Counting matching models…
Golden Rite" is a striking half-face Venetian mask inspired by ancient rituals and the mystique of traditional masked balls. Its asymmetric silhouette combined with a radiant golden surface creates an aura of noble elegance. The swirling…
Do you have ball cord driven Venetian blinds and do you want them automated? This project is direct drive approach with low cost stepper motor. Print instructions I have many windows with ISSO style venetian blinds (type with ball chain…
My wife loves Halloween and dressing up. She has acquired many Venetian masquerade masks and needed a way to store and display them. So, I came up with a simple display holder that holds the mask through the eye slits. In addition there…
Exactly what it says on the tin. Version without included supports to be uploaded later.
I had to replace an old small aluminium venetian blind and found an inexpensive replacement at a local store (The Range), but when trying to fit it I found that the mounting brackets supplied would only fit to the top or the outside edge…
Rollo, Jalousie, Plissee, Kettenstopper für Kettenschnur mit dem Kugeldurchmesser von 4,5mm. Aufgrund verschiedener Abstände kann dieser Kettenstopper vermutlich an alle gänigen Modelle montiert werden. Damit bleibt die gewünschte…
Exactly what it says on the tin. (ignore photos, didn't want to take cad photos. For cad photos, please refer the other)
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre A romantic Venetian Gondola Miniature, printed on the…
Replacement box bracket for Venetian blinds. For a 25mm high by 26mm deep box section at the top of the blind. Made in onshape:…
My original clips broke, and printing replacements was cheaper than OEM replacements + shipping! I printed in PETG. PLA or any other rigid plastic should be fine as well. No supports needed.
Venetian Harlequin King, mask, cosplay, wearable, costume, face, helmet Quick 3D | Professional & Free 🚀 I keep my designs free for everyone to enjoy. If my work adds value to your day, please consider a small donation. ☕ Support here:…
A set of gears to multiply the range of a standard servo -- a Turnigy 1501MG in this case, probably overkill -- to tilt the slats of a wooden venetian blind. Direct drive wasn't enough to get the full range of motion out of this blind.…
<english> Venetian blinds, control rod holder. </english> <finnish> Sälekaihdin, säätötangon pidike. </finnish> Used white PLA with 0.1mm layers and looks pretty nice.
Venetian Rose Duchess, mask, cosplay, wearable, costume, face, helmet Quick 3D | Professional & Free 🚀 I keep my designs free for everyone to enjoy. If my work adds value to your day, please consider a small donation. ☕ Support here:…
Venetian Mask Low Poly Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d ) More Masks: https://www.printables.com/@StudioMechanik/collections/3148106
Mounts for attaching stepper/servo motors to venetian blinds in order to automate the tilt (open/close) of the blinds. Motors are connected to an ESP8266 running ESPHome. Code files are also available for both. The code is not perfect,…
Simple replace for broken one Category: Household
Added 1.5mm to the length to fit my blinds perfectly
On all of my VELUX Venetian blinds, this piece broke. This is a replacement part as I didn't find anything else. It's a bit loose to allow easier replacement.
My side covers for venetian blinds are broken so I made a quick replacement. My windows are facing south - recommended to print in PETG.
My grandma was always very angry, what garbage blind holders she's buying. They get weak after small time, so i wanted to help her out. I used PLA, with 0.12. Each one takes around 10 minutes printing time.
This is a replacement clip to mount 2.5" valences commonly found on 2" vinyl, wood and faux wood Venetian blinds. This replaces the factory clips that get old and brittle with exposure to sunlight. I printed these with clear ABS filament.…
Command the room and show your fierce side with this unique masquerade mask, masterfully blending the raw power of a roaring tiger with the theatrical elegance of Venetian Baroque art. Intricate flame-like scrolls and ornate textures…
Does not need supports. Printed with PLA. Looks like original ones. Adjusting rod snaps in but isn't held tightly and can be operated easily.
Royal Venetian Peacock, mask, cosplay, wearable, costume, face, helmet Quick 3D | Professional & Free 🚀 I keep my designs free for everyone to enjoy. If my work adds value to your day, please consider a small donation. ☕ Support here:…
Shadow Assassin Venetian, mask, cosplay, wearable, costume, face, helmet Quick 3D | Professional & Free 🚀 I keep my designs free for everyone to enjoy. If my work adds value to your day, please consider a small donation. ☕ Support here:…
There are several venetian blind valence clips on Thingiverse, unfortunately they didn't fit or it was unclear what size blind they were for. 25mm is the width of my blinds - the clear plastic clip is the original/broken one, the white…
The valence cover clips for my Venetian blinds kept breaking off when something bumps against it ow with heavy curtains snagging. Similar to this…
A lightweight Venetian-style masquerade mask designed for children's faces, suitable for costume parties, cosplay and school plays. Scale it up in your slicer for an adult-sized version. The model is designed to print with minimal supports.
It suits a 50mm (2") wide head rail with cloth tilt mechanism. Can be improved because it may break on the same spots as the original (like i said, its just a replica). NOT TESTED
Venetian Tic-Tac-Toe 🎭 Venetian Tic-Tac-Toe is an elegant take on the classic game, inspired by the artistic and architectural beauty of Venice. Designed to be both a playable game and a decorative piece , it combines a refined appearance…
Mounting a Venetian blind with horizontal screws into a uPVC window frame. The blind's included end-brackets, on their own, aren't ideal for this purpose. Adding these printed braces makes for a stronger and more rigid fix. Hardware Blind…
I bought a few venetian blinds for my windows and some of them didn't have the “no-drill” brackets to install them, so ended up printing one. It works for almost every type of blinds/shutter and has been tested with length of 1.5m and a…
Simple model valance clips. Fits Hunter-Douglas but may work for others. Printed using 0.3mm. Enjoy!
Replacement valence clips for my Nien Made Venetian blinds, since the originals were sagging badly, and one had outright broken. This was purchased at a Walmart years ago and I don't have the exact model number handy; just the original…
If the tilt mechanism on the blinds stops working this could be the solution. The plastic part of the tilt mechanism that the cord winds around can break easily. In my case the axel from the metal part had rounded out the tube in the…
This Knob was created out of necessity when the original wooden knobs kept breaking. best printed in ABS or similar, as it may be in direct sunlight
On my Venetian Blind (Innenjalousie) the bottom part that holds the string to the bottom-most rail broke. This replaces it. You may need to widen the top hole where the string goes through.
Spare part for electric windows external blinds. The ring was defective in my outside blinds and you can't get it as a spare part. Print Settings Printer: VORON V2.1 Rafts: No Supports: No Resolution: 0,2 Infill: 40% Filament: ESUN ABS+…
A new 3D figurine generated by AI, a Chibi Venetian Gondola. I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small formats, and the quality of the…
I do not know if anyone has this annoying problem with windows that tip to open... when the window is tipped, it becomes impossible to close it without you fingers getting caught in the vanes of the blind.So you must always use two hands…
Venetian ornate mask Low Poly Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d ) More Masks: https://www.printables.com/@StudioMechanik/collections/3148106
Venetian Mask Low Poly Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d ) More Masks: https://www.printables.com/@StudioMechanik/collections/3148106
I do not know if anyone has this annoying problem with windows that tip to open... when the window is tipped, it becomes impossible to close it without you fingers getting caught in the vanes of the blind.So you must always use two hands…
A little replacement knob for my venetian blinds. Swedish style.
Problem A door-mounted Venetian blind is just wide enough to cover the glass pane, yet when the door opens (inwards), the blind would strike the sidewall of the door aperture. Solution The blind is mounted on special brackets with a…
All you need is M4 screws and nuts. Adjust the tilt of your mask or photo, then tighten the screw.
I went to Venice and bought a tapestry. The curtain rod mounts at the hardware store were ugly, so I printed some. Idea to object in about 2 hours, thanks largely to the high-quality lion object! Instructions Print! The screwholes are…
A friend's venetian blind was broken: no more handle. I made a new handle by printing a hook and end cap for an 8mm wooden dowel. Feel free to use this printfile, or alter the dimensions in OpenSCAD and export your own STL for any width…
The originals had all aged and become brittle, the slots to secure the strings failed. This re-deisgn is much tougher. Orient the print on the face as shown in the screenshot if importing it into your slicer isn't corect. You will need…
This is a compact and practical 3D printable cord holder for traditional venetian blinds , commonly found in older windows. It keeps the blind cords neatly wrapped around the T-shaped top, improving safety, reducing clutter, and…
I suggest one of the mask options for the Venetian carnival. You can scale the model if necessary.
Venetian ornate mask Low Poly Powered by MakerWorld-Image-to-3D ( https://makerworld.com/makerlab/imageTo3d ) More Masks: https://www.printables.com/@StudioMechanik/collections/3148106
This is least for Tiivi windows. Main shaft gear (yarn goes through) to tilt the blinds.
Náhradné plastové koncovky pre horný profil horizontálnych žalúzií (L+P sada). Tento model je navrhnutý ako priama náhrada za pôvodné krytky, ktoré často vplyvom slnka krehnú a praskajú. Balenie obsahuje obe verzie - ľavú aj pravú stranu.…
Venetian Butterfly Queen, mask, cosplay, wearable, costume, face, helmet Quick 3D | Professional & Free 🚀 I keep my designs free for everyone to enjoy. If my work adds value to your day, please consider a small donation. ☕ Support here:…
The design was created from scratch based on the functionality of the original hardware. The rotating cap allows the guide wire to be tensioned and securely locked in place, keeping the blinds close to the window frame and preventing…
Inspired by Baroque art and Venetian masks 3MF file: 2-color print-ready version (silver base + gold details). STL file: Single-color version (ideal for printing followed by hand-painting). Scale: Full size (1:1). Dimensions: Inner width…
Venetian Blind Rod End to replace broken piece. 2 sizes. Or scale as needed. A simple little piece that is pretty important. I thought if I needed two, others might also. I printed in PETG to check size and then printed in clear nylon for…
Settings: Resolution: 0,1 - 0,2 mm Filament material: PLA, PET-G, ABS Filament color: White I recommend using supports.
I have a unknown brand of venetian window blind with clips like these to fix it to the wall. Print Settings Printer: Hictop 3DP-11-ATL / Ender 3 S1 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 50 Filament brand: Eryone Silk…
These are for 2" faux wood blinds Made in two parts so the you can get them in easier and can glue them once in place, also have a combined version Update #2 moves the roller support towards the center and is a little beefier
This print allows you to make a 20mm mark on a slimline (25mm) Venetian Blind blade which you can use to cut with scissors. (My window opening was not quite as wide as the stock 750mm wide blind and I needed to take 20mm of each end of a…
This is a modular, parameterized, snap-fit rod system for a Venetian window blind rod. Modular snap-fit These are the parts that you can use to make your window blind rod: Hook end: The top of this part connects to the hook on your…
If you broke your holder for venetian blind, you can download my file and use it. Hope it will help :)
A little replacement knob for my venetian blinds. Swedish style.
This model provides a replacement gear that works with common 2" Faux Wood Venetian Blinds. A library for Involute Gears, Screws and Racks from Dr. Jorg Janssen does all the heavy lifting, making this a simple project with high utility.…
Created this to help clean Venetian blinds - for 32mm hose end. Work in progress - waiting for order from Amazon - Brushes to attach… Brush material from Amazon Glue/cement cap to attachment….
The painter destroyed most of the clips used to hold the valence board on the top of the metal bracket of the venetian blinds. This is a simple replacement clip design. I traced parts of broken clips from a picture into OnShape to arrive…
Barre de réglage pour store vénitien. Longueur 52.5cm Adjustment bar for venetian blind. Length 52.5cm Print Settings Printer brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.2 Infill: 30%
