Counting matching models…
to hang a little bike or run bike to you Thule Chariot use these two hooks. They are plenty strong and hold the bikes securely. The hole and the slot are optional features to use 25mm ratchet straps or elastic straps. print settings:…
Uses screws that are already there under the seat, tested with woom 2 and 3, not sure about other models
Based on @maxelman “Tern GSD Transporteur Rack Hooks for Woom Bikes” I shorten one of the hooks, so on cargo bikes with a lower front the wheel of the kid bike / Woom is not touching the ground. See pictures work out fine. I printed with…
Two sizes: 33mm is for the smaller top tube of a Woom 4 45mm is for a Woom 1
I designed the model to adapt a standard bicycle rear light to a Woom 4 bike.. The new models have a mount under the saddle, which I used for this purpose. There are two versions with different angles. As an option, I generated the rod in…
Kids happen to crash things. Maybe this helps to not have to buy a new bell. Printed with variable layer height on a prusa mk3s.
A colleague requested a replacement for his kid's broken SNAP click-on fender connecter-thingy. Don't know what they're called. Only thing I know is that it's supposed to fit a WOOM bike. edit: now it's been tested I can tell that it's a…
We bought a ``expensive´´ kid bike, and don´t wanted our kid to throw the bike on the ground. Since there were no side stand for this smal kids bike, i designed an adapter for the Original Woom side Stand. I´ve printed it in Filament, but…
The Woom bikes don't have the usual stem where the towing rope could hold onto – with this puck you can tow them anyways without the need to use a carabiner hook to fix the rope. You will need three zip ties to fasten it: two small zip…
Replacement O-ring for the steering limiter yoke sold by Woom for their children's bikes. My self-propelled destruction engine - ahem, toddler - ripped his in half, so we printed a new one. The model isn't exactly complex - just an…
This is kickstand mount for Nami Burn-E if you change suspension from 165 mm -> 150/155 mm. You need: 1) Woom 1+-3 kickstand for kids bike for 150mm, Woom 2-3 kickstand for 155mm 2) M5 inner threads 3) M5 screws
I replaced the very hard to turn Microshift with a lever style rapidfire shift and needed another piece of handlebargrip to fill the empty space. Its for a normal 22mm Diameter Handle. I uploaded the step file so you can make it longer if…
This is remix of “Side stand Adapter for Woom 1 Kid Bike”. This supports M6 nut which is in sell now instead of M5.
The stem of the kids' WOOM bike does not offer a proper hooking point for using the Kommit bike towing system. To use the Kommit bike towing system on a kids' WOOM bike, I have designed this adapter. The kids can independently hook and…
The Woom Go 1 balance bike for children is susceptible to scratches and paint chipping. The uploaded models provide protection for the most sensitive areas - the handlebar grips and the paintwork in the area of the rear wheel. Protector…
Simple tool/spacer to tighten the headset of a Woom (2) bike with an open wrench (or similar) and two tension belts.
Simple rest support for Thule lite bike trailer. To be used with straps up to 25mm wide. Tested on Thule Lite 1 and Lite 2 (double); both Woom 2 and Woom 3 can be fastened. Printed with PETG.
Halterung für einen AirTag am Fahrrad Woom 4
This model is a flag holder for a 6 mm flagpole for a Woom 3 children's bicycle. The holder accommodates a 6 mm flagpole. I printed the part from ABS-GF. PETG was not stable enough for me. This is a flagholder for a 6 mm flagpole. It is…
Kettenblattschutz für das Kinderfahrrad Woom 4. Soll verhindern dass beim treten die Kette mit dem Schuh aus dem Kettenblatt gehoben wird. Der kleine originale Stopper war zu wenig.
I was missing the adjustment screw for the brake lever on my kids' Woom bike, so I made a thumbscrew cap that fits onto a cap head M4x20 allen screw. Also useful for making any kind of caphead allen screw into a thumbscrew. STEP included…
NOTE: The model does not contain the Woom™ logo due to possible trademark issues. Use the PrusaSlicer to add your own custom text or logo ;) What is this: The model is a simple clip-on which holds a Samsung SmartTag, hidden from sight.…
My little one fell and the original broke. this is 100% Copatible. I Printed in black PETG for the flex. Sideways because of the bending of the part.
My kids use it daily to commute to school.
Adapter to carry a Woom 3 Bike. Adapted so that the weight is carried on the handles, and not on the mount. I also added 2 12cm Aluminum rods with m10 treads, so stabilize the mount. But this is not needed. Best use ASA and at least 50%…
Remix of https://www.thingiverse.com/thing:4728452/files for Woom 6 headset (in my Woom 6 inner tube diameter was smaller, so I have redesigned the inner part). I've uses the "outer_collar" from the original project. Works nicely with…
ENGLISH: PLEASE NOTE: There are several versions of the WOOM 2; they differ in their rear-wheel mounting. Please refer to the photos. This stand is designed for the newer "WOOM GO 2" version. This is a stand for the "Woom GO 2" children's…
First version of the adapter to use Decathlon Doll Seat (https://www.decathlon.cz/p/sedacka-pro-panenku/_/R-p-303265) to be used on Woom 3 bike. Decathlon bikes use seatpost with diameter of 25.4 mm, while Woom uses 22 mm. This adapter…
Reflektorhalter vorne passend für WOOM Fahrrad. Gedruckt mit Prusa PETG. Infill 100% Schichthöhe erste Schicht 0.2 Schichthöhe Rest 0.15
I recently upgraded the bike of my kid from a WOOM 3 to a WOOM 4. And yes - they are costly (but with very decent resale vale) and have a tendency to disappear, so enough reasons to hide an Apple AirTag. Unfortunately the saddle did not…
We bought the Woom 4/5 kick stand for our Woom Off 5, and even fully extended the bike would fall over. I made this to make the kick stand a tiny bit longer to account for bigger tires. Perfect fit without adhesive, but I guess it depends…
I made a Thule adapter for 2 of our Trailer. Our Son wanted to be able to pull them himself... fine with me. You will need a m5 Screw to Secure the mount. Free my models 1e2749cc90bef069de
Innerer Durchmesser ist um 1° geneigt
This is a simple taillight adapter for a Woom 5 children's bicycle equipped with a luggage rack. The standard Woom taillights you can order at their shop are made for the seat post and do not fit to the rack you can buy there as well. So…
Keychain for my sons woom bike. Colorchange at 1,6mm height. - Hint: Use the 3mf File.
V Mount for Accessories on Woom 2 Bike
Typically, when a rack is added to a Woom bike the battery powered light mounted to the saddle post is no longer visible. To mitigate this I designed this piece and mounted it to the Woom Original 3 and Woom Explore 4 that my kids ride to…
Woom unicor, just print add some glue and it's redy to use
Sollte in PETG gedruckt werden.
Description This model is the basic model of a snap-on “pop-on” front plate for the Woom bike basket. The basic model consists of a peg for attachment to the bike basket and a 3 mm thick front plate that can be individually designed in…
For the bike trip with my son, the most important thing is to bring enough water. I particularly like the Fidlock magnetic mount bottles and appreciate the technology behind them. I want to mount the bottles on the rear rack of the Woom…
Keep your child's Woom 1 balance bike perfectly organized with this custom-designed, 3D-printable bike stand! Specifically engineered to perfectly cradle the 12-inch front wheel of the Woom 1, this stand prevents the bike from tipping…
You can print both elements separately and glue in the lightning bolt. Then scale the lightning bolt to 98/99% or combine the models in your slicer if you have multicolor printing.
This is a quick design i came up with because one of the brake line clamps of our Woom Go 1 broke. You need slightly longer screw to mount this version.
Requires a Ugreen Fine Track Tag 1x M5x16 mm screw and 4x M3x8 mm
I designed my own version of the WOOMBA, inspired by the Saturday Night Live sketch! This was a personal design exercise, and I’m really happy with how it turned out. The buttons are placeholders, allowing you to swap them out for LEDs…
If the silicone cover of the Woom Glug bottle is broken you can replace it with this cap. The silicone must be completely removed. Then the printed lid can be reattached with hot glue. At least that's how I did it and it works.
Printet in TPU on an older “German Reprap X400” 0.21mm Layer High 0.4mm nozzle. Ive cut of the broken strips from the original part and put the new one between.
Recent Woom bike fenders are not compatible with FollowMe bike carrier axes. Here is a fix.
Fills the gap after replacing original Microshift shift lever to SHIMANO Altus SL-M315. I used Fiberology Fiberflex 30D TPU filement and 30% infill. After the change my daughter is able to change the gears without any difficulties.…
Der Adapter sorgt dafür, dass die Schlosshalterung nicht nach unten wandert. Für die Verschraubung benötigt man zwei M5
I installed the FollowMe on a Woom 4 that has a mudguard. The mudguard clamp no longer had a place to attach, and the FollowMe bolt was too small, so I 3D-printed an adapter sleeve. You have to be a bit careful when sliding it on so you…
Compatibility / Important Note This mount was designed and tested specifically for the Woom GO 2 . I’m not sure whether the frame dimensions are identical across different production years or between different Woom models. Therefore, I…
Recent Woom bike fenders are not compatible with FollowMe bike carrier axes. Here is a fix.
Adapter to carry a Woom 3 Bike. Adapted so that the weight is carried on the handles, and not on the mount. I also added 2 12cm Aluminum rods with m10 treads, so stabilize the mount. But this is not needed. Best use ASA and at least 50%…
The Woom bikes don't have the usual stem where the towing rope could hold onto – with this puck you can tow them anyways without the need to use a carabiner hook to fix the rope. You will need three zip ties to fasten it: two small zip…
