Counting matching models…
RatRig V-Core3 without enclosure: Led mount Dayspring RatRig VCore 3 LED by Vector3d da Jake90 | Scarica il modello STL gratuito | Printables.com BOM: 2x sup_led_enc (1).stl 2x sup_led_enc (2).stl 4x cap head screw M6x12 4x Tnut m6 3030…
Support Dayspring RatRig LED by Vector3d BOM: 4x cap head screw M6x12 4x Tnut m6 3030 4x heatinsert M3 4x M3x6/8 you can buy it here: Dayspring RatRig LED - Vector 3D Download: led.cfg klipperscreen.conf printer.cfg…
These are the XY Joiners made by Vector3D https://github.com/AdamV3D/V-Core-3-Vector3DEdition/tree/main/Printer combined with the clamping mod of MFBS. https://www.thingiverse.com/thing:4947482 I changed the hole size back to 5mm and…
Bracket for 3030 profiles to mount the Daylight/Daybreak lighting at a 45 degree angle. M6 12mm screw for profile mounting with T-nut. M3 Heatinsert for mounting the lighting - length almost does not matter. Mine had a length of 5mm and a…
This is a remix of Vector3d's VLMP soldering iron holder. I found the basic holder kept pushing the soldering iron out of the holder when I applied downward pressure. This adds adjustable screws to increase the tension. You will need the…
I really liked the model by Jevermeister , but it is for the 3.0 version. I combined that with the 3.1 version of the original mod, using TinkerCad. It has some rough spots, but works. I like that the spacers are not used and that it…
I purchased Victor3D's VLMP Heat Set Insert Press Kit and I'm using it with a Weller WESD51 soldering iron. My use of the soldering iron is not exclusive for pressing heat set inserts, so I made a small cable management clip that allows…
I wanted a diffuser for the daybreak neo leds I had on my trident 250 the original file was too short so I adjusted the file to suit the vector3d daybreak neo led strip.
Love Vector 3Ds threaded insert press but wanted a stand to hold it with parts trays for the inserts and having a stable base to work with. trays inner walls are all curved into the center so you arent digging in the corners for the…
A simple modification of the RainbowShift case from Vector3D to add in place a DC barrel jack connector, to make wiring / powering easier. RainbowShift can be purchased directory from https://vector3d.co.uk/product/rainbowshift The DC…
The Daybreak has a different diffusion system, which my ptfe was hitting. This diffusion bar is much better in that regard. I had to remix because the screw was at the wrong spot. I created 3 versions: 2mm thickness (original) 0.6mm…
This is my LED Daylight Holder to mount it under the extrusion for my RatRig VCore4, but it could also used for other printer like Voron and so on. I used the Vector3D LED Stripe. I made and used it for my V-Core 4 with full closed…
I recently assembled a VLMP 2 Heat Set Insert Press Kit from Vector3D I'm using my bench Hakko 888D soldering iron so will not be mounting it permanently with the wire zip-tied in place, and was inspired by the clips made by @Siff3D for…
This is a remix of the Easy Custom EMS Mounts sized for the Vector3D RainbowShift Board to be mounted using FT EMS.
This is my LED Daylight Holder to mount it under the extrusion for my RatRig VCore4, but it could also used for other printer like Voron and so on. I used the Vector3D LED Stripe. I made and used it for my V-Core 4 with full closed…
This is a remix of the Easy Custom EMS Mounts sized for the Vector3D RainbowShift Board to be mounted using FT EMS.
