1,660 models
This is a stubby nozzle for the Milwaukee M18 FUEL Blower. This nozzle is for the NEW blower model (3017-20) that Milwaukee just released in 2024. I couldn't find one available for this model yet, so made my own. I was able to get it to…
Print approx. €13.60–€16.62 excl. taxPreliminary estimate for PETGSource material: PET
I have change a few details from Sean&Lucia model. All the fillet are now chamfers Added chamfer in the bottom corners to add strenght Added chamfer were the Packout sits for a better stability of the case in the bracket The top surface…
Print approx. €9.57–€11.70 excl. taxPreliminary estimate for PETGSource material: PET
3 simple hangers for a Milwaukee Fuel 18V tools. No supports required. Tool Hanger V2 - good for the multi-tool Wider Tool Hanger - slightly wider version of the original V2 part, good for 115mm angle grinder Jigsaw hanger - good for the…
Print approx. €3.73–€4.56 excl. taxPreliminary estimate for PETGSource material: PET
Heavy-Duty holder for Milwaukee M18 batteries, which was created specifically for the larger high-demand and new FORGE batteries. The holder can be mounted on the wall (designed for 4.5 or 5.0 mm screws), but since the batteries also lock…
Print approx. €3.17–€3.88 excl. taxPreliminary estimate for one variant
Created to mount your the Milwaukee PACKOUT bins on the IKEA SKADIS!
Print approx. €1.95–€2.39 excl. taxPreliminary estimate for one variant
printed in PETG 0.3MM layer height
Print approx. €1.92–€2.34 excl. taxPreliminary estimate for PETGSource material: PET
A simple cover to protect the new, red Milwaukee guide rail. This is simply pushed onto the rail on the right and left and clamps by itself. It reliably prevents damage to the ends. Best printed with TPU, ASA or PETG. No supports…
Print approx. €1.28–€1.56 excl. taxPreliminary estimate for one variant
I love the little Milwaukee FMCS cordless circular saw, not only for metal, but also for wood! But unfortunately there is a problem: Milwaukee does not offer a way to use the saw guided on the rail for whatever reason. To finally solve…
Print approx. €9.82–€12.00 excl. taxPreliminary estimate for one variant
Milwaukee M18 Battery Holder with Charged / Needs Charged Flags 4 Model files available, With and without the locking part for the battery clip as well as with and without the charged/ needs charged flag.
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant
I have a unique space and I wanted something to “holster” my M12 installation driver on the underside of a shelf above my standing desk. Most options I could find were wall mounts. I printed it with minimal supports standing up. Due to…
Print approx. €5.79–€7.08 excl. taxPreliminary estimate for PETGSource material: PET
Jeden z elementów organizacji warsztatu
Print approx. €10.63–€13.00 excl. taxPreliminary estimate for one variant
if someone ever needs this: it's a simple spacer for the grip of a TWAudio Speaker.. →print it with high 99% - 100% infill settings (and use it solely on your own risk :-)
Print approx. €1.57–€1.92 excl. taxPreliminary estimate for one variant
Milwaukee M18 Battery Holder With Lock. So yit can be used inside van etc... Easy to print. Also I have created "short" version of this without lock to use inside workshop. https://www.prusaprinters.org/prints/53685 Print instructions…
Remix eines Batteriehalters für Milwaukee M18 Akku. Boden abgeflacht um mit PLA bessere Druckergebnisse zu erhalten
This is a remix of the wall mount on thingyverse. Converted from a single to a double mount to make life easer and not as frustrating. Increased to 6mm holes Made larger Screw Counter sink to accomodate decent screw to hold to wall…
Need a little extra storage for nuts and bolts readily accessible? maybe a drink holder. versatile storage crate for Milwaukee packout system. Print at scale, supports may be needed along bottom of crate depending on printer. crate itself…
Printed .2-.26 layer height. I like to use 20% infill, could go more or less. Mounting holes made for #8 wood screws. Added an extended version for tools with the metal belt clips on them. Another extended version added with deeper…
Note!** June 13 2022 Version 5 Released. ** - Increased spacing and set back to accommodate the Larger 3 amp and up battery sizes - Added single and 2 unit shelves if you don't have 3 - added profile and snugged fit for better hold and…
I designed this in freecad, it prints fine at 0.3 layer height 0.45 line width with a 0.4 mm nozzle. print with supports for the Grove
Please drop a like if you want to see more of this kind of stuff:). I remixed this model with different tolerances to make sure the batteries stayed on the wall above my busy work bench and vibrations from the tools. 3 battery Holder for…
I needed an accurate (tighter tolerance) cleat for the bottom of the Milwaukee Packout so I started from scratch and modeled my own.
Organize your M12 Milwaukee tools with these mounts. Extended version for radio, but could be used with other tools if you need them sticking further off the wall. Printed in PLA, I like to use 3 walls and 20% cubic infill but they are…
I was designing very specific Packout receiver to fit a toolbox and someone mentioned making a standalone universal receiver. This receiver can be used in pairs to hang a full Packout box or standalone to hold items that only have one…
See update notes below ↓ 1-8-2026 This is to store a Milwaukee router inside the Packout Compact Organizer box by Milwaukee. The parts bin could use a lid but I don't plan on having much else inside this area other than the vacuum shroud.…
This is a blank insert I made when I created My Router Case for the Milwaukee Packout Compact Organizer. I have this shared as part of the files but I figured I would make it a seperate model. 3mf, stl, and step files included.
Universal Cordless Impact Driver/Drill Holder A universal cordless Impact Driver/Drill Holder meant to organize your workbench as well as make it more ergonomic and easier to use. Front extrusion allows for it do double as a bottle…
printed at 30% or better for strength, best to use PETG or ABS if used in hotter spaces.
I wanted to store my M18 batteries mounted to the inside of a drawer with the tools they power and not dig to find one. Unlike other M18 mounts, this model keeps the battery secure simply through friction, the battery does not "click"…
Straight and angled tool holders + a quad battery holder for mounting Milwaukee M12 system power tools on Wall Control or standard pegboard. I've made both a heavy-duty version with a 3rd leg for extra stability and a standard version…
Prints upright with no supports necessary. Two small supports designed into the model. (should pop right out) Adding wires and connectors is up to you. Designed around the M18 Red Lithium batteries that I have. Cannot confirm fitment for…
Converted @Zer0sum's design into Fusion 360: Modified chamfers to better match Packout design Adjusted tolerances for a better fit Added mounting holes for #8 Screws Upsidedownified = ready for printing without supports Modify the .f3d…
This will securely hold an M18 grinder or oscillating tool and should work with most other brands as well. I recommend printing with four or so parameters for strength. No supports are necessary. The included holes are sized for #6 wood…
UPDATE 08.03.24: Added a new version (Milwaukee Charge Mount 3 v8). Did some edits on the holes and beefed up the side brackets. This virtually eliminates any wobble. Also, rebuilt the small mounting tabs… better fit. To be honest, I use…
This model allows you to mount the M18 batteries for the Milwaukee tool system on or under a shelf, or on a wall. The batteries snap in using the same retention mechanism as they do on the tool. This lets you mount them where it's…
its just a rough approximation of the inside of the Milwaukee Packout compact organiser case for you guys to edit for specific things you wish to put in it. I think i have seen something online but this is modeled by me and is far from…
This is a CAD blank for the internal profile of the Compact Milwaukee Packout Organizer. I have supplied both the original fusion file and a .step file. Feel free to use it as a way to satisfy your endless urge to organize as as a kind of…
Decided to make my own version of the M18 battery adapter. This is a bit more involved than some of the others on here. Its two pieces which can be printed without supports. It uses 5 M3 flat head screws and nuts to hold together. The two…
A battery carrier/tote for Milwaukee 18v batteries. It's stable and won't tip over even when fully loaded on one side. It also includes a quick connect wall mount. Uses a pair of 8g stitching screws like these -…
Couldn't find a decent mount for these so I made it myself. They are not perfect, but work great for me. Only caveat is being that these tools weren't designed with mounting in mind actually placing them on the mount is a little tricky.…
Milwaukee M18 Battery holder that you can use to mount 4 batteries. The initial holder design was created by https://www.printables.com/social/69337-vikgr/about . The design has space, so you can easily press the buttons on a battery to…
This is a modified version of packout hangers from blahblahblahresearch. I wanted these to have the recess for the charger's base feet to be 90 degrees from the original design and far less tall so that the charger is more stable in the…
nozzle for the Milwaukee 2724-20 M18 FUEL Blower there's one thicker one and one thinner one
These feet allow you to attach anything you want onto your Milwaukee packout toolbox. Post-Printing To help the bolts thread through the parts easier, I drilled out the holes with a 6.5mm drill bit. How I Designed This I've decided to go…
This Milwaukee M18 battery holder mounts to the wall and positions the batteries horizontally at a slightly upward angle. This allows for the batteries to be stored closer together than the traditional vertical holders.
I've included a blank label and “Rotary Tool”. Easy to add text in a slicer - I used BambuStudio. I used raised text and printed on the face with supports. You could also print the text flush for a cleaner surface and no supports needed.…
PackUp Labeled Nesting and Stackable Bins for Milwaukee Packout Organizer Models 48-22-8430 and 48-22-8435 A nesting divider bin system with customized labels for your Milwaukee Packout organizer. October 23rd 2025 Updates: Parametric…
I designed some Battery holder for my Milwaukee M12 battery to organized them. Printing: Printer: Mk3s+ Material: PLA/ PETG Infill: 15% Layers high: 0.3mm Note: The bigger Battery's (4-5) are not fitting in the 2Ah battery holder.
My battery cover had fallen off due to abuse and machine coolant exposure, which degraded the original cover. This is a replacement cover for the Milwaukee M12 battery, this works for the small stubby type shown in the picture. It clips…
Editable insert for the thinner, Low Profile organizer. The over all inside height should be 38mm.
You'll most likely want a mix of files for your exact needs. If you're using a 48-22-8436 5-Compartment Low-Profile Compact Packout , you can fix 3× Slim Long Bit Bins (or a mix of half-width bins) If you're using a larger 48-22-8431…
Please as a simple return for the job... Like, Share, and Post your prints ! Thanks ! Optimized for printing vertically like a breez.. No supports needed ! ;) Original file fit on 35mm diameter tube (Festool, Bosch,…) Update 05 November…
These Packout low-profile organizer labels are inspired buy Dan Winciker’s Milwaukee Low Profile Packout Bit Set Label thing on Thingiverse. I have re-modeled the labels in openSCAD so that you can customize the text on the label and…
This is a clean and simple Milwaukee Packout Rail bracket. It is probably the most cost affordable design out there as there are no addition screws, nuts, or extras to purchase. Print Instructions: Please print 1 at regular orientation…
Dividers for stock factory Milwaukee Packout Deep Bins; divides bins into halves or quarters.
Mount your Milwaukee M12 or M18 Batteries cleanly to your wall! 2 of each file are available. “Non Locking” files will not retain the battery, better for shop or home storage where vibration and movement are not an issue, and easier to…
M12 wall mount for drills. Keeps the drill close to the wall.
Fits this case: https://www.milwaukeetool.com/Products/48-22-8435 https://www.homedepot.com/p/Milwaukee-PACKOUT-5-Compartments-Small-Parts-Organizer-48-22-8435/303005752 Make a custom organizer for your stuff!
This will securely hold any drill type M18 tool, and should work with most other brands as well. I use these to store my M18 drills, impact wrench, and impact drivers. It even works with other tools that have a pistol grip, such as the…
Magnetic Bit holders for the trays that come with the Milwaukee slim low profile packout compact organizers. Uses 6x2mm magnets https://www.amazon.com/dp/B07KJ9H31P?psc=1&ref=ppx_yo2ov_dt_b_product_details Super glue the magnets on the…
Angled battery holder for Milwaukee. In 2 versions. Version 1 for screwing with wood screws or version 2 for hexagonal screws. Angewinkelter Akkuhalter für Milwaukee In 2 Versionen verfügbar, Version 1 zum festschrauben mittels…
I needed af holder for my M18 batteries in my van, and I wanted it to be easy to print. There is no click lock on the model, the battery is supposed to be held in place by friction mine is printet in ASA but works well vith PLA,PETG,ABS…
Drill holes without the mess! I had it print on the face that touches the wall with supports for 50 degrees.
I couldn't find one I liked so I decided to design my own. I print these in PLA+, 0.28 layer height, 6 walls and 45% infill with a 0.6mm nozzle. Supports everywhere and they break off pretty easy and clean with the right settings. Maybe a…
This is a level holder for the milwaukee packout. I designed this to fit a Milwaukee level, 4' and up. The width and height dimensions it is based off of is 1.4" x 2.75" plus 1mm clearance on all sides. (some levels have a 3" dimension…
I decided to clean up my tools. Started with wall control and then added more metal pegboards later. The pegboards I ended up with have smaller holes so I modified the anchors to suit mine, both are included. These will fit both pegboard…
I printed these with a .8mm nozzle so they are pretty stout.
EDIT: I designed the regular height organizer square bin as well. EDIT2: And the regular height rectangular bin. EDIT3: And I designed a divided regular height rectangular bin with removable dividers as well. EDIT4: Added center bins that…
Milwaukee Shockwave box V 2 Added Chamfer to the ends V 3 Shortened the arms for a tighter fit V4 6 mm hole V5 6,1mm slotted holes for div pegboards
Remixed battery rack. Allows for printing vertically without supports.
Lots of files! You'll most likely want to print something similar to this: 1× Slim_Packout_Long_Cutout_Bin_for_Milwaukee_bit_holders (This goes on top) 1× Intermediate-Bin (This goes on the bottom) Various bit holders: 4×…
Designed a super short nozzle for my M18 Fuel blower to help with cleaning tasks around the shop. People also like these nozzles for drying their cars after washing. I printed at 1.5mm line width using a 0.8mm nozzle and 0.3mm layer…
If you've ever wanted to make use of those Milwaukee M18 18V batteries, you are going to want a solid and clean way to get to the battery terminals. This 3D print provides a plastic plate assembly that slips onto the battery, snapping on…
For handing your Milwaukee Quik-Lok string trimmer head. Print at .15-.2 mm and mount to wall.
Made this simple conversion to be able to keep the M18 Inflator stacked on a Milwaukee Packout. The rubber feet can be reused with an M4 heat set insert and a M4x10 screw. UPDATE 5/18/24: If anyone is interested in purchasing the print…
EDIT: May 2025 These labels have worked pretty well for me but I'm kinda hamfisted and I've managed to break a couple of them so I decided to make a stronger, more rigid version. There's not much left of the original design at this point.…
I had trouble finding one of these files that would fit so i made this one on fusion. 2 regular wood screws to attach to plywood or a cabinet. Its not too tight so easy to get the battery in and out. Its meant to be used on a flat…
Wall mount for Milwakuee 7 in. Rafter Square and 4-1/2 in. Trim Square Set
part bolts into existing belt clip mount (uses m2.5 bolt) no recommended to print in pla , it will shatter or deform . best printed with cf filled nylon or PC . no supports needed
This is a holder for an M18 battery that will attach to the squares on the top of Milwaukee Packout equipment. I was looking for a file and the only one I could find was on Etsy, so I made my own. The fit on the battery is a bit tight if…
EDIT: I have designed 5 additional bins for the organizer center channel, and with those 5 bins - in addition to these three - you can configure the center channel with 5 different bin length combinations. The bins are for purchase in my…
Cable/Cord management system for the Milwaukee Packout. This attaches to the following Packout Tool Boxes: Rolling Tool Box Large Tool Box Tool Box The image above shows a Carol Brand, Froghide Ultra Flex 50ft 12 gauge power cord. You can…
Wall mount for the Milwaukee M18 MBL18 Blower Inspired by https://www.printables.com/model/580193-milwaukee-m18-blower-wall-mount-2724 but did not fit the Blower Model i had. Other mounts in photos M18 Hedge Trimmer…
These are inserts Gridfinity organizer bins for: Milwaukee Packout Low Profile Organizer Milwaukee Packout Low Profile Compact Organizer 2025-10-08 Updates - Added new base plates that no longer require trimming and will fit in the Low…
Check out my YouTube for more creations: https://www.youtube.com/@EvanTennie I wanted to organize a large number of bits in my packout but the models I found were sometimes inconsistent with gripping the bits, needed additional hardware,…
This holder is designed with a lower angle, to fit in a tighter space. So the battery will be pulled out more so than up. The print in picture is printed with Bambu PLA on a Bambu printer.
EDIT: I have designed 5 additional bins for the organizer center channel, and with those 5 bins - in addition to these three - you can configure the center channel with 5 different bin length combinations. The bins are for purchase in my…
I modified the Milwaukee M12 Battery Holder to fit the M12 extended batteries
Hi! Hier ist mein Batterie Halter für die großen Milwaukee M18 Akkus! Ich habe es mit PETG gedruckt und habe Supports zwischen den Schienen gedruckt (siehe Bilder) Ich habe die Version verbessert da noch ein kleiner Fehler sich…
Replacement sides for a Milwaukee Fastback Compact. Change the knife to a custom color or add a logo or text. For example, my buddy wanted one that said Makita! Print recommendations: Layer Height: 0.20mm Infill: 25% Cubic or Gyroid…
The file is FREE, Please press the LIKE button. This is a holder for the Milwaukee M12 battery. The battery will lock in using the tabs on the battery. Mount these under a shelf and clip in your batteries for later use. Enjoy! 11/4/2025…
Polymaker Matte PLA Filament 1.75mm Army Red is a good color match for Milwaukee Updated 1/20/24 - removed a small hole artifact from the middle. Thanks to @MatthewSlay for the heads up. Also added a STEP file
Handy holder for up to six batteries. Protects the terminals from damage in a toolbox/bag, Handy way to get your tools to the project. Will print just fine in PLA, without supports. Enjoy Category: Tool Holders & Boxes
I didn't like the looks of the other tool holders, I like the rounded edges. It works with the belt clip.
Die Halterung für M12 Akkus von Milwaukee ist für die Nutzung mit dem Multiconnect System von @DavidD für Multiboard gedacht. Es gibt ein Modell für die kleinen und eines für die größeren Akkus. Beide Modelle sind so ausgelegt das sie…
Designed to clip onto your existing disk guard. Stays in place with friction/clamping. Will fit most Milwaukee battery powered angle grinders (I use it on an M18 FSAG model). Keep in mind that even though my printed version has a strong…
I have bought way too many Milwaukee tools to store by laying down, and that brought me to design this. I'm nowhere near the first to do this, but all others looked… not good enough for me to print. I've been printing these, along with…
made a insert for the slim packout 43pcs 3/8 impact set with a 1/2 to 3/8 icon reducer also with 1/2, 3/8, & ¼ impact drives from milwaukee it is tight fitting and made so the sockets don't move around. edit: made a v2 version i have yet…
It's self-descriptive. It's here for you to make your own inserts from, altering it however you wish or please. This is for the box with code 4932464082 It was slightly amended due to an implication in a comment that was deleted. Some…
