Search results: vici

bandeja ,cansta,tray, basket,3d diviciones

bandeja ,cansta,tray, basket,3d diviciones para gurdar lo que quieras

EVICIV 15.6" portable monitor stands

Pair of stands designed to hold an EVICIV 15.6" portable monitor vertically. The bottom of the monitor (i.e., the side when it's oriented vertically) is thicker, so the stands are different sizes to hold it in the same place. To hold it…

Hope Brake Caliper Servicing Tools

Hope brake calliper servicing tools consist of two bleeding blocks and a tool to release each individual piston one at a time for lubricating. The tools will suit Hope V4, E4 and RX4 callipers. Printing Information 0.2mm layer height…

Minovici Villa Dice Tower

It prints decent, but the supports are hard to remove without breaking the model due to its thin walls. The tower of the building acts as the dice tower. "Built on the outskirts of Bucharest in 1905, the villa was originally conceived as…

Stand for Eviciv 7" touch screen + Raspberry Pi

A 45° case/stand for your 7'' Eviciv touchscreen and Raspberry Pi. This touch screen with HDMI can be found on AliExpress under a lot of different brand names. There's a lot of spacing for cables (you'll need HDMI - and USB to power the…

Avicii 1:1 head

A smaller bust of Avicii for holding your earphones. This is a remix of a design by Roland Von Bismarck

Recording Artists - Sex Pistols - Paul Cook, Sid Vicious, John Lydon &Steve Jones - 1977

Recording Artists - Sex Pistols - Paul Cook, Sid Vicious, John Lydon &Steve Jones - 1977 3D printable model.

Spy-gang noviciate

A fan art of the old OOP Necromundan Spy-gang de Laque with autopistol and stiletto. Thanks to grumpusbumpus for giving me the idea. Because it's a juve it is slightly smaller than adult 28mm heroic scale miniatures. I really enjoyed…

David Popovici Micro Sumo

This is a micro sumo model, named after the great Romanian swimmer DAvid Popovici.

Avicii Logo

My first ever 3D model made in Fusion360. The logo parts can be easily put onto the base and fit perfectly. No glue needed. Feel free to remix the model and make it better.

10mm hex to 24mm socket for servicing forks, rockshox and fox and installing cassettes.

Should not be used to fully tighten on forks that have a direct 24mm 'bolt' on the top, Should be fine on forks that use a cassette tool, my cassette tool had a 24mm ‘bolt’ on top. This should be used to aid in damper, airspring or…

Miyoo Mini Servicing Jig

Cut some dollar-store craft foam to sit in the screen area to protect things and then stick it down with some double-sided tape. No supports needed. Printed quickly at 0.32mm layer height with 20% infill.

EVICIV 15.6" portable monitor 45 degree stand

Stand to hold an EVICIV 15.6" portable monitor at a 45 degree angle. Printed on PLA with 10% infill at 0.2mm resolution

DJ Avicii postcard

A postcard model of DJ Avicii to hang on your wall

Tripod adapter for Vivicine M20 projector

Projector: Vivicine M20 Tripod with video head: Velbon DV-7000 Design files included. Enjoy your movies! Print Settings Printer Brand: Prusa Printer: Prusa Clone Rafts: Doesn't Matter Supports: Yes Resolution: 0.25 Infill: 15 Filament:…

Lithophane set 2. Invicible and Ichigo

lithophanes i made

Alternativní víčko pro konvici Catler KE 8010

Náhradní víčko pro konvici Catler KE 8010.

Veni Vidi Vici - Targa Italiana

In memory of my family who immigrated to this country from Sicily over a hundred years ago, I present you with this plaque. In addition to the outlines of Italy and Sicily, this is inscribed with the Latin phrase "Veni, Vidi, Vici"…

Gameboy Pocket Servicing Tray

This is a tray to place your Gameboy Pocket into when you are servicing it or disassembling to modify it. The tray is designed so that the pocket sits on a slightly raised platform that means the case sits level and the buttons are not…

7074-musei-civici-di-venezia-relief

7074-musei-civici-di-venezia-relief Category: Sculptures

EVICIV 7inch Screen Support for Ratrig Vcore3 (or 3030 profile)

I made a support for Eviciv 7 inch screen for 3030 profile with "RatRig V-Core3" written on it. Print Settings Printer: Caribou Duet 320 Rafts: No **Supports:** No Resolution: 200 **Infill:** 15 Filament: Polymaker PETG Black Category: 3D…

Víčko na čajovou konvici

Model víčka na čajovou konvici vyplněný a dutý. "Když se rozbije skleněné víčko a nechcete konvici kvůli tomu vyhodit"

Avicii The Nights Wallpaper

Avicii The Nights Wallpaper

Mounting brackets for Eviciv 7 inch touchscreen monitor, for the Original Prusa Enclosure

This was the fourth of my enhancements/addons that I created for the Original Prusa Enclosure half a year ago (see my other models here on Printables). It is a three-parts bracket (two models) that fits the mounting holes of an Eviciv 7…

Avicii Logo

This is a single piece print of Avicii's logo. It requires 1.67 meters of filament .10 dollars and 10.5 minutes print time Comment your favorite song he published.

Vicious Gardens Game Insert (with all Expansions)

Insert for the deluxe, all-in Kickstarter edition of Vicious Gardens. Prioritizes easy setup with card trays that can be put directly onto the game board, with separate trays for each of the expansions so they can be mixed in when wanted,…

2.8 LCD Touch Display Holder for Rack servicing (Raspberry Oi, Arduino, etc.)

Newly Updated** I wanted a LCD screen for my raspberry pi rack cluster (with l298 motor controller) , that was appropriately sized for use for my planned 3d printer control center. I took a look and used a smaller portion of the remixed…

avicii keychain

podložka pod konvici

podložka pod konvici s horkou vodou vytvořena ze dvou dílů které se pak slepí. Spodní díl je pro lepší odvod tepla opatřen ventilačními prostupy. Plástev vytvořena nastavením tisku pomocí modifikátoru. Filament ASA.

Bear vicious Wh40kbeariallis from Parris

Avicii Logo

Avicii Logo Category: Signs & Logos

Veni, Vidi, Vici (I Came, I Saw, I Fled)

Design Concept This model features a creative and humorous twist on Julius Caesar's famous phrase by illustrating a character fleeing while the text 'Veni, Vidi, Fugi' ('I Came, I Saw, I Fled') hovers above. Set within a stylized pentagon…

Podstavec pro varnou konvici do MB Vito

Podstavec pro varnou konvici do MB Vito. Kenwood JKM076.

Ochranná schránka na hlavici topení

Skauti naměří a nakreslí rozměry hlavice. Za nápomoci vedoucího následně vymýšlí rozměr a tvar schránky. Vedoucí podle nákresů vymodeluje 2 díly schránky.

avicii keychain

Avicii Logo

This is a single piece print of Avicii's logo. It requires 1.67 meters of filament .10 dollars and 10.5 minutes print time Comment your favorite song he published.

Self Generating Nitrogen Servicing Cart, SGNSC

This will be familiar to any USAF Aerospace Ground Equipment maintainer, the Self Generating Nitrogen Servicing Cart! I have designed this to be very easy to print and put together, requiring no support material, adhesives, or hardware.…

Toothbrush head stand (Stojánek na hlavici zubního kartáčku)

This is a stand for an electric toothbrush head. No supports are required when printing on the back side. The units in the diagram are mm. ------ Jedná se o stojánek na hlavici elektrického zubního kartáčku. Při tisku na zadní straně…

avicii

avicii logo keychain

All tools for servicing Fox Transfer dropper post (2017-2020)

DIY servicing a Fox Transfer dropper post, 2017-2020 models, is an almost impossible task given the quantity and cost (about $600) of the special tools. That is why I designed the special tools for a 3D printer. All parts have been tested…

Self Generating Nitrogen Servicing Cart, SGNSC

This will be familiar to any USAF Aerospace Ground Equipment maintainer, the Self Generating Nitrogen Servicing Cart! I have designed this to be very easy to print and put together, requiring no support material, adhesives, or hardware.…