the old metal…
See below for the rails (and other drawer sizes)
This model was designed in Shapr3D. Printed in PETG (232/70 35mms), PLA (215/60 55mms)
These Brackets are designed to have ½" conduit inserted to both a front and back bracket making one side of a laptop rest for under a desk. The brackets are meant to be hot glued on the underside of a desk. Easy print, no supports required.
Shelf undermount holder for 5 sleeves of Nespresso, When user pulls out selected sleeve, the remaining ones stay in place due to friction. Backstop print is optional to provide uniform protrusion of sleeves. Print Settings Printer Brand:…
Fits remote for Yamaha AV Receiver RX-V2085 RX-A2080, RX-A3080. Can be mounted with sticky tape or 4x 6/23 screws (or equivalent).
Inspired by various PS5 controller mounts. Has a cable holder for magnet usb charging cable.
Undermount drill holder that fits DeWalt drills and drivers. Secures via 3mm countersunk screw hole.to underside of a workbench, desk, etc.
I need to attach a power supply under the Ypperlig table. There are 2 existing holes under the metal table frame that are unused, a set of holes on either end you can choose from. I used that to mount this attachment. The attachment can…
The stealthmount Out Front Mount ships with a GoPro flange so that you can mount an action camera or light underneath your mount. For the folks that really want to dial in their light mounting and make it as low profile as possible,…
UndermountAC is a DC powered minisplit air-conditioner used in RVs. The supplied manifold has a problem where it will spray water out the exhaust ports when the fan is set to anything higher than 'Low'. This manifold improves on the…
This design is a new variant of my previous design which allows me to mount an Accsoon wireless transmitter under my RED Komodo by replacing the back plate for the NPF battery (since I use the DC jack to power the unit anyway). You should…
Anker solix s2000 is the best possible UPS to use so figured id mount it on my desk have another one mounted under my server rack
Attach a webcam with a 1/4-20 mounting screw to the underside of a large-format display in a conference area for an eye-level view for your remote colleagues. You'll need a 12mm or 1/2" long 1/4-20 mounting screw and some VHB tape. There…
The stealthmount Out Front Mount ships with a GoPro flange so that you can mount an action camera or light underneath your mount. For the folks that really want to dial in their light mounting and make it as low profile as possible,…
UndermountAC is a DC powered minisplit air-conditioner used in RVs. The supplied manifold has a problem where it will spray water out the exhaust ports when the fan is set to anything higher than 'Low'. This manifold improves on the…
This is a desk undermount for Acer's USB Hub 4 ports (model odk350). The two parts snap together, and are screwed into the desk. Notes Requires screws Print parts with the dovetail facing up (the part that looks like a puzzle piece facing…
This is a slide out desk drawer than can be printed on a Ender3 size printer (you can find a larger CR10 size drawer here - https://www.thingiverse.com/thing:4102374 ). There is also a cable management clip which will allow a USB cable to…
This is a slide out desk drawer than can be printed on a CR10 size printer (an Ender3 size drawer remix can be found here - https://www.thingiverse.com/thing:4115043 ). There is also a cable management clip which will allow a USB cable to…
