Counting matching models…
I had so much fun making this that I plan on making more similar flying models- but I don't know what I should make next. Another WWI bird like a Sopwith Camel? Something bizarre like a pusher prop F-104 Starfighter? Something else…
---- Grenade MK2 WW2 ---- UPDATE: Small update to the "Head" see "Head_v2". The "Head_v2" version will now slice/print better on the two flanges. Tried to make a Grenade, and as a reference I used the American MK2 fragmentation grenade…
All information can be found here: (Parts, details, etc.) Free Plans 3-D Printed P51D RC Airplane!!! DIY! Make sure to subscribe!!!!! READ! There is a 3mf file at the top, that is saved as a project, so it has stl's inside of it that you…
##### EDIT ##### I added some double sided mounting tape to support the legs, one of the pictures shows placement. I left the wax paper on the side that faces the legs. This greatly increased the stability of the table overall. ##### EDIT…
-Two colors -organic support -0.15 layer height
1:42 Scale French tank from WW1. The turret rotates, as always. Two versions of the hull are included, one with and without the trench rail. I also modeled the round turret instead of the angled one because I think it looks nicer and I…
Detailed soldiers If you like this feel free to check out my other models
There are plenty of M49A2 rounds available but they are all incorrect in one way or another, I have done my best to make a round that is correct in size and detail to a real M49A2, I have designed this to be printed as a sold round, with…
Hi. You maybe know the stowage project by some guy here on thingiverse. Welp this is its buffed version. They are remixes of some crate that i made better and compared it to oficial parametres and things i found exploring the internet for…
1:200 scale model Easy to assemble – the turret clicks onto the hull and can rotate. Just glue the tracks and the back part to the main body. To scale a model from 1:200 to 1:144, you need to use a scaling factor of 138.8% in the slicer…
1:42 Scale German tank from WW1, the only German tank produced during WW1. This design concludes the WW1 line, and all future tanks will be uploaded for sale on CGTrader. It's just one solid piece, no moving details, no assembly required.…
This is a static model of the German V2 Rocket from WWII. Printed as is, it sits at 600mm tall. Parts print in three separate sections. I will be doing a powered version of this model using D & E motors. This is in progress now. The fins…
-Two colors -organic support -0.15 layer height
Jeep Willys au format 1/23. Difficile de faire plus petit en gardant les détails. Une mitrailleuse peut être montée : https://www.printables.com/fr/model/687020-m2-browning-50-bmg-123 Jeep Willys in 1/23 format. Difficult to make smaller…
My kid is interested in WW2 tanks, and asked for this model. Found the model on thingiverse, but the print kept failing, so I split it into smaller parts to remove the need for a lot of scaffolding.
I remixed Focian's awesome stairs and changed a few things. Added steel diamond texture. This does significantly bloat the size of the stl. Removed posts and added holes for magnets instead. I used some superglue to hold the magnets in…
These ladders are to scale with Mattel's WWE Action figures and come in two sizes, corresponding to an 8ft (2,5m) and 12,8ft (3,9m) high ladder when stood up, respectively. Yes, this ladder actually folds! Both heights feature linkages,…
comes in two flavors: the complete briefcase, handle and all, as well as the briefcase and handle separately. (If you want the handle to have a different color. Add a filament change when the lettering comes in, for a two tone effect. The…
The Open Source Watch Winder (OSWW) is an open source high quality, modular, watch winder. For $40*, you can build yourself a 3 watch, watch winder, with user-replaceable parts. Key Features Quiet belt drive Bi-directional winding; winds…
WWE announcer's table that breaks apart. I use 5mm x 3mm magnets to hold it together. The geometry of the table makes it extra tough so doing a power bomb directly on top of the table might not break it apart but jumping off the top rope…
Together with its 7.7 mm variant, the 12.7 mm Breda-SAFAT was probably the most widely used Italian WW2 gun - mounted both in fighter and bomber aircraft and used as an AA and infantry support weapon. It was later used in post-war Spain…
Horten Ho-229 WW2 Era German Flying Wing Fighter Jet
Late-WW2 Era German Fighter Jet Messerschmitt Me-262
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Modeled using Fusion 360, the first ever tank. Took a good while to do but I'm very happy with the results. Two versions are included, one with and without a grenade roof, and each has a variant with thickened guns. Scale 1:42.
1:42 Scale French tank from WW1, this is the early production variant. I won't be making the late version. It's just one solid piece, no moving details, no assembly required. Needs supports. Goes well my Mark V Landship. This time the…
Remixed version of IXPatch's Print in Place chairs to include various WWE / WWF Logos for all of us wrestling fans!
This is just the WWE heavyweight Championship belt. i printed it on my anycubic neo with pla. enlarged it to 105%
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Set of WWII-style infantry soldiers in dynamic combat poses, ideal for wargames, dioramas and military scenes.
tiger 1 tank for better quality use support please help me with downloading and leave a like
For better seating …. V2.1 Small Clamp has been reinforced
WW2 TNT Block as used by US Army, reenactor display prop If you like this and like Reenacting please join my group https://www.thingiverse.com/groups/my-groups I've also added a double stack version and a 2 x half version that joins…
E-100 Tank Model 1:72 This model represents the German E-100 super-heavy tank with several build options: Tracks & Skirts No-skirts version : tracks are attached using 4 connectors . Full-skirts version : tracks already have built-in…
NH36/EBB36 WWG2 mount for PUG I find PUG to be far superior to PG7 mounts, so made this guy. Additionally, the NH36 connector sticks up really high, so this also lowers the cable a bit. This is based off tetsu and Thor's existing canboard…
Prusa Affiliate link: http://www.prusa3d.com/#a_aid=3090 Feel free to check out my website https://www.ar3dprints.com/ All print information is included in a txt file. Hope you enjoy!
Tiny Tank – Sherman M4 1:200 scale model Easy to assemble – the turret clicks onto the hull and can rotate. Just glue the tracks and back part to the main body. Comes in three versions: M4A1 M4A2 M4A3 To scale a model from 1:200 to 1:144,…
PLEASE SHARE ON SOCIAL AND LEAVE A LIKE IF YOU DOWNLOAD. We provide high quality, presupported, miniatures for 3d printing. Easy Print, Easy Paint Checkout all our printable miniatures on:…
A WW2 US soldier in Normandy. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE other minis are available on my Patreon , Cults3D and…
My little brothers wanted a ladder to play with their wwe action figures with. It can be printed with no supports. Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: Yes Supports: Doesn't Matter Resolution: any Infill: 20…
WWE Replica Belt hanger with bottom support. The belt hanging is a replica title and weights about 14lbs. I would recommend mounting these brackets on studs.
20cm bust of Zombie WW2 Soldier. Scales nicely and slices well.
I downloaded this file off of Grabcad. The author of this version is Hans de Ridder who made some changes to the original by Ferdi Kahraman. I repaired some issues to the model and made printing possible and easier. See link…
-Two colors -organic support -0.15 layer height
Wall mounted sign of the new WWE logo. 2 pieces. A base and a cover made using a MMU. The base is printed on its back and the logo is printed face down.
Im uploading my reconstruction of the french battleship Gascogne. I used the World of Warships model as a visual reference, but I didnt copy any ingame content. The model is scaled 1:1. For 1:200 scale use the 0.5% slicer setting and for…
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers
Created two files, one is pre-supported and the other isn't. They are both Resin Friendly and sized at 28mm.
Scale 1:1000 zeppelin, modeled in Fusion 360. There's not a lot of detail but it still looks good. Now I designed thinner struts, 1 mm thick. I wanted to make it 1.5 but many of the details wouldn't work or they would look bad. The…
Marston mat was a landing material used in ww2 by Allied forces. The one in the file is 1:35 you can simply adjust the scale by multiplying the lenght by 35 and then divide it by your scale in Tinkercad or different
Working on a German WW2 hand grenade. This is in 3 parts will not need supports. Will probably change the length of the handle, and make it so it screws together, right now its glue together. I haven't gotten around to printing this yet…
US ARMY MILITARY VEHICLE SHOVEL & AX / AXE - SET SCALE 1/16 Shovel need more modeling work, axe print nice in SLA I dont printed yet becouse my printer as far from me (1,420 KM) soon as possible if you print send me feedback. U.S.…
Little us jeep of world war 2 print-in-place with funcional wheels. Configurations: PLA 0.2-0.28mm layer height 40%infill (recommended) 40-60mm/s No need supports
Relive the classic sound of World War II air raid sirens with this exclusive 3D print model. Designed to actually work, the siren uses 2212 brushless motors with ESCs, controlled by Arduino, allowing speed adjustments, sound effects, and…
Created two files, one is pre-supported and the other isn't. They are both Resin Friendly and sized at 28mm.
Can be printed in one or 2 parts. Printed on 0.16mm layer on a X1C.
Two models of the iconic Spitfire See my other model of an Avro Lancaster:
Created two files, one is pre-supported and the other isn't. They are both Resin Friendly and sized at 28mm.
Inspired by Robert's Lego Minifig Sopwith Camel https://www.printables.com/model/365713-lego-minifig-sopwith-camel-style My first design in Fusion 360 and the result of MANY hours of work I present my version of the Vought F4U Corsair…
Realistic historical display piece perfect for military collectors, tabletop wargaming, or history enthusiasts.
A WWE ring , very easy to print, no supports needed. Print orientation of ring arms pictured. 2xm3 screws, or super glue to fasten each ring arm. Usa whatever material you'd like, but I used PLA-CF for ring arms to increase its mechanical…
WW2 Willys Jeep designed in Fusion 360. I wanted to try my hand at making somewhat detailed tyres.
hello there here is my second tank the american tank m4 sherman i have split it in 4 parts so you can print it easy i have also add the stowage to the vehicle so you can customise it i have a whole 3d printed army of american sherman…
A quick and dirty tweak of therick's WWG2 NH36/EBB36 PUG mount https://www.printables.com/model/968109-wwg2-nh36ebb36-pug-mount to make it fit with a Wristwatch BMG extruder. The original PUG download page (for the gland itself) is at…
Quonset hut for use with Dust 1947 WWII "weird war" miniatures game. Scaled for the 9cm squares, but could also be used with the older 10cm squares. Designed to print without supports, and has locating grooves to make assembly easy. Can…
Had an OEM IDGA gearset laying around and I had nothing else to do with it. Clockwork2 seemed to be unecessarily complex so I opted to butcher WristWatch2 BMG version to make it fit IDGA as it's already fairly similar. Just needed to move…
Description: The SC 50 was a small, general-purpose bomb used by the Luftwaffe in World War II. The bombs were carried by fighter-bombers and bombers, and came in several variants that weighed between 48–55 kg. They could be equipped with…
Instead of metal dog tags, this is what the Red Army used during the second world war for identification. Refered to as "смертный медальон" - roughly "death medallion/locket". This black little bakelite cylinder was carried to contain a…
Summary The ST-AR15 Upper & Lowwer for CYMA Gel-Blaster Attention: !!! RISK IN YOURS !!! !!! 注意你的風險 !!! Gel-blaster "seems" ban in some countries from 2019. I hope your country can still play wargame sport. As our workshop has ceased…
A file from my Pepakura making days that I discovered in Pepakura Designer you can export to .OBJ and in "Windows 10 3DBuilder or 123Design" export to .STL. Unfortunately I don't have the skills yet to improve further on the model, but…
Added a tab to to the Rotary.stl to mount the filament sensor to the guide.
Step up your ladder match game by adding this WWE themed championship title hanger to your action figure collection. It's to scale with the Mattel WWE action figures and comes in two versions (with and without the WWE logo), as well as…
WWI-inspired British Infantryman. Slightly over 2 inches tall. Designed as a toy soldier. This is my attempt to create toy soldiers for the WW1 era.
Created two files, one is pre-supported and the other isn't. They are both Resin Friendly and sized at 28mm.
The original model didn't have an alignment pin, makes it hard to assemble, so I fixed it. V2 follows the original model method of printing the base at 100%. V3 uses 4 20 mm*5.5 mm magnets as weight, use pause at layer to embed the…
Created two files, one is pre-supported and the other isn't. They are both Resin Friendly and sized at 28mm.
UPDATE: Cable relief geometry fix in v5, cable is more centered now. Some other minor geometry fixes. Mount for installing a Bigtreetech BTT EBB36 GEN2 toolhead board on an A4T toolhead using a WWBMG extruder . This is a remix of the…
This is a remix of the MK 2 fragmentation grenade that removes an error that happened to me which caused the grenade to snap along the screw. for this remix. I've changed the grenade body to be printed as one piece. this removes the break…
J'ai utilisé le model sur Thingiverse 8cm PAW-600, par Julian-Silvestri
Scale 1:1000 zeppelin, modeled in Fusion 360. There's not a lot of detail but it still looks good. Print the propeller 4 times and glue them on. 1 goes on the rear of each cabin, and the other 2 go on the struts hanging off the center…
Hello! This model was completely unplanned, in fact i didnt even plan on doing any other figures! But @jonesnet approached me here in DMs and asked if i could make a swimming pilot for his upcoming diorama. And i was like, hmm why not?…
Just a remix of Makers Workshop V2 rocket as a one piece solid model. So you can print it in one print for a shelf model.
Created two files, one is pre-supported and the other isn't. They are both Resin Friendly and sized at 28mm.
Wall mounted sign of the old WWE logo. 2 pieces. A base and a cover made using a MMU. The base is printed on its back and the logo is printed face down.
Created two files, one is pre-supported and the other isn't. They are both Resin Friendly and sized at 28mm.
AFAIK the most common Italian WW2 bomb, used in all of their bombers like the S.79, Z.1007, etc. Scaled 1/72 (assuming the real bomb was 130cm tall). I am not sure about the shape, perhaps looks slightly too slim compared to photos, but…
Created two files, one is pre-supported and the other isn't. They are both Resin Friendly and sized at 28mm.
Now you can reenact the Battle of Britain. See my other model of a Spitfire:
Created two files, one is pre-supported and the other isn't. They are both Resin Friendly and sized at 28mm.
Created two files, one is pre-supported and the other isn't. They are both Resin Friendly and sized at 28mm.
Created two files, one is pre-supported and the other isn't. They are both Resin Friendly and sized at 28mm.
Created two files, one is pre-supported and the other isn't. They are both Resin Friendly and sized at 28mm.
Created two files, one is pre-supported and the other isn't. They are both Resin Friendly and sized at 28mm.
