615 models
Updated 05/18/2022 Added new 79x1 (in three fits) to support season 2 minatures Added new labels for Season 2 Updated Instructions for Season 2 Updated 03/28/2022 Added new medium fit files (see “Optimizing Fit” section below) Updated…
Please, share your print in the comments. Thank you!
Easy print with low infill, should work fine scaling up/down to any size. Glory, glory, Man United, Glory, glory, Man United, Glory, glory, Man United, As the Reds go marching on, on, on!
I wanted to create a model of each US state so that I could use them in future projects when needed. Additionally, I created an outline of the United States while working on this task. Here's a video I made about this mini project…
I wanted to print the Marines Emblem for my nephew but couldn't find exactly what I was looking for, so I made this. Print Settings Printer: Creality CR-10 Rafts: No Supports: No Resolution: .2 Infill: 100 Notes: If you want to do a 2…
The logo can be resized, but do not scale the Z-axis. Using pause at layer, the model can be printed in the following order (at 0.2mm layer height): Layer 1-2 = White Layer 3 = Black Layer 4-6 = Gold/Yellow Layer 7-8 = Red The logo can be…
Vertical card storage for character and villain cards for Season 1 and Season 2. Note: If you want a solution for storing your minatures see my other model: Marvel United Miniature Storage Card sleeves These trays have a 67.5mm wide card…
🇺🇸 Welcome to Washington D.C.! Continuing with the project of recreating the National Mall in Washington D.C. for the MiniWorld3D catalog, here is the Capitol Building , heavily remixed and improved by Dany Sánchez from the original…
Update: added a holder. 1/6/2025 The Peacocks! Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque. Yellow…
This project is a remix of the United Launch Alliance (ULA) upcoming Vulcan Centaur 561 rocket. The original rocket files can be found at…
https://www.youtube.com/watch?v=WCja15_Q6k4 imprimé sans supports Print instructions une seule passe
Emblem of the United Federation of Planets This is the emblem of the United Federation of Planets (UFP), as known from the various Star Trek series. The version used is the most common one, which I am aware of, and was typically used in…
Made this coaster for my father who proudly served in the United States Marine Corp. Printed in PLA .4mm nozzle with .1mm layer height Filament swaps at 2.1 mm from Red to Blue 2.4mm from Blue to White 2.7mm from White to Black 3.0mm from…
The Magpies! Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque. White till 5.2 Silver 5.4 - 5.6 Light Blue…
The Red Devils! Convex version, letters are raised and top layer. There is a concave version too. Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up for a…
For Christmas my dad asked that I make him things with my 3d printer. He is a former Marine so I thought I would put that insignia on some golf stuff for him. I got this from a 3d file of a ring, sliced it with netfab, cleaned it with…
Manchester United logo Category: Decor
Flag of the United States in 3D in multiple shapes . For 3d printing and coloring. Happy printing…!
This is remix of TShelley's amazing Marvel United Insert system. This covers how I fit Season 3 into the Kickstarter extras box. One issue is that Crimson Dynamo's base is 35mm instead of 30mm like most of the other minis. I modified the…
3cm x 5cm emblem of the Union Jack Flag.
Plastic stencil that consist of 1 piece map decoration template, which depicts the outline of the map of the United States in great detail. You can use it to decorate your walls, tote bags, clothes, etc. with paint brushes, sponges or…
I remixed the original design to hold Mojo (XLarge), Onslaught (Large), and Brood Queen (Large) in the Infinity Gauntlet box. It seems there is a lot of variance in the bases for Marvel united (I used the “Loose” trays and still up-sized…
Cookie cutter for Manchester United logo. The Arsenal is also on my Profile.
Silverstone Circuit, United Kingdom, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different…
🇺🇸 YIPPEE-KI-YAY! 🇺🇸 If you are American, a vexillologist, feel like every day is 4th of July, or simply don't know what to do with your color filaments, this Flag Coaster collection is for you! Check out my other flag models available !…
This Insert is an extension of tshelley’s excellent Marvel United Miniatures Box Insert and Penglord’s remix of that insert. I printed tshelley’s design almost as is (I printed the same token tray twice instead of one of each). I printed…
Printed mine on single extruder multi color mode, facing down. Use my 3mf for printing or as a guide. this video timestamp (21:30) could help you how to set up single extruder multicolor: If you plan to use stl's on MK3 you need to:…
With 2012 being the year of the London Olympics and the Queen's Diamond Jubilee, the Union Jack seemed an appropriate project to try out some multicoloured printing on my RepRapPro - single extruder - Huxley. RichRap's British Prusa…
A stackable storage solution for Marvel United Cardboard Locations & Villian Dashboards , as well as Plastic Tokens . Two sets (6 total boxes) can hold all the deluxe components from all 3 seasons. Add 6x3mm magnets to the box top & box…
Tried to a MUFC one for my friend based on this Liverpool design by Tong_G (559075). However the logo by CSD_Salzburg (1750326) did not print fused with the back correctly and had to use glue to stick. Printed flat with logo on the…
Circuit of the Americas, Austin, United States, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed…
United States Marine Corps Seal that I designed. It can be used as a going away gift or wall or desk art. I hope you enjoy!
A small keychain for everyone who adores the Red Devils. It can fit in any size ring of regular gauge steel ring. You can also attach it to your bag-pack or carabiner using just one single thread or rubber band loop. Imported from this…
I still need large mini storage (waiting for Witching Hour). Includes: Trays for Marvel United Season 3 - Multiverse Larger name plate for Crimson Dynamo Updated pet cages (4 standard pet cages and 1 Redwing cage as pictured) I used the…
Aktenvernichter Zahnrad / Shredder Gear Großes Zahnrad: 47 Zähne 45 mm durchmesser 12 mm breite kleines Zahnrad: 10 Zähne 16 mm durchmesser 12,5 mm breite Big gear: 47 teeth 45 mm diameter 12 mm wide small gear: 10 teeth 16 mm diameter…
◾ Size: 20cm / 7.9 inches in width, 20cm / 7.9 inches in height, and 0.3cm / 0.1inch in thickness. If you want to increase the size of the model, you can take it apart and print it separately. ◾ If you want to paint your model with a…
The Hammers! Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque Yellow till 5.2 White 5.4 - 6 Teal 6.2 -…
Model of football stadion Old Trafford Print Max layer high: 0.3 mm Infill: 15% Material: PETG, PLA
It's the logo of Manchester United
3 Colour ‘Filament Painting’ model - Manchester United logo badge (I recommend the following speed settings for the bambu with 0.04 layers, inner walls, outer walls and gap infill - 200mm/s, sparse infill, internal solid infill and top…
Contiguous United States Topographic Map Wall Art This is a ~50"x20" wall art map of the contiguous United States, modeled from self-processed real elevation data (original sourced from Viewfinder Panoramas ). I couldn't find an already…
There was some interest in having playtiles for the stagetop gaming table for marvel united. This is a v1 draft of a 4x4 version. I am working on a full 5x5 version, but I'm putting this up for testing right now. After I have this working…
Isle of Man TT Mountain Course, United Kingdom, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed…
About this Model Discover the beauty of the United States through an intricately detailed 3D topographic map, capturing the diverse landscapes that define the nation. From the towering peaks of the Rocky Mountains to the rolling hills of…
Yas Marina Circuit, Abu Dhabi, United Arab Emirates, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts…
Watkins Glen, Dix, United States, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different…
Topographic map of United Kingdom of Great Britain and Northern Ireland including streams and lakes and coastline. See https://ansonliu.com/maps/ for map scale and specifications. All my models are available for free on my website. This…
Marvel United insert *Requires cutting of the current insert The insert as is isn't very good for holding Sleeved cards and all the tokens in an organised way. I just used an x-acto knife to make the cut to the insert and the insert…
For best results and minimal layer lines, use a fine layer height (around 0.1–0.12 mm) and slower print speeds to capture small details—particularly in the face and hair. PLA or PETG both work well; PLA is often easier for beginners.…
Donington Park Circuit, United Kingdom, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
Printed in red then to white then to black PLA Category: Signs & Logos
Shredder Gear - 47 Teeth, Compatible with United Office UAVS 300 A1 This replacement gear is specifically designed for use in the United Office UAVS 300 A1 paper shredder. Featuring 47 teeth and a gear ratio of 47/10 , it ensures smooth…
white until 5mm light blue until 5.6 red until 6mm gold until 6.6mm gray until 7mm finish with black
Road Atlanta, Braselton, United States, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
This is a Topographic map of the island of Ireland.
🇬🇧 UNITED KINGDOM If you are a Briton, a Union Jack lover, a vexillologist, have international friends, or simply don't know what to do with your color filaments, this Flag Coasters collection is for you! Check out my other flag models…
I did not like the available insert, since they either did not utilize the vacuformed insert or had to remove it completely. Also, not all inserts where removable from the insert/box to use them on the table. So I made a new one. Or ..…
Make a filament change at 1mm height. Red and yellow are awesome but black and white also turn out to be amazing.
These are interlocking trays for the location cards in Marvel United . Other Versions There is also a version for laser-cutting . Category: Toy & Game Accessories
The AS-3018/WSC-l(V) Satellite Communications Antenna is part of the antenna group OE-82.
*Updated files to change “Phoenix Five” to “Fantastic Four”. .STL files to print a box that holds all cardboard locations from S1 and S2. There is also a label file that aligns with the locations for easy setup and organization. Please…
3D model of United States F1 track 2023 Scale to your desired scale and drop down the Y to get the desired height of the model.
Silverstone United Kingdom You can build a racing circuit in Silverstone using roads from the Racing Circuits - building kit . Here is a list of the parts and how many you will need: A1LRC - 5× A2CLRC - 4× A2LRC - 4× A3CLRC - 16× A3LRC -…
Easy 43-minute print that requires only 5,33g of filament
Brands Hatch, Fawkham, United Kingdom, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
I designed this to be printed in Multi-Color with pauses at a 0.2mm Layer Height. I print at 100% infill but lower is fine as well. For the first color change, pause at 1.4mm and if you want the border on top a different color, change at…
I have built this collection over years and gotten parts from many designers, including creating my own designs to reduce storage size. I believe I have linked every designer here, but if you feel that I missed you or another creator,…
The Red Devils! Concave version, letters are sunken. There is a convex version too. Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up for a plaque, I would keep…
Simple coaster with the United States Air Force Academy Logo (one of them anyways). Haven't tried any other materials.
Hollow Maps of Australia and USA Made with tracing the inside onto paper in mind. Size: (over 100mm wide) X 1mm thick. Can be resized in you slicer. Layers: 0.2mm or less.
I remixed @wheelrightmd_436291 design to combine the three large miniatures (Mojo, Onslaught, and Brood Queen) and the three sentinels holders in the Days of Future Past Box using the original files : Large_Mini_Holder_Smaller…
This is a Leeds United Whistle designed in Tinkercad. Prints without supports
Sonoma Raceway, Sears Point, United States, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in…
Inspired by a post I saw on facebook. This acts as a way to both display and organize the miniatures from Marvel United along with their character cards. Features: 1. Lip to hold cards in place 2. Hole for magnets to attach multiple…
red until 2.6mm finish with yellow
Token tray/holder for Marvel United X-men board game. Keeps all the tokens in place and separated. Printed using 15% lightning infill and 0.24 mm layer.
I removed the “extra” compartments from the locations bin and added a separator for the dashboards to hold the Sinister Six boards. I also created token trays to be placed in either the dashboard boxes (4 trays) or the location box (6…
MARVEL UNITED character & sleeve cards trays. Every tray has the name and a picture of the character. Remixed from https://www.thingiverse.com/thing:5395734 I will add trays for expansions soon. EXPANSIONS: Enter the Spider-verse:
With this pendant, you can show your partner your love and commitment. An ideal gift for Valentine's Day.
UNITED STATES NAVY COASTER (THANK YOU FOR YOUR SERVICE). IF YOU LIKE THIS COASTER PLEASE LIKE SUB AND FOLLOW. HOOYAH THANK YOU.
As the coaster I'd uploaded has been well received I've decided to upload a multi-color and large placemat. Sorry I know most folks might not have a printer with a large enough print volume to handle the size as is but you should be able…
This can be printed with a .4 nozzle. The plaque is designed to be printed with multiple colors, so color swap or an AMS system is recommended.
Manchester United FC shield with flexi legs. Find others shields in my collection https://www.printables.com/@PipodV3D_2293483/collections/1979805
USMC Coaster Set Marines Devildog Devil Dog United States Marine Corps 100mm With Holder
Hey Everyone, This is a simple multi-color print of the United States Post Office logo as a keychain for your mailbox key. I printed this on my Creality Ender-3 Pro Print Settings: 0.1mm Layer Height 0.4mm Nozzle 3 Perimeters
printed @25% infil no supports necessary 4 layer top and bottom
Goodwood Circuit, United Kingdom, on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different…
Hollow Maps of European Countries Made with tracing the inside onto paper in mind. Size: (over 100mm wide) X 1mm thick. Can be resized in you slicer. Layers: 0.2mm or less. Countries so far: UNITED KINGDOM, UKRAINE, CZECH REPUBLIC,…
Marvel United Season 3 card storage with support for the larger campaign cards.
This is a custom wall mount for the United Cutlery Hadhafang (The sword of Elrond/Arwen) from The Lord of the Rings. The sword originally comes with a stand but it's not meant to be wall mounted… so I made this instead :D Also included is…
This is a 3D scale replica of the United States, the state height corresponds to the number of electoral votes each state controls in a presidential election. I thought it could be a fun visual tool for learning about U.S. politics. Also…
Long Beach Street Circuit, USA on a stand with it's name. Race track 3x3 mm Stand 198x3x15 mm Gap for putting the track into the stand 0.1x0.1 mm bigger so it's easier to assemble. Looks best when separate parts printed in different color…
UNITED STATES AIR FORCE (RETIRED) LIGHTER SLEEVE FOR BIC LIGHTERS. IF YOU ENJOY THIS MODEL PLEASE LIKE AND SUB FOR MORE CONTENT. THANK YOU
As a huge MNUFC fan, I wanted to use the logo to create my first 3D piece. Created it using Adobe Illustrator to export the pieces as SVG, and then brought it in to Tinkercad to combine them in to a 3D logo.
