Counting matching models…
I liked the cup holder that VersusMakes published. But when I added my tall bottle it would turn and drop. The bottle dented and the cup holder broke :( So here's what i changed: changed clamp so its at a fixed 40° angle → the holder…
this is a blank International Navistar hood logo from a International Prostar. I wanted to put our company logo on the hood of our trucks. I printed it in PETG and used a automotive clear coat to help with UV. I used my slicer software to…
Soporte para atornillar a la pared, de diseño minimalista. Permite el acceso a conexiones traseras.
VISTA Letter Office Sign End Cap. Designed in inches, exported in mm. Please see attached CADD file for dimensions in inches. Category: 3D Printing
Uppababy Vista Cup Holder. Now with enhanced stability! Fits snuggly on the frame. After testing the original model, I made some improvements to it. Printed in PETG, didn't test any other materials. Don't forget to enable supports!
Important notice: I have no idea what I'm doing. Please consider this when printing my models! These are simple holders for a LED string light on the Uppababy Vista V2 stroller. There are two parts: 1. **Battery Box Holder**: Fits a…
Good day, all! We all love the quality of our DJI FPV setups, right? But it's expensive to put a Vista or Air Unit in every single plane you own (assuming you can find one in stock). Meanwhile, lots of molded FPV wings, like the…
This is a nose mount for the Defiant Wings 42 that holds my Caddx Vista mount (found HERE ). The mount will just snap in, no need for straps or anything. To install it, cut a notch 60mm wide and 40mm back from the leading edge in order to…
This is a nose mount for the Defiant Wings 66 that holds my Caddx Vista mount (found HERE ). It will also fit the Defiant Wings 63 (they have the same airfoil, just a narrower center section). The mount will just snap in, no need for…
This is a nose mount for the Defiant Wings 52 that holds my Caddx Vista mount (found HERE ). The mount will just snap in, no need for straps or anything. To install it, cut a notch 60mm wide and 40mm back from the leading edge in order to…
This is a nose mount for the Defiant Wings Aggressor 38 that holds my Caddx Vista mount (found HERE ). The mount will just snap in, no need for straps or anything. To install it, cut a notch 60mm wide and 30mm back from the leading edge…
This is a mount that holds the Caddx Vista mount that I designed (you can find that HERE ). To install it, cut off the nose of your Nano Drak (I know, it's nerve-wracking!) right where the grooves for the spars end. Make sure you get it…
For 4mm standoffs. Works well for my FlexRC Skyhopper. Category: R/C Vehicles
Description This is a box for carrying the mobigital7 (mobula7 HD with vista naked). I set it up for the size of the mobigital7 with vista naked and frame mobula7 V3 with stock battery holder. You'll find the files in STL and STEP if you…
Support for the FPV camera of the GepRC CineLog 25 drone. I am using a Caddx Nebula Pro, but any micro-sized camera (19x19mm) could be used. The original support of the drone gave me jello and it was a very strange feeling with this I do…
Boavista Lamp by Nforce3D Exclusive club model If you need another name, just send me a message and I'll put it in the club for download. EN - Thank you for liking my model. I just ask that you follow me, nothing more, thank you and I…
model of the VISTA antenna mount on the AOS_3.5 fpv drone
I made this tray to mount a Caddx Vista and its antenna for use with Painless360's excellent pan and tilt mechanisim. https://www.thingiverse.com/thing:5150262 It should work with just about any plane with a flat surface to mount it on,…
This case turns the Caddx Vista DJI Digital FPV Air unit into a self contained FPV pod that can be attached to any RC aircraft or ground vehicle. I use Velcro to attach mine to RC planes.This allows me to convert just about any plane to…
A completely unnecessary accessory/organization rail that fits the openings within a Honeywell/Resideo Vista alarm panel enclosure. Also may fit same panels under different brands. The pointlessness is further continued by having to spend…
Supernote AX2 Manta LAMY Safari Vista Pen Clip Printing Recommendations For best strength, print vertically (with the layer lines perpendicular to the Supernote)
This mount allows installation of an Envisalink EV4 board in Vista alarm control cabinets. 2.5 mm holes for mounting the Envisalink board have been placed to allow the Ethernet jack to face right or left. The board can also be attached to…
Cup holder for large 40oz water bottles that attaches to Uppababy Vista V2 Stroller.
Bixler 2 Canopy for Dji vista nebula pro original
I liked the cup holder that VersusMakes published. But when I added my tall bottle it would turn and drop. The bottle dented and the cup holder broke :( So here's what i changed: changed clamp so its at a fixed 40° angle → the holder…
this is an antenna holder for the caddx vista VTX its made for the iflight Nazgul eco XL5
This is a DJI Vista mount I made for the ZOHD Drift. It replaces the GPS canopy, works great for keeping the CG where it should be and the vista gets plenty of airflow to keep cool. I have this setup with a pan servo right in front of the…
Nalgene/Hydroflask mount for the Uppababy Vista stroller.
Caddx Vista Mount w/ FlyfishRC stubby and ELRS antenna holder Can be used without any screws - the walls on the sides holds the vista in place Comes with mounting holes for either 20x20 or 25x25 Can hold different stubby antennas - i used…
Ya que es practicamente un rectangulo completo puedes imprimirlo a altas velocidades sin problemas 250 mm/s
Como no encontré en ningún lado la version mas pequeña para el el decodificador de la tv movistar y solo el de modem Wifi hice uno para que lo pueda ocupar la comunidad entra de manera precisa al igual que el modem PD: Preferi dejarlo sin…
HD Camera Protectors for FPV — TPU Prints These are excellent protectors to help shield your expensive HD FPV cameras during crashes. 1. Walksnail_1S_Lite_Camera_Protector (fully tested) ✅ Confirmed Fit: Walksnail Avatar 1S Kit Walksnail…
I made a 3D model from this photo https://in.pinterest.com/pin/817403401152890054/ it can serve as a pattern or a full-fledged attribute for 3D printing on fabric stencil has no gap for placing model parts so I recommend scaling for easy…
Specific mount plate for Davis & Sanford Vista Attaras (mouthful), intended for use in the Hadley Tripod Mount M5 Metric Remix. For remixing use this onshape link.
Adapter for attaching the tray from an Uppababy Vista stroller to a Tern Clubhouse+.
This is a spacer/insert for use when using a Lamy EMR grip/module with a Lamy Safari Vista body. This is not a functional piece, or needed to build this custom EMR pen, just fills out the empty space with a color of choice. Could also add…
A simple printable shell for the Vistaquest keychain camera family (VQ1015 Entry, VQ1015 R2, VQ1005, VQ2005, VQ3005, etc) that allows for swappable lenses! The shell was designed specifically for this phone lens: Amazon.com: Phone Lens,by…
deleted the upper hole, added 2 holes 90deg apart created a mount for the air unit - use a ziptie to secure the unit to
This is a very simple two-piece pan/tilt gimbal for a Caddx Nebula Nano (the standard camera shipped with most Vista kits) or any other 14mm wide camera, a standard-sized 9g pan servo (ideally one with 180° of rotation or more), and a…
3D modeled to fit inside Ludwig Classic drum lugs. Please see diagram for fit. PETG is recommended for printing! I have many drum parts available to download and sale if you would like to browse more of my items: https://www.drumstash.com
3D modeled to fit inside Ludwig Classic Mini drum lugs. Please see diagram for fit. PETG is recommended for printing! I have many drum parts available to download and sale if you would like to browse more of my items:…
Remixed the mount with 20x20mm holes instead to hold a Caddx Vista. See Fusion file to add other patterns
Made my own take on the Sandevistan. Includes Vertebrae, a Tail Piece, a Neck Connector, and a Neck Piece. Also includes Diffusers for each, which is meant to be printed in transparent filament. The print profile has hollows in the tail…
3D printable topographic miniature of Santiago, Bellavista - 🇨🇱 Chile Capture the beauty of Santiago, Bellavista 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates…
This is the remix of the top cover of the really nice Caddyx Vist Case with additional 25mm fan 12V on top. I'm using the Caddx Vista on my RC Car and the Cam overheat really fast. Had a spare 25mm fan and used it on top of the case for…
Piezas ideales para clases para la asignatura de tecnología.
Depending on the size of the part, print all parts at the same time so they have time to cool between layers. Designed for nozzle 0.4, circumference 4x
Print in TPU or PETG for the mid part that is in contact with the hot Vista unit. Print the mid section upside down with the curved surface facing up. Support is required, but that is easily broken off. Print with 0.1mm layer height, for…
I printed it in PETG, 0.6 nozzle and 20% infill. Any nozzle size will do. No supports required. Printed standing up as it would be mounted to the servo Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No…
this is a blank International Navistar hood logo from a International Prostar. I wanted to put our company logo on the hood of our trucks. I printed it in PETG and used a automotive clear coat to help with UV. I used my slicer software to…
This is a remix of my original Rooster VTX/Receiver Antenna Plate. Updated to hold and protect the stock antenna of the Caddx Vista HD VTX at a 30 degree angle. The receiver antenna tube holes have also had their diameter increased by…
Printing Instructions: Rafts: No Supports: Yes Infill: 100% Filament material: TPU
IBM NetVista 09N5757 PCI Retention Bracket (Desktop) This is a recreated PCI retention bracket for IBM NetVista desktop systems (FRU 09N5757) . The bracket secures installed PCI expansion cards to the chassis, keeping them aligned with…
This recreated air baffle duct for IBM NetVista systems (FRU 09N5735) helps guide airflow through the chassis to improve cooling efficiency. The duct directs air across key components such as the CPU and motherboard, ensuring proper…
IBM NetVista 09N5773 Fan & Speaker Bracket (with Speaker Mount) This recreated fan and speaker bracket for IBM NetVista systems (FRU 09N5773) mounts the system fan and internal speaker in the correct position within the chassis. The…
IBM NetVista 37L4987 LED Cable This recreated LED cable for IBM NetVista systems (FRU 37L4987) connects the front-panel status LEDs to the motherboard, allowing the system’s power and activity indicators to function as intended. Front…
TPU with supports Traditional 30 degree for outdoor 22 degree for indoor Category: DIY
A little spacer for mounting the caddx vista camera (wich is about 20mm wide) in my Transtec Frog Frame (28 mm wide sides). Spacer is first screwed to the cam with the included M2 screws. Then mounted in the quad using some additional…
Soporte para atornillar a la pared, de diseño minimalista. Permite el acceso a conexiones traseras.
Hyperlite Glide GPS DJI Caddx Vista antenna mount. Category: R/C Vehicles
A glide friction fit antenna holder for the caddx vista. I recommend heating it with a heat gun at like 170c for around 30 seconds to soften up the plastic so you can shove the antenna in and then it will shrink down onto the antenna when…
An improved version of the red pod and made for the nebula pro instead of full dji camera. Uses long metal m2x16mm screws to screw the vista down. Cuts in pics not needed for USB-C port, this has been fixed in uploaded versions. M3 Screws…
Simple and lightweight pan for Caddx Vista Added new version. Category: R/C Vehicles
A FPV pod for the caddx vista air unit to mount on to the Skyhunter racing/nano canopy. Print Settings Printer: P3 steel Rafts: No Supports: Yes Resolution: 0.2 Infill: 20 Filament: Filamentive Petg White Category: R/C Vehicles
This mount will help you secure antenna from caddx vista to AlfaRC Fi-115 frame. Print with tpu for best results.
I accidentally broke my toilet flush button nut while cleaning the cistern. After learning some 3D modelling, I decided to make my very first home repair model, and here it is! This model is a threaded nut for a Bellavista flush button. I…
Remixed for the Caddx Vista. Use m2x16 screws w/ nuts to hold the vista down. I added extra holes for mounting options. Remix from https://www.thingiverse.com/thing:4775067
Just put a Caddx Vista unit together with a 30x30x6mm fan and a 5V regulator into a special designed housing to be used as a standalone unit for applications without guaranteed cooling and flight controller, e.g. into the hull of my FPV…
This is a mount for the newer version of the Caddx Vista antenna. You can remove the tube and run the antenna coax through the hole. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: .2 Infill: 20…
This is a mount I made for the apex. It holds a vista antenna, rush cherry, or foxeer lollipop and a tbs tracer antenna.
I like fountain pens. My current favorite is the Lamy Vista Fountain Pen . The one drawback is that I write in two colors – blue (or black) and red. But the pens only come with a black finial (the end part of the cap). So I…
Con un foro da 4.5mm per un fissaggio universale ecco l'ancoraggio per trecce elettriche.
I have a very tight build where I assumed the wrong esc dimension but luckily there was enough space at FC height so i designed a riser that sits on soft mounting grommets, added a holder for rx and a sort of doughnut where i could route…
3mm high spacer with underneath wire "cavity" (2x10mm), yes the file it's flipped upside down for print ease Category: R/C Vehicles
enclosure for the Caddx Vista that can be additionally secured with m2 nuts and bolts to the mount, meant to be positioned on top of a 30x30 stack feet/spacers height is 3mm, the holes are intentionally a tight fit to keep it in place…
Hello, This is an XT60 holder for an TBS Source One Frame with or without the original Caddx Vista Antenna. I designt his because i often got the cable from my XT60 plug into my props. First i used the original Caddx Vista Antennamount…
Mounting frame for the Caddx Vista antenna lollipop style. The antenna come with the drone but there's no mounting option for it. You will need two self taping screw or an M2 screw/nut. Total additional weight is 1gr.
Quick release FPV Pod that you can mount to different models. Just install the "base" and wiring to the FC on your models and fit the FPV Pod to the model in current use. Compared to the pictures the locking system has been improved and…
Was helping my dad attach a caddx air unit lite on his Martian II frame. Couldn't find any mount that would fit the new (slim) antenna on this frame, so I quickly designed this in FreeCAD. The project file is included (not proud of it…
Diatone Roma F4 GPS mount antenna mount... Category: R/C Vehicles
Movistar Riders Logo and Keychain You can print multi color keychain with a single nozzle (use this video for reference) or using multiple extruders, palette, etc. I also add a design for dual color logo and keychain, just use Cura's…
Changed the bottom piece of UAVPilot1's model to be printed without support. Category: Camera
Standoff spacing is 21mm. Standoff height is 28mm if your frame is not the nazgul and you want to match it. This mount was meant to reduce vibrations caused by the antenna, so I printed mine with PETG. It is very stiff and doesn't flex,…
Pan cameramount that also holds the vista. It fits in the reces of the FPV canopy of the AR wing Pro. also secure the canopy in some way, else you will lose it! its operatred with a normal 9g servo. the Clamp part goes on the inside of…
was rooting my vista units and was getting around 96c without cooling… yikes! worked this up to sit around the height of most vista units on drones or at least it works on all of mine :) temps with a 5015 24v fan from TH3D keep it around…
I couldn't find any dual antenna mount for my haoye X1 freestyle Frame, so here you go.
This canopy was created for use with the X-knight frame, but can also be use with the Twig XL. It allows for the use of a naked DJi vista and caddx polar camera.
My version of the Sandevistan From Cyberpunk Edgerunners. This is based off of the one from anime not the video game model(there is differences). The model ends up being about 20inches in total, so scale it to fit your needs. All of the…
You need glue and some parts need force or a bit of cleaning. I look forward to your prints. Potřebujete lepidlo a na některé části je potřeba použít sílu nebo je trochu očistit. Těším se na vaše výtisky.
Es un soporte para ponerlo en un Mac de 27" y sujete el Iphone y poder hacer vista cenital.
This tripod quick release was designed to attach to a Davis and Sanford (Tiffen) ProVista tripod with an FM18 Fluid Head. The four mounting holes will accept ¼-20 nuts. Use with nuts if offsetting the telescope to one side of the tripod.…
Made this cage a while back to protect the vista fron chopped grass and sticks that might try to get into the vista, didn't have much problem printing, onse side has cuts to allow to pull down and connect a usb cable.
Nose installation for airunit light in albabird, cutout template should be used to cut space in nose. Airunit is screwed into tray and slide into rails from inside. Lock part should be glued into canopy floow it keeps tray in place.
