Counting matching models…
This large ornament or tabletop decoration (~5" diameter) uses a standard tealight LED candle (38mm diameter) to light it from within. If you have a tealight of a different size, I would scale the model to adjust to it's diameter. Print…
This classic holiday 3D model can be used as a large ornament for your Christmas tree or as a tabletop decoration. The charming glowing Christmas tree in the town square is surrounded by shops. This updated design prints better and has an…
einfach zu drucken ohne stützen. der fuß hat einen 0,2mm größeres loch als der bogen. sollte also sehr gut passen. bischen kleber rein und kontrollieren ob der bogen senkrecht steht. der bogen hat oben ein 3mm runden stab. da passt das…
"Concerning the number nine: the Baháʼís reverence this for two reasons, first because it is considered by those interested in numbers as the sign of perfection. The second consideration, which is the more important one, is that it is the…
Here is an example of the LED votives but most will work- https://www.amazon.com/dp/B0BW86BLMY Just press them right in the bottom and you're good to go. If you have issues try adding brims.
Update 1 - December 1, 2025 New shades added for Christmas Nativity , Hanukkah , and Kwanzaa . Details in the “Shades” section. Update 2 - December 5, 2025 Shades: 11 new designs added, including LEGO Santa , holiday sweaters , cocoa cups…
I printed Snowglobe Votive Ornament - Winter Cabin available at https://www.printables.com/model/325716-snowglobe-votive-ornament-winter-cabin and put a tealight in it. It looks and works great but our tealights where thick enough that…
Miniature Votive Stupa , c. 1000s. Eastern India, Bihar. Bronze with inlay of semiprecious stones; overall: 29.2 cm (11 1/2 in.). The Cleveland Museum of Art, John L. Severance Fund 1982.132
Vase mode - Scalable Basic Xmas tree for LED votives or scale up for vase/candy dish. Spiral vase mode.
A simple quick remix of the votive snowglobe hanger that changes the hexagon cutout shapes of the original to star shapes for a more ‘Christmassy’ feel! Just print hanger and stand, slot then glue together Printed lying down at 0.2mm…
The LED hole is 36mm wide x 32mm tall so SCALE UP if yours are bigger. Make sure it clears the nozzle. Machine stops for filament change but just continue same color. See below- Yes, it's sealed in there as long as the batteries last. I…
Small lantern to hold a battery-operated tea candle. I've also included one without the hole. the tops will need to be glued on separately. The hole is sized so a battery-operated tea candle can be wedged in it. I measured it to the Hobby…
Base and wiring area for the Snowglobe here: https://www.printables.com/model/325716-snowglobe-votive-ornament-winter-cabin You will need one or two standard LED light bulbs and a 12v power supply. I got my power supply from old…
Tealight candle holder Materials Printed components Printing Consider using a skirt or raft due to bed contact surface area 0.2mm Layer Height Infill 20% - Printing the solid model with no perimeters and different infill patterns is…
PRINTING, ASSEMBLY, AND FINISHING Printing: Be sure to use the “Aligned” or “Rear” seam setting in your slicer so that the Z-seam is in one location and can be sanded out more easily if desired. Color/Finish: A matte white or natural…
This is a hanging, antique style sconce or lantern designed to hang from a hook, and which will hold a 1.5" dia. LED votive flameless candle. It is designed to be used as a prop (candle wall sconces on a river boat -- see photos of actual…
Ich wollte ein Teelicht mit 38mm Durchmesser in das Modell “Snowglobe Votive Ornament - Winter Cabin” (https://www.printables.com/model/325716-snowglobe-votive-ornament-winter-cabin) einsetzen und habe dafür diesen Halter gedruckt, der…
A set of small candle holders with a clover cutout pattern, sized to easily fit Yankee Candle's standard votive candles.
Show your support for Israel and the IDF with this curved lithophane featuring the Hebrew text of the prayer for the Israeli Defense Forces. This is meant to surround a tea light or small votive candle. The images will only be apparent…
An elegant LED tea light votive with fins. Two models are available: one with a lid and one without. Both are around 6cm tall, 5.6cm wide, and have 30 evenly distributed fins. The OpenSCAD file is provided for customizing the candle…
You agree to only use LEDs, because you are not stupid🍻 I had 100 38mm LED Candles from a previous project and wanted a way to make them look nice, I nip the feet off before putting it together. I settled on this 2 part design which…
As winter approaches I'm reminded of this votive candleholder created last year by one of my students, Lauren. Its pure design perfectly leverages the opportunities afforded by transparent filament and dual extrusion printing -- though it…
This is a snap-in to the base pieces made up of 4 fence parts (one with the cardinal) and a clear screen with flying birds. Base has fuzzy skin on outside only. Does not require an MMU. Was printed on a Prusa MK4, manual color changes.…
I made the 106mm version for a spherical glass container that I put the holder into first, then added beach sand and shells from a trip. Those things pretty much covered the holder so it couldn't be seen. The stand held the tea light…
Printed on Prusa MK4 with manual color changes. Does not require an MMU. Uses 3 battery powered votives (36mm diameter). See color change instructions are in the PDF.
Tealight candle holder Materials Printed components Printing Consider using a skirt or raft due to bed contact surface area 0.2mm Layer Height Infill 20% - Printing the solid model with no perimeters and different infill patterns is…
This is a snap-in to the base pieces made up of 4 fence parts (one with the cardinal) and a clear screen with flying birds. Base has fuzzy skin on outside only. Does not require an MMU. Was printed on a Prusa MK4, manual color changes.…
Printed on Prusa MK4 with manual color changes. Does not require an MMU. Uses 3 battery powered votives (36mm diameter). See color change instructions are in the PDF.
This is a cup that can be used as a pencil cup or a tea light/votive holder. When printed in a light color and adding a flickering led candle (NO REAL CANDLES) the pattern really comes alive.
A Pencil Cup that if printed in a light color can also be used as a Tea Light / Votive. It has a modern pattern. There is one that has a thinner wall so that it is better to use for the Tea Light / Votive.
Votive Style Candle Holder, Thanksgiving/Fall Themed. See Shutterfly for candle dimensions. Holder is 4 inches tall.
Here is a quick votive candle holder I designed as a Christmas present. It should fit most brands of votive candles and when the flame is strong you can see the patterns around the base and on a close wall. I think the Clear PLA for the…
Dating back to the Middle Ages, the so-called rest crosses were illuminated with a lantern and served as signposts for hikers and travelers. I have not split it. But I would suggest doing that right under the main box (probably the cap as…
