Counting matching models…
This is a customizable keystone wall mount from https://thingiverse.com/thing:6647 Many thanks to https://www.thingiverse.com/jsadusk for providing it. Included STLs are for 1, 3 and 5 keystones for a tapered headed 3.5mm screw. Use the…
Devices which need screws in a wall to mount on, but it is difficult to place them? For small electric devices/computer accessories like home routers / gateways / CPE small network switches battery chargers Requirement to be usable, it is…
Intro This supportless wallmountable dispenser is easily printable and designed to fit the smaller tampons used in the EU. It should fit o.b. ProComfort and everything up to roughly 15x55cm (min. fitting six tampons). It can be used…
This wall holder stores a couple of standard size magazines conveniently. There is also a smaller version for shopping lists and smaller magazines. There are small dove tail connections on the sides for mounting different kind of holders.…
Use a bolt and nut or for extra stability and strength if you need to hulk on the paper roll, use a threaded bar all the way through with a nut on each side. For easy assemble/disassemble, use these knobs with the hardware: Print with 4+…
I designed a wallmounted cupholder. It can handle glasses, bottles oder cups up to 89mm. (inner diameter 90mm) The wall has a hight of 62mm, the holes for the screws are 5mm. At the bottom I made some holes as draining for rainwater. The…
I made a new vesion of the enclosure from Marco64 to mount the enclsoure on a wall. I also changed the PG7 entry to PG7 & PG9 threaded entries. Because of the PG9 I had to chnage the lid a little bit.
I wanted to have a wall mount for my Japanese chisels. This worked wonderfully. Infill 20% Support: no Recommended material: PETG, ABS or ASA I wanted to have a wall mount for my Japanese chisels. This worked wonderfully. Infill 20%…
A 200x202x65mm wall mounted shelf, dose not need supports
Devices which need screws in a wall to mount on, but it is difficult to place them? For small electric devices/computer accessories like home routers / gateways / CPE small network switches battery chargers Requirement to be usable, it is…
This 3D-printed wall-mounted shelf is designed to hold small speakers securely while keeping your setup tidy. The shelf features a hole at the back to neatly route the speaker cable, ensuring a clean and organized appearance. Its sturdy…
It has holes through the design for easy attachement to the wall, and holes in the bottom for individual charger cables. It also has slits in the middle to hang the charger cables on when not in use. A friend of mine (who initially asked…
Installing these storage options for your acoustic panels does not require any tools. They are designed in such a way that they stay on the wall simply by the force they exert on the ribs (in my case the shelf holds at least half a…
I printed in .28 layerheight with 0.4 nozzle, 4 walls, 15% infill. No support needed. Use some sandpaper if tight fit. Did not want the bottles to rattle around to much. I printed i ABS, but PLA or PETG should also work just fine. As I…
Wallmounted USB cable holder. Best print as shown. layer height: 0.2 nozzle: 0.4 Filament in pictures: Prusament Galaxy Black - Extruder 215 - Bed 65
simple trash bag holder no supports needed -------------------- Want to support me ? → paypal.me/AlphaWolf97
There are many spoolholders out there in the wild. After some consideration, I found that “Filler” seemed very nice. So I wanted to build on that. But I wanted something on my wall. There are some designs out there. Many will work. But I…
This is pretty much the same as Parkside PAS4 Mini Cordless Screwdriver Pegboard Acessories but now you can have them on your workshop wall without a Pegboard! I assure you, you will love this marvel of modern wall mounting technology.
REMIX by MehTechArt The original RWB Porsche 911 <964> Turbo Wall-mounted model has a thin connection between the spoiler and the body. This causes problems even during printing. The spoiler breaks off when the supports are removed. I've…
Pen-/ toothbrushholder in shape of a woman Print in PLA+ Athena from Olympfila Beautiful sculpture The nude woman is not my design, i only remixed it to a pen-/toothbrushholder with fusion 360 and give it a base and a wallmounting…
Just a simple Headphone Holder for mounting on a wall or cabinet. Step File included Print Settings Printer Brand: Anycubic Printer: Semi-closed 4Max Rafts: No Supports: No Resolution: 0.25 Infill: 20% Filament: Eryone PLA White Category:…
Intro This supportless wallmountable dispenser is easily printable and designed to fit the smaller tampons used in the EU. It should fit o.b. ProComfort and everything up to roughly 15x55cm (min. fitting six tampons). It can be used…
The WAGOStation is a fully 3D-printed, wallmounted dispenser and display system for WAGO 221 connectors. Designed to bring structure and style to your workspace, it lets you store, organize, and dispense your connectors with precision and…
Why did you make this? My first model, made for a need which I could not find a solution for on the site, a newspaper and magazine rack. Because of the limited space on the average 3d printing bed, I opted for a modulair design which…
catchall bowl i made in freecad. file is included, adjust to your needs. the overhang is printable without supports. this fits nicely into a corner and uses the space effectively. i used hotglue to mount it, but holes are easy to add.
This wall holder stores a couple of standard size magazines conveniently. There is also a smaller version for shopping lists and smaller magazines. There are small dove tail connections on the sides for mounting different kind of holders.…
simple nozzle holder to mount on a wall either with tape or screws
Use a bolt and nut or for extra stability and strength if you need to hulk on the paper roll, use a threaded bar all the way through with a nut on each side. For easy assemble/disassemble, use these knobs with the hardware: Print with 4+…
Hanging Brush Holder. Holds 3 rows of 9 brushes =27 brushes Mount: 2 wood screws: 43 mm apart
I designed a wallmounted cupholder. It can handle glasses, bottles oder cups up to 89mm. (inner diameter 90mm) The wall has a hight of 62mm, the holes for the screws are 5mm. At the bottom I made some holes as draining for rainwater. The…
An shock absorber to prevent the door handle from damaging the wall. Installation Move your door close to the wall and see where the handle hits the wall. Now grab the printed model and hold it up against the wall, till it aligns with the…
Perfect for pliers with a thickness of up to 22mm. The mounting holes are M2.5.
I made a new vesion of the enclosure from Marco64 to mount the enclsoure on a wall. I also changed the PG7 entry to PG7 & PG9 threaded entries. Because of the PG9 I had to chnage the lid a little bit.
Wallmounted Rack Hanger. It has approximately 9 cm of useful space for hangers.
Soporta macetas pequeñas pero se puede escalar para soportar maceteros mas grandes.
The keyhole size is 8mm to 5 mm Attached the .3ms files for both Mk3s and Mini I have changed the setting Seam position to "aligned" And with a plant in it, hanging there on the wall, it is quite nice! Will attach a photo later… My pots…
A super simple wand holder for a single wand. It has two types of recepticle for your wand, a round and a square one. Mix and match to your needs. Has hidden mounting on the back. You can even use thumbtacks for mounting, the holes fit…
A simple dart holder modeled after a flight. Prepared for single time filament swap for an easy 2-color print. Just as easy printed in uniform color. Features 2 slots in the back for wall mounting. Holds up to 3 complete sets of darts…
When you need to add space between the window and the lamp. Print solid, and use a ziptie to secure the cord to the arm.
Organizer for Desktop, Workshop etc. Made of 3mm birch plywood. No Nail, no glue. Feel free to modify, improve. Category: Organization
This is a Remix of hxp3d.pl's medium flower pot. When I first printed it, I saw that the squares were about perfect for a tealight if you put it sideways. To not get heat-issues, i took away some of the wall and added a wall-mount, and…
Wallmounted USB-cable holder for 6 cables. Printed on Bresser Rex (Flashforge Adventurer Clone). You need 2 screws an 2 dowels, too.
I am pretty new to 3d modelling, but I think you can download the .step-model and change the parameters for every screwdriver and caliper to fit your needs! (In onshape, I made a sketch named “parameter-change”, thats where you can change…
Just labels for this filamentsample storage: https://www.printables.com/de/model/286887-filament-sample-expandable-wall-mount used with this samples: https://www.printables.com/de/model/27814-filament-swatch-sample Print with the text on…
Accueille une douille type E27 Prévue pour être montée sur une boite d'encastrement de 67mm Réglable en hauteur sans outils. Instructions : Attention toujours vérifier que le courant est coupé ! Passer le cable dans le trou du support…
it is made for a friend originally, from personal experiance i reccomend printing the insert at 99% so if your printer is not 100% accurate it still fits. that all being said, it is a good way to hang a small amount of keys eigther on a…
Printed easily without support. Remixed from my own regular pots. I hang them on the wall with sugru. works perfectly. I guess that drilling a keyhole should work as well for hanging with skrews. Printed with: Stonefil from formfutura,…
This filament spool holder is designed to place filament spool at an angle on the wall. I use this to my Prusa minis to ease the acces to spool change instead of the rollerskate thingy. Fits up to 75mm wide spools Print instructions The 2…
This is a simple part that utilizes emmett's very good ‘Gear Bearing’. The model basically stacks several of those (which have been customized to suit the scale of this model) on top of each other, into a little roller, with rounded sides…
Designed for solid shampoo of a diameter of 60mm
very basilar wallmounted spool holder. requires 4x M3 screws to mount it
Just a simple shelf for either pegboard (4mm holes, 12mm hole spacing) with support pegs, or just wall mount with screws. The support pegs will require support. Have not yet printed it as i have not gotten that far in my workshop project.…
i needed a replacement cover for a transformator that was larger then the orginial one, i printed this then laser cut a wooden plate to cover the holes in front.
Hello its been awhile. this was actually made around a year ago (sorry for not uploading) but wasn't thinking about uploading it until recently and gives me the added bonus of know if it destroys the usb c port on the controller (these…
A wall mounted cupholder for regular plastic cups. Made for work to clear desk space
Hi. I designed and printed a simple holder for the hose I use to change the water in my fish tank, so I can hang it on the wall. You can use it for cables and other things for sure, too. The model in the pictures is printed in PLA with a…
Designed to fit the o.b extra protect, but also will fit the “small/normal” ones Can be mounted on the wall with double-sided tape should fit up to 10 tampons
-Fits up to 75mm wide spools. -Nice Bambu Logo at the front. Print instructions The 2 parts is designed with a tight fit - so you just push the parts together using a bit of force and there will be no need of screws.
A PS5 controller holder, which uses the tablemount positioning pins on the TV to fix the holder in place. You can only use this when the TV is NOT using the table stand, since it uses the 2 holes and steering pins when mounted to the TV.…
Just a simple headphone stand which can be wallmounted by screws or just add some double sided tape on it. DImensions ( but you can scale it up) : 50x50x34mm
Storagebox for fuses, wallmounted. With: 132.5mm, Depth: 56mm, Height: 170mm Fits: 10A, 16A, 25A, 35A and 50A fuses. Needs supports to be printed.
A small organizer I made for my Isopropyl. Mounted with 2 small screws, head bigger than 6mm Diameter.
Simple bracket to mount keystone connectors with option for custom text
These HexHex-boxes (Small) are meant to store small things - on the wall. In order to generate a nice hexagon look with them, but to get to your things, they have doors that can be opened via hinges. The boxes have a Hexagon-mount on the…
The boxes were originally made for wall mounting: but of course they also work without! This remix are the same boxes without wallmounting features. The wall mounted edition is here: HexHex Wall-Box - Wallmounted & Removable (Small) von…
After my holder for the PB Swiss Tools or Garant screwdriver was quite well received, I modified it slightly to now give my flashlights a fixed place in the workshop. The inner diameter is 25.5mm, so the flashlight head must be larger to…
RohrGreeblie zur Wandmontage inspiriert von der Disney Star Wars Serie The Acolyte Staffel 1 Folge 1. Es wurde versucht, so gut es geht 1:1 alles umzusetzen, was halt möglich war, als Referenz mit der Serie. Das Rohr ist Innen Hohl und…
Electrical wall-mounted box for switch and sockets. Depth 15 and 20mm.
This PSVR holder fits perfect and you will not see it when the VR is on the holder. Its simple for people that doesnt want any complicated constructions and their only goal is to hang the VR on the wall. You dont have to worry about it…
Make sure to like and follow for more!! :) check out my instagram page (diecast164scalecollector) 5-car wallmounted display that can be can be hung up using pins. This model holds 5 - 1:64 scale cars easily scaling up will be required to…
