Counting matching models…
This is a canopy for the BetaFPV Air Tinywhoops, like the Air65 and Air75. The longer tail section allows a lower camera angle to be set. I also made a widening in the area of the right holder to additionally fix the antenna connector. I…
Some whoops that can be made as long or short as you want them to be. The ends are reversible, and you can add as many middle sections between them as you need. They have holes to add the connectors in to help keep the pieces from moving…
-------------------------------------- V3.1 IS HERE--------------------------------------- C hangelog: [2024/12/31] - v3.1 partial upgrade Improved power input cutout fitment Improved exhaust fan cutout Reduced pusher gap Increased width…
Someone in the comments mentioned that original canopy is too thin for TPU so I added 0.5mm thickness for it
the camera mount from the five33 whoop These mounts are designed and used by Team BlueEyes in the Italian Whoop League 30 deg 35 deg 37 deg 40 deg print settings: infill: 100% use tree supports fillament: tpu .2 layer also on thingiverse:…
Say hello to never buying another propeller guard for your cinewhoop :) Update 19.05.2024.: See the upgraded, better version here: https://www.printables.com/model/884159-unbreakable-propeller-guard-for-cinewhoops-upgrade A little back…
After a year of use of my original design I refined it to make the outer ring more flexible but the inner part more rigid and durable. I also shaved off 3 grams! Let me know your experience with these parts in the makes & comments…
Printing Notes: I reduced the perimeters from 3 to 2 to make the text look better. Printed at 0.10mm height. Filament used: Overture Matte Pink PLA Post print additional work: I filled in the lettering with the some nail polish. Make sure…
1S LiPo Storage and Charging Case for up to 30 LiPos. Optimized for the ViFly WhoopStor 3 Charger. Includes a Lid to close it, but I never use it myself. You are fine just using the charging case by itself to organize your LiPos.
I love to fly Tiny/Cine Whoops and the small lipo batteries can easily get damaged or lost when not in use. These have been handy and quite rugged! There are options for 1 - 3s sizes. I will be adding more variants as well. I printed them…
I really liked the lower portion of the WhoopDegen Case designed/remixed by Jron2008 on thingiverse, but was not a fan of the outer box/hinge design, the large screw holes not matching the screw size and needing nuts, and the wasted space…
Storage for 24 1s 300mAh BT2.0 batteries with integrated Whoopstor v3. ..or 12 450mAh Batteries and the Toothstore. To build this you need one M3x8 and an M3 insert (voron standard). Print without support. (2024.04.03 Modell has been…
A box for storing a VIFLY WhoopStore 1s LiPo charger (https://www.viflydrone.com/whoopstor.html) together with a short cable (the included USB-C cable or similar). The lid comes in two versions, with and without text ("VIFLY WhoopStor")…
I designed this protective case for my BetaFPV Meteor65 Acro with extra space for a TBS Crossfire MiniMortal T Antenna, but I guess you can use this case for any kind of 65mm Tiny Whoop - max. height are 39mm, motor screw height not…
I couldn't find a case to fit my Air75 and a v whoopster together. You can also add batteries in rest of the compartment Print suggestions: 15-20% infill Print with flat size at bottom Features: Requires no support. Snap-on fit
Case for using and storing the Whoopstor 3 charger and 6 batteries. Lid is designed to fit underneath the case when in use and has cutouts for charging port and vents to allow charging in place. The fit is a bit tight (0.25mm) so sanding…
This is an ultralight ultrasecure dipole antenna mount for canopies that just use the front holes on the stack. Works on the air65 frame for sure, but will work on any whoop that you can squeeze an antenna between the back brace and aio.…
Simple model to make your Whoopstor ultra slim! Made to fit my Betafpv case insert Assembly: Disassemble the charger Cut down the female-female standoffs to 5.4mm Set aside original bottom plate and 6 other standoffs (will not be needing…
needs four 3mm height by 6mm diameter circle magnets for magnetic lid also needs four 30mm m3 button head bolt printed on prusa mk4 with mmu3
Just added little indicators to easily differentiate between the models
This is a hook meant to slip over the top of a hanging white board to hold the eraser.
Simple one piece plug for Dc and XT60 port for Vifly Whoopstor 3
The attached STL's are for a hexagonal (6x corner pieces) gate and wooden strips with the dimensions of 10x5mm the length of the sticks is variable, I used different lengths to see which one I like best and I settled with 170mm. I use m…
the worst nightmare for a tiny whoop: A FEILD OF LONG GRASS. This is a joke model that tiny whoop enthusiasts can put on their desk. I recommend you to print it with supports but the cool thing is that you dont even have to remove them…
Dust Protection Cap for VIFLY WhoopStor – JST PH 2.0 Connectors This model is a simple but effective dust protection cap designed for the JST PH 2.0 ports on the VIFLY WhoopStor charger. It helps prevent dust, dirt, or debris from…
Mount with existing screws on the charger. Its quite snug, may need a some convincing push in/out at first with a less tuned printer. Onshape link
whoop canopy re-mixed made it slightly taller so its clears electronics
My remix of https://www.thingiverse.com/thing:4792436 to use Small mount to use with the Toothpick PicklePod2 Insta360 holder ( https://www.thingiverse.com/thing:3944156 ). Print Settings Printer: Delta Rafts: No Supports: Yes Infill: 20…
This is gen 2 of my whoopstore battery holder. The appartment next to Whoopstore is for used batties .. but it is not that practical.. please comment and suggest updates :)
40mm duct not unlike the ones seen on jacks3dprinting hope they work well for you! let me know if you need them adjusted
case for vifly whoopstor 3. to speed up the time of preparation for the flight. allows you to charge batteries in the backpack while you get to the spot.
Can't decide whether to fly your 65mm or 75mm whoop? Bring both! This hard case keeps them protected and makes them easy to carry wherever you go. Two storage compartments keep your charged and discharged batteries separated.…
Case for your ViFly Whoopstor V2. Covers up the side ports to ensure dirt stays out so be sure you only need the top ports to charge.
Skadis Mount for VIFLY WhoopStor 3 Keep your workspace tidy and your gear right where you need it! This custom mount allows you to securely attach the VIFLY WhoopStor 3 or SkyRC B6 Neo+ charger to an IKEA Skadis pegboard. No more loose…
I had to edit the screw mounts for better grip to the Flight Controller and the Body and also make the camera scew thicker because there was not enough grip and my camera was rotating when printed out of TPU. - Screw holes have a thinner…
Meteor65 Pro II O4 – Rugged FPV Case 🚁 Everything you need for your Tiny Whoop adventures! I designed this rugged transport case to keep my BETAFPV Meteor65 Pro II O4 , LiPo batteries, and charging equipment organized and protected in one…
used these small but mighty magnets from amazon, a little bit of superglue and a press fit, and they are in there: https://www.amazon.com/dp/B09Q61B559?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 perfect for 65mm 300-32-mah batteries I have…
I use this model to hold two Vifly chargers and power them in parallel from a single power source. Compatability: Suitable for both Whoopstor 3 and Toothstor chargers. Support my work: All of my models are available for free. If you'd…
FREEDOM against stl Nazi tyranny!
Replacement bottom plate for the acrylic bottom plate of the vifly whoopstor
WhoopStor Model Make Your Own Scott Yu-Jan Dock. Be free and remix away! Fight the power! Free Dock stl here https://www.quadsensei.com/product-page/free-stl-vifly-whoopstor-charging-dock-scott-yu-jan-design
Nothing fancy…just a super simple tool to raise your drone when the ground is un-even or you need to raise your props off the ground. You can add pins to the ground to hold it in place, or place rubber bands to hold it to something…
Do you need cheap simple led rings/gates for your races? Vitamins PA Nylon Tube Pneumatic Air (10mm external diameter), for a big loop you need about 2 meters (so order 2 pieces of 10x7): https://ebay.us/KynD1p EL strip with battery power…
This is a HSW compatible storage compartment for A VIFLY WhoopStor 3 or a SkyRC B6 Neo+ or Neo 2 battery charger. @rhaen_3530839's original design is a Skadis mount but I put a Honeycomb mount on it instead. You must use an 'insert-empty'…
I figured mounting the charger on the wall to charge batteries would be convenient—and it totally is!
ENGLISH BELLOW Makerworld link: https://makerworld.com/en/models/1129625#profileId-1129644 LED branka pro Whoopy Branku můžete přichytit pomocí magnetů, našroubovat na stativ, připevnit vázacími pásky nebo pomocí klipů připojit k další.…
Shorter lid will work for when you don't need to carry the charger. The drawer pulls are for easier use of the compartments, no need to dump the whole box to get something.
The Beta FPV twincase on Makerworld is great but they only had hold the hexa or whoopstor v3 chargers. We made an adapter to hold the whoopstor V1. Enjoy. Twincase files.…
I love to fly Tiny/Cine Whoops and the small lipo batteries can easily get damaged or lost when not in use. These have been handy and quite rugged! There are options for 1 - 3s sizes. I will be adding more variants as well. I printed them…
In tinywhoop racing, every last hundredth of a gram counts. But you can't have your camera break in a crash either. You need to find the right balance between durability and weight. That's what the Joker is for. Material: TPU95A. For me,…
I use this model to hold two Vifly chargers and power them in parallel from a single power source. Compatability: Suitable for both Whoopstor 3 and Toothstor chargers. Support my work: All of my models are available for free. If you'd…
A vintage styled TV case for an eyoyo mini monitor that I got from amazon. https://www.amazon.com/dp/B0BNQFYMFS?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1 Plugged a 5.8G Analog receiver from amazon into the monitor. Added…
I noticed that most people had some space on their MFT rails, especially on the side, so I thought of this little motivational sign that fits right into the rail and dogholes. Kept it rather small (2 dogholes) in order to be printable on…
So I needed a way to carry my tinywhoop, and I really liked the U.S. General gridfinity setup that Uncle Jessy showed off. This is just one of the bins that I made for my system.
A vintage styled TV case for an eyoyo mini monitor that I got from amazon. https://www.amazon.com/dp/B0BNQFYMFS?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1 Plugged a 5.8G Analog receiver from amazon into the monitor. Added…
This is a HSW compatible storage compartment for A VIFLY WhoopStor 3 or a SkyRC B6 Neo+ or Neo 2 battery charger. @rhaen_3530839's original design is a Skadis mount but I put a Honeycomb mount on it instead. You must use an 'insert-empty'…
![[Better screw-holes] BetaFPV Air Canopy - For Air65 and Air75 Tinywhoops](https://media.printables.com/media/prints/f5502fc3-d1a1-4daf-b969-8298113e9d2e/images/13729488_bdb2cf81-db19-4906-947d-9d2cbb7b5656_d3d0f7c8-a33b-44b5-9990-82c4666a81f4/20260903_181357.jpg)
