1,108 models
This is a remix of the pax storage case from thingiverse by maker giek2000 . I modified this case to include an insert for the pax charger, so the device can be charged while being stored, combining all accessories in one single neat…
I recently picked myself up an OmniVap XL and have been loving it, but I wasn't able to find any containers that I really liked for it. Inspired by some other knurled containers I saw on Thingiverse, I decided to try to design my own. I…
A 2x2 Gridfinity Stand to store Bottles with 21mm diameter, e.g. Vape Liquids with 10ml.
m3f included with all parts ready to print and suggested supports. Should all fit together if your printer is fairly accurate.
Při každém odvápnění kávovaru jsem řešil problém s umístěním vhodné nádoby, proto jsem navrhl tento model a nemusím řešit podkladání hrnce. Nádoba je vytíštěna z ASA, tento materiál lehce vydrží teplotu vody při čištění kávovaru. Při…
27mm Width. 16mm Depth. 7mm radius. 30mm Tall Printed with Sunlu pla meta. 3 walls 20% infill No support needed.
This basic roman column container measures 34.8 mm x 40 mm and is 56 mm high. You can use it as a stand to add importance to any small object, as a container, or as the start for a miniature Vaporwave party. The lid and the bottom of the…
I made a custom Vape Pen that looks like it could be real, to be able to smugle a usb stick with you. I would print the cap without support, as this is relatively difficult to remove. Also, I would advise to print with 100% infill,…
add something later here =)
Závesný odkvapkávač pre príbor.
A loading tray for six of the STAINLESS STEEL DOSING CAPSULES (.3G) sold by DaVinci.
Läskstångshållare – Perfekt för ditt NOR-LYX vapenskåp Denna praktiska läskstångshållare passar alla NOR-LYX vapenskåp och är fastskruvad med två skruvar, vilket innebär att den sitter stadigt på plats och inte kan ramla av. Till skillnad…
Greg wanted a Vape Cartridge holder. We designed one together. It is simple. This fits 4 circular and 2 oval I have included the sliced GCode as well as BGcode
Print and push-fit into place, or use as the basis for other uses for these often discarded vape devices. I dislike seeing these “disposable” devices thrown on the ground or into the trash and often pick them up as they contain a…
Vaporesso XROS 3 Series Drip Tip This is a remix of a model made by CHAOSXSPIRIT that can be found here. I have changed the drip tips design by making it smaller so it prints faster, is more comfortable, and uses less filament. I have…
High poly version - https://social.thangs.com/m/220439 Category: Toy & Game Accessories
Original part : https://www.myminifactory.com/object/3d-print-vaporeon-pokemon-120325
More design on: https://www.patreon.com/c/mortex3d PATREON: Mortex.3d INSTAGRAM: Mortex.3d
Big Eeveelution fan? Looking for the whole set of 9 models? Find the rest of them over on my Patreon ! Or Show your support by buying me a coffee ! So which eeveelution is your favorite? I personally think Jolteon, but that's just because…
A large, solid stand for the STORZ & BICKEL Mighty+ vaporizer. Flared towards the bottom for stability. Around 54g when printed with 100% and around 35 with 20% infill . You may have to scale it to 100.5% - 101% in your slicer for an…
Honeycomb Vape Pen Stand and Cartridge Storage These are pen holder stands for vape pens and cartridges. Standing the pens upright keeps the oil at the bottom where the heating coil is and it also seems to help reduce clogging. They're a…
Another take at a working tip replacement for a Vaporesso XROS series pod. Printed as is, tip down, and with a brim. Might need post processing to smooth sharp corners. (Fixed this on the current version v4) Lemme know if this works for…
Geekvape Aegis legend 2 510 connector repair
Inspired by Parkzone and Eflite's Vapor, decided to design a smaller Vapor with a wingspan of 25cm as my first 3d printed RC plane project. It does not take long to print and build this as it is a simple design. This is version 1 and it…
Low Poly Vaporeon model by r0ck3tman93 I printed with the following settings: 0.16mm layer height 3 walls 20% infill tree supports: placement everywhere 40° overhang angle bed temp 50° -0.1mm first layer horizontal expansion Give it a…
Soccer Boots - Nike Style Mercurial Vapor. This is the original design of Mercurial Vapor but without Nike logo.
This is an ashtray I made to use with my Arizer Extreme Q vaporizer. The holes can fit a ton of different tools, but I use mine to hold things like a 510 battery, some extra pokers and a brush, and a lighter. Also included is a rolling…
Vapor blasting is perfect for precise cleaning of aluminium parts without damaging the surface! Designed to work with 220l / 58 gallon barrels with outer diameter +- 590 mm / 23 inches, I chose plastic for its corrosion resistance. Parts…
For Vaporesso XROS Standard and Mini. Same pod. Just chuck it at your printer and go. Got no time for it. Maybe will polish it up a bit later.
If you use medical vaporizers, you'll have been struggling to keep the little buggers standing up when you are not using them. I finally got annoyed enough to make this simple stand. The extension of the foot was because I wanted to…
A 2-in-1 device. Allows you to fill the chamber of your vaporizer with the funnel, and/or press a strong and dense pellet. Normally, due to the low density, a small amount of 0,10 g would totally overfill the chamber, leading to muted…
If you download the model, please don't forget to leave a like. Thank you! <3 Dive into the elegant world of Vaporeon with this low poly geometric 3D print. The design captures the aquatic Pokémon's graceful and fluid nature with sharp,…
English I made this model for my Vaporesso LUXE XR MAX there is a slot to slide the usb C cable inside, for the cable I used a usb C fast charge from Xiaomi (it is possible that it is a little bigger than the ordinary ones) you can pass…
use pwm chip ne555,cantact me to more information
A friend of mine asked me to create a simple holder for disposable vapes like Elfbar. To keep it compatible with brands i maybe don't know i left some space in diameter. Design keeps the mouthpiece far away from the actual vent to prevent…
No more dropping your vape and having your battery break off and fly across the floor! Print settings: layer height 0.28mm, no supports, 3 walls The bridge on the top of the window is a bit long, so it might droop. I hit it with a torch…
This is a smaller and cheaper replacement for the original filling system, see https://storz-bickel.com/en-us/filling-set-for-40-dosing-capsules I recomment to iron the upside of the hole-plate. 2023-08-25 Update: Fixed “Druckplatte.stl”…
toothbrush cup with movable evaporating bottom; protects the brushes from standing in water and blackening; holds 5 toothbrushes and two toothpastes comfortably, buttom square 6 x 6 cm, upper square 7 x 7 cm, height 10 cm;
Features Snug-fit cylinder that securely stores your DynaVap vaporizer without wiggle room. Dual-well storage system to keep both fresh herb and AVB under wraps with a single omni-directional lid. Does not require an expensive…
This stand will fit snugly on common vape batteries that measure 14mm in diameter. Keep your vape from falling over when you set it down. Print instructions Print Settings Printer Brand: Prusa Printer: I3 MK3S </div> Rafts: No Supports:…
A single tool to open every type of bottle. There are 3 GIFs that explain how to use it! For small bottles, use the loop; just slide it over the narrow part, and once you reach the bottom, just pull. For large bottles, use it like a…
This model is a sleeve/case designed for the Vaporesso XROS 3 Mini vape. There are openings for airflow, charging port and LED. Printed on my Ender 3 V2 with 0.28 Layer height and 0.5mm line width. Tollerance is thight but works for me.
Mk1 Vape cell holder as seen in the video, designed to take "ELF BAR" cells, please use for your own projects and ideas. Please use in your own projects and remix the models to your hearts content Please show your makes and tag me in them…
Preview: https://a360.co/33JV6Sk Required parts: Source V3 M10 BF Squonk 510 Connector (22x1mm) Goldilocks 7.15ml Silicone Squonk Bottle Solid Copper or Solid Silver Contact for Mods – Top (10mm 18xxx) Solid Copper or Solid Silver Mod…
This is a tool for trimming your vape coil legs. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.16 Infill: 25% Filament: Polymaker Polyflex TPU Black Category: Hand Tools
This is another model from my Vapor's World collection . Protection for Geekvape Zeus Subohm Tank. If the mod accidentally tips over, there is a high risk that the glass tank will break. This protection prevents that. No support required.…
Designed for 12x60mm or 74mm carts. If you need a different size, just leave a comment. 0.25mm tolerance, 0.375mm crush fitting. Lady: 17in thigh circumference Gent: 24in thigh circumference If you're unsure which one to go with, just go…
Bandırma Vapuru , Atatürk ve silah arkadaşlarının kurtuluş mücadelesi başlattığı yer olan Samsun'a gitmek için kullandığı gemidir. This ship is a statue for modern day Turkey. Instructions 3D Warehouse'daki bir Bandırma Vapuru çalışması…
Tatooine Moisture Vaporator
This is another model from my Vapor's World collection . The stand prevents accidental tipping of the mod. No support required. I am looking forward to your Makes! :-) If you like this model, feel free to check out my others here .
Perfect stand for your Vape. It fits for many different Types (Caliburn, Oxva, …). The modle is easy to print and don‘t need any support. Printing: I printed with a 0.4 nozzle, a layerhight of 0.2mm and infill of 15%.
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
A Tank replacement for the Geekvape made out of PETG. I"m using it for a year now. depending on your printer you might scale it in Z achsis about 1% or so. the fiddeling between its to large, and you don't get it in, and its to loose and…
One of my first self made models. I was in need of a solid stand for my display case and this is the result of it. Print instructions: Layer height: 0.24mm-0.28mm Infill: 12-15% gyroid (rectangular/grid should work fine too)…
Turns a pickle jar into a filtering water diffuser for hookah or vaporizers. It attempts to split air bubbles up as much as possible to accomplish better diffusion than many other options I have seen. A gasket printed in TPU will likely…
A simple stand for the STORZ & BICKEL Mighty+ vaporizer. Slightly flared towards the bottom for increased stability. Includes a rather large cut-out for the USB-C port to accommodate even the thickest plugs. Available in single-direction…
Designed for 11.5mm pens. Contoured for easy grip and carrying.
Adapter to use a Dynavap model M with a 14mm water bong. Print with a semi hard TPU to allow the vape to snap into the adapter and form a decent seal. The hole in the adapter can be aligned with the carb to function as a normal, or rotate…
Zum befüllen der Dosierkapsel wird der Trichter drüber gestülpt. Keine Stützstruktur nötig. Bei Bedarf den Trichter innen mit feinem Schleifpapier schleifen. The funnel is placed over the dosing capsule to fill it. No support structure…
lost my tip and made a new one so you don't have to. best on a resin printer but probably print on any style printer. you will need o-rings for the base it is designed for them like the original. all files included so you can mod it as…
I decided to make some replacement panels for my Centaurus M100 to give it some character. I made a blank and some customized panels. Feel free to remix it with any design you want. The cutout with the design should be 0.4mm deep if it…
Have Fun EDIT: Added a v2 with tighter tolerances. Category: Organization
DIY Power bank from recycled vape batteries. I've used 5 batteries from a rechargeable vape. Each battery has a 650mAh capacity, so the total is approx 3250mAh. It charges most modern phones to above 65% from 0%. USB Charge Power Bank…
Have fun! UPDATE: Added version 3. Would recommend to print this version. Print Settings Printer: I3 Mega Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 20% Category: Replacement Parts
Vapor-lock resistant funnels feature three outer channels that release air during pouring, stopping splashback and flow.
This canteen is designed to hold a 80mm ecig battery and 62mm or 52mm carts Join my patreon to sell this commercially! https://www.patreon.com/mozWORLD
Works great with Dynavap and G Pen products.
Panely pro Vandy Vape Pulse AIO V2. díry jsou přizbůsobeny pro magnety o průměru 3mm a výšce 2mm. V modelu jsou díry s tolerancí 0,2mm. Magnety jsou poté zalepeny lepidlem. Na některých panelech byla přidána 0,4mm vrstva obrázku a výměna…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Hi 3D printing friends! This is another holder design but made for the Vuse Vape to help organize your desk. It is meant to hold 3 full devices, the right most spot is built to hold the charger (press fit), and the front 3 spots are for…
A Drip Tip for the Geekvape Zeus Atomizer Print Settings Printer: Creality Ender 3 Rafts: No Supports: No Resolution: 0,1-0,2 Infill: min Notes: Print upside Down to avoid using Support Category: Other
These are cups designed to test the properties of polymer plastic films. I use it to test the moisture barrier performance of biofilms. The cups are filled with either water (or dessicant), and the sample loaded in between the gaskets and…
Original description Simple Skoda Octavia 1 cupholder for 2 500ml cans. Doporučuji ze spod přilepit pomocí tavné pistole nebo siliconu. My desc Originally, I made this edit for my friend, but many of you asked for it and where you could…
This is a vaporesso cap for pods MTL and RDL. I have the two models (RDL AND MTL) and it works great in both but in RDL is more tight. I printed in TPU and PLA (the images are in TPU) and it looks great in both, but in tpu filament it's…
All i did to the existing model is add a chamfer under the fins that lock the funnel in place. Well, actually a chamfer didn't work in OnShape. I sketched the ‘chamfer’ at either ends of the fins and used a loft with a path to follow the…
Demo and assembly guide: https://youtu.be/9Cofmy4bZX4 3d View: https://skfb.ly/6KoX8 Added a balloon remote for it: https://www.thingiverse.com/thing:3675568 If you like how it works, you can support me by purchasing one of these body…
This is another model from my Vapor's World collection . This belt holder for Geekvape Aegis Legend 2 is a practical solution for hands-free convenience while keeping your vape device secure and close at hand. Fits belts up to 40mm wide…
A Vapour Snake. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
810 vape mouthpiece with groove for one seal. Fits perfectly in Smok TV12 atomizer. Printed using PLA with 15% infill.
A small tray, holds Luster pods, 510 cartridges and a CCell Palm vape.
Please comment, rate, and post a make! This is a case and dock for the Vaporesso Xros 3 vape. The case is friction fit and will need a little encouragement the first time you slip it on. The dock has a hole for inserting the USB cable…
Replacement vaporizer head for NE-C28P, 3D design thanks to Mervin
I just wanted to design and 3d print a squonker with an "unconventional" layout and it turned out better than I expected! Parts Needed: x3 screws for the dna chipset x1 screw for the circuit cover some foam to put between the board and…
There are spots to hold the battery, cartridge, and charger. I tested the fit with four combos of manufacturer and they all worked, but your mileage may vary. I printed in PETG to take advantage of the flexibility for the closure. .f3d…
GIF since the photo doesn't do it justice: https://gfycat.com/accuratejointbronco I designed this great-looking low-poly coaster to demonstrate how you can use PrusaSlicer's built-in features to turn a solid object into something amazing.…
These files are easy to print and in my opinion, they look great too. Options: Single (for 1 atomizer) Triple (for 3 atomizers) If you would like me to edit something just send me a message ;)
Protect your Dynavap M7XL (or any M model with the XL condenser). Fits anything around 109mm long. Always appreciate feedback and reviews! Would be great to see a picture of a build! Hope you enjoy
Alternative version of my stand for OXVA Xlim Pro 2 Vape Pen + Cartridge + Small Liquid Bottle ( https://www.printables.com/model/1068557-stand-holder-for-oxva-xlim-pro-2-vape-pen-cartridg ) One isn't necessarily better than the other,…
A new design, now you can open easily a several model of bottles. You have to use as a common bottle opener. Insert the tooth into the appropriate recess and then lever it on the bottle. (As you can see in the photos) If you print this,…
I saw the original file for this as a normal desk organizer/pen holder, and I modified it to hold some of my vape carts. I printed it in Matterhackers Quantum Blue/Green PLA at 0.12mm for some fine detail
il primo driptip per la sigaretta kiwi fatto dalla DYNAMICS
print with tree support, 0.2mm and 70mm/s
This is a Hueforge STL of an Eevee/Vaporeon Evolution I found on the internet that I liked. I take no ownership claims of the artwork itself. I just ran it through Hueforge to get the STL and instructions. Print at 100% infill with a…
This is a 7 piece set that includes the Main body, 5 adapters, and a Vestratto Anvil Vaporizer. It is for display only and completely non functional. Makes for a great desk piece. I printed it solid in resin, you could certainly try…
The Mk2 of the vape cell pack Packages 35 Cells in a more compact enclosure with a simplified assembly process An iteration on the first pack design with the primary goal of making the end product more compact, lighter and aesthetically…
A Drip Tip for Geekvape Blitzen. Printed mine in 0.08 Category: Other
Included a slit for placing an o-ring if needed, I used teflon tape to make a seal, but it works fine without one. Orientate the tip towards the printing bed + add build plate adhesion, no supports necessary
