38 models
Fierce dragons over cliffs and bones. No AMS/MMU required, only two color changes. Print Settings: Layer height: 0.08 mm with a base layer of 0.16 mm Infill: 100% Color Changes: Start with Black (Esun PLA Black) At layer 8 (0.72 mm), swap…
Gaia melee from newest Update on Valorant . ''GAIA'S VENGEANCE MELEE VALORANT'' was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. Category: 3D…
This is an extention to the Hybrid Coaster model by 3D.Printed.Roller.Coasters that contains a modified bench seat with side panels along with prepainted parts for multi material printers that suits the Steel Vengeance theme. Please…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
A model of the Vengeance super star destroyer from the Star Wars: Dark Forces games. This Miniature is partly based on the version of the ship used in the Thrawn's Revenge mod for Empire at War. That design was made by Oseritzel and…
A simple box for the newest version of Flip 7 to replace the flimsy tuck box. There's a plain lid and multi-color lid.
This is a WIP, there are some geometry errors I havent gotten around to correcting yet. you'll probably have to netfab or otherwise repair to get it to print properly. remixed from: https://www.thingiverse.com/thing:2842587
A new box for the new version! I know it's called "with a Vengeance" but artistically I just couldn't get it to look good. Sleeve compatible! Be sure to print the standard version for plain cards and the sleeved version if you are using…
Die Hard With a Vengeance - Zeus Carver - 1993 3D printable model.
I used this to make some 5.25 bay covers for more ventilation. I used my slicer to add a modifier to print no perimeters and use infill to create the vent section. I did borrow that idea from another maker/model. The clips are what are…
Pumpkinhead - Demon of Vengeance - 1988 3D printable model.
A simple replacement retainer clip for the wrist rest that snaps onto the front of a Corsair Vengeance K70 keyboard. Carefully scrape off the remnants of the broken clip on your wrist rest, leaving a smooth surface, rough it up a little…
Since I loved @Markus_p’s idea of using the Rugged Box from @Whity for card games, I was happy when @ChrisBowring_3158860 designed a lid for Flip 7 for it. This is another remix, this time for Flip 7: With a Vengeance . Since this game…
Summary This 3d insert was created with several aims in mind: Fits sleeved cards No lid lift Suitable for Vertical storage Store both Flip 7 and Flip 7 Vengeance Print Instructions One plate print Print Settings Printer: Bambu Lab P1S…
This system allows all components of Vengeance Roll and Fight Episode 1 and Episode 2 to be kept in one box (Including the Kickstarter bonus cards and the disassembled dice tray, I couldn't squeeze the minis in). All cards are sleeved…
I was not a fan of the standard cardboard box with the hang flap, so I designed a simple snap-lid box with 2 sections to hold the cards and enough room to hold the instructions on top. I've set the tolerances for my printer, but included…
Skull Mask – Vengeance has the kind of expression that makes you wonder what happened to it… and whether someone is about to pay for it. Deep, menacing eye sockets, a heavily sculpted brow and an elongated skeletal jaw give this mask a…
Quick Organizer I threw together for Gordon Calleja's Vengeance by Mighty Boards. This organizer is unofficial and has no affiliation with Mighty Boards or Gordon Calleja. This was designed to fit the base game and 5th player, the…
Dusksong , Defiler of Vengeance ( Designed in Blender ) As you can see I have printed it out on my Geeetech A10T in PLA ( silk copper , silk lightgold and silk silver ) I use Prusa-Slicer , After you load the STL file click on SPLIT TO…
This is a 3.5 inch to 5.25 inch drive bay adapter for the Corsair Vengeance case. It's a tight fit, but will snap right in. This may fit other cases as well. The .X3G file has supports and is what I used on a Flashforge Creator Pro.…
Pumpkin LED tea light holder - dragon's vengeance If you love fall AND dragons, this is the right LED tea light holder for you! Cozy up and enjoy the warm glow the dragon brings to you. If you print this, please post a make for me to see…
This is a adapter you can put on your old headset to mount some new earpads, since those who came on those headsets originally are falling apart by now. To install this adapter you first have to carefully pull off the old earpad along…
This is the drone cover I made for the Teal drone remix challenge. It's a Marvel's the Punisher inspired top cover. My design features two little holes in the orbits to fit two 3mm LEDs. Under the front there's a cavity for a custom LED…
https://www.instagram.com/reel/DUfOB9gDkl2/?utm_source=ig_web_copy_link&igsh=MzRlODBiNWFlZA== Design is compatible with parts of my other sabers. Any advice on how to print the cross trim pieces would be welcome. I can't find the right…
I have remodelled the part using the original as a reference so that the bottom part is actually flat and can be used to print the part standing up without using supports. I have printed mine in PETg and they seem to be working fine,…
The window retaining strips for my corsair vengeance c70 computer case were worn out, the screw holes were messed up. I designed these replacements. Additional hardware required is m3 nuts and bolts. I used socket head M3x6 bolts and…
This is a fan shroud I made for Klipperized bed slinger printers. This fan shroud was originally made so that I could keep a budget and reuse parts from my previous modifications. compared to other designs, I wanted higher airflow and a…
J’ai utilisé le modèle C70_Blank_Panel.stl comme base, puis j’y ai ajouté une partie servant de support de casque. Cette partie provient d’un autre modèle (5.25bay-headphoneholder_v2.stl), que j’ai importé et fusionné avec le panneau à…
This is an original design for a 2 color presence token for the Spirit Island spirit Vengeance as a Burning Plague . Together with the reminder tokens , you can print a set of 13 presence token, 3 defend tokens, and 3 isolate tokens as…
Cosplay Prop for "Mistral" from the Game Metal Gear Rising Revengeance All parts are separate, so you can stick and glue them together as to fit your print bed better. If you need something adjusted feel free to send me a message
Fierce dragons over cliffs and bones. No AMS/MMU required, only two color changes. Print Settings: Layer height: 0.08 mm with a base layer of 0.16 mm Infill: 100% Color Changes: Start with Black (Esun PLA Black) At layer 8 (0.72 mm), swap…
Summary This 3d insert was created with several aims in mind: Fits sleeved cards No lid lift Suitable for Vertical storage Store both Flip 7 and Flip 7 Vengeance Print Instructions One plate print Print Settings Printer: Bambu Lab P1S…
https://www.instagram.com/reel/DUfOB9gDkl2/?utm_source=ig_web_copy_link&igsh=MzRlODBiNWFlZA== Design is compatible with parts of my other sabers. Any advice on how to print the cross trim pieces would be welcome. I can't find the right…
A new box for the new version! I know it's called "with a Vengeance" but artistically I just couldn't get it to look good. Sleeve compatible! Be sure to print the standard version for plain cards and the sleeved version if you are using…
This is an original design for a 2 color presence token for the Spirit Island spirit Vengeance as a Burning Plague . Together with the reminder tokens , you can print a set of 13 presence token, 3 defend tokens, and 3 isolate tokens as…
I was not a fan of the standard cardboard box with the hang flap, so I designed a simple snap-lid box with 2 sections to hold the cards and enough room to hold the instructions on top. I've set the tolerances for my printer, but included…
This is a card box / insert for sleeved FLIP 7 and FLIP 7 with a Vengeance card game. The cards are actually not the same size, but the sleeves are the same. Design details: The lid is secure but can be eaily removed. Both lid and base…
This is a collapsing sword, based on Psylocke's Vengeance Katana from Marvel Rivals. This model was made to be printed with a Multicolor capable 3D Printer, no painting necessary (aside from the blades, but there are stencils included to…
