Counting matching models…
Build Videos P1: https://www.youtube.com/watch?v=nPZfvoYlkRc P2: https://www.youtube.com/watch?v=hSb7K_NrlCI Hey everyone! This is my model of the Wingman from Apex Legends, it's pretty accurate, I've made a few videos on how I designed…
STL files to 3D print mold components and PDF files for patterns to make a Medium multitool sheath (patterned to a Leatherman Fuse - also fits a Wingman with clip attached). Finished inside dimensions are: - Medium Multitool 4 x 1.3 x .7”…
Found over at https://sketchfab.com/models/2601297f223a441086c7a44fc34a879d And a special request by Corey http://www.thingiverse.com/ROCKETNERD/about Good luck with printing and post the results : ) Merry Xmas Jace PS I've uploaded all…
Replica of the apex legends wingman.
This is a model i made to be possible to brint without too much struggle. You need supports on the sight and lower front of the model. Dont need to support where the guid pins will go later. You need to glue those two half together. PLA…
I really liked InverseSandwich's design, but I changed it to suit me more moved the belt loop higher, so that the top of the Wingman wont dig into me when I sit down made the bottom slot go higher to make popping the Wingman out easier…
Easy open tab for the leatherman wingman utility knife. I got tired of trying to open it one handed and decided it needed an upgrade. Slight interference fit, meant to be lightly hammered or pressed into place to hold it in. I used a vice…
The PW-Mk.1 or Project Wingman Mark 1 is a fictional fighter jet from the game Project Wingman . This fighter jet has twin Cordium engines, essentially just nuclear engines. For its armaments it has guided rocket pods on along the top and…
For the Wingman Frame Kit and Wingman BNF All meant to be printed in TPU, 0.3mm layer height, ~0.5mm width, no supports.
Gridfinity Leatherman Wingman holder
Cylinder comes out like in the game. Compatible with Lego figures and other figures alike. Print Settings Printer Brand: Creality Printer: Ender 3 Resolution: 200 Infill: 50 Filament: PolyMaker PETG/PLA/ABS Literally anything Notes: Might…
APEX Weapon Set – Wingman Pistol Hey maker! 👋 Get the iconic Wingman Pistol from APEX, redesigned for 3D printing. Features: Optimized for print beds of 20 × 20 × 20 cm or larger. Rebuilt from game files and split into connectable parts…
I really liked InverseSandwich's design, but I changed it to suit me more 1. I move the belt loop higher, so that the top of the Wingman wouldn't dig into me when I sat down 2. I made the bottom slot go higher to make popping the Wingman…
Simple push-fit Multiboard holder for the Leatherman Sidekick and the same-sized Wingman. It may fit the Rev, though I don't have one to try. Intended to be printed upside down without supports.
This works well for the Wingman that I have. I'm not sure if it would work for other tools, but as long as the width is the same it should work. Hook design taken from https://www.printables.com/model/118225-ikea-skadis-fusion-360-models.…
Leatherman Sidekick/Wingman Gridfinity Module This 3D printable Gridfinity module is designed specifically to hold your Leatherman Sidekick or Leatherman Wingman multi-tool. With a precision-fit compartment tailored to the dimensions of…
Replacement Thumbstick made for the Logitech Wingman. Print Settings Printer Brand: Prusa Printer: Mk2.5s Rafts: Doesn't Matter Supports: No Category: Video Games
These are the official designs used to produce the tap handles for Wingman Brewers , a craft brewery located in Tacoma, Washington. While the standard embossed logo version will be available for sale in the brewery's taproom, I have also…
Filament: Eryone Tri-color silk PLA. Resolution: 0.44mm Supports: No
Here's a quick print to transform your Nerf Hammershot into a Wingman, from Apex Legends. It is a mostly reversible mod, the only changes that need to be made is the orange front iron sight needs to be removed. The parts are friction fit;…
I mounted it to my wall via sticky tac, but feel free to to try other meathods Put spacer between the body and the wings when mounting Change Filament twice while printing for color changes Made in Onshape
Xerxes Pi single case with vents to help with passive and active cooling. Includes a front plate and end cap. Can be printed without supports if printed separately from front and end caps. Licence allows for editing so like, edit, and…
Dual Brook converter pod for consolizing a PC setup. Insert two Brook Wingman XB converters, secure case with screws, add USB extensions, connect to PC. Players plug and unplug from pod, most controllers should just work.
A small friction-fit model, which houses the Brook Wingman NS adapter for Nintendo Switch to avoid mechanical stresses due to gravity. This can be an issue especially if you are using the adapter wired with arcadesticks etc. which may…
This replaces the back two spacers on the Fractal Wingman to mount an antenna for my Walksnail 1S VTX. I didn't like that, sometimes, the antenna could fall into the rotor disk, so this should keep it pointed in a useful direction and…
Glue the two halves together and you're able to drop your GPS dongle into the slot and use a split ring to close the gap. Then use a clip to attach it to your beltloop!
Simply remove the golden tabs from the stock battery tray by pressing the two small protruding clips and sliding the metal piece out of the plastic. Then, insert the tabs into the 3D-printed holders. Print in flexible rigid filament ( I…
After suffering handpains from trying to play F-Zero games on my SP, I decided to make a simple grip to provide better ergonomics.
This loupe clips onto an a6000's viewscreen. It allows you to view the screen up close and comfortably when the camera is on a tripod that is low or high. I find it to be very useful. It is very light so it can stay on the screen without…
Remix of Tokyo Dom's antenna mount, modified to fit the TrueRC Singularity Lite 2mm antenna cable (coax with heatshrink) and a small zip tie. Printed in TPU.
Here's a quick print to transform your Nerf Hammershot into a Wingman, from Apex Legends. It is a mostly reversible mod, the only changes that need to be made is the orange front iron sight needs to be removed. The parts are friction fit;…
The Fractal Wingman frame has a camera cage with holes that will accept a small dipole antenna. However, I felt that the antenna was too close to the carbon. I had also experience low link quality at only 1km away, which shouldn't…
I built this Wingman model (https://www.youtube.com/watch?v=8yLk7pH2WKw) and wanted to display it on my wall. I can't drill into my wall so I have to use command strips, which is why there are no screw holes on this. I did not spend a…
3D Print Files in STL format for a Wingman Skin prop blaster This prop is split into 34 parts for easier printing, assembly, and finishing. It has a lot of "wires" around the whole thing I would actually recommend replacing with some…
Remixing another file I found online by jb1970 (https://www.thingiverse.com/thing:6645087) I created this version of the mount for a wall at home. My father liked using his speakers at home for his TV when not at the course, so we created…
Remix of Tokyo Dom's antenna mount, modified to fit the TrueRC Singularity Lite 2mm antenna cable (coax with heatshrink) and a small zip tie. Printed in TPU.
The Fractal Wingman frame has a camera cage with holes that will accept a small dipole antenna. However, I felt that the antenna was too close to the carbon. I had also experience low link quality at only 1km away, which shouldn't…
Slowly working my way through the fortnite models, my youngest son insists are very cool. Still my oldest boy would suggest there not at all, but I think there pretty cool, eitherway ; ) I'm sure someone out there will like them : )…
APEX LEGEND WINGMAN This is a high detail prop model-kit for 3d-printing. This model-kit contains 19 individual parts to ensure as much detail as possible. All parts have orientation indexes for easy assembly. The parts need to be glued;…
TITANFALL 2 WINGMAN This is a high detail prop model-kit for 3d-printing. This model-kit contains 30 individual parts to ensure as much detail as possible. All parts have orientation indexes for easy assembly. The parts need to be glued;…
Here are some of the TPU prints i made for my Fractal Engineering Wingman with Walksnail I originally ordered the 10mm standoff version and madeit fit with the Walksnail VTX and Jhemcu GSF405, but i wasnt happy with the clearances, so i…
This is a simple belt holster for a Leatherman Wingman multi-tool. Fits a max belt width of about 38mm and 5mm thick. V2 allows you to have a little more purchase on the holster when removing the tool.
![Wingman | Apex Legends [Easy Print] w/ Stand](https://media.printables.com/media/prints/1665/images/10571_fce427a2-90e3-4947-9ee5-8dde5f2aa2ec/img_0178.jpeg)
