Counting matching models…
##### EDIT ##### I added some double sided mounting tape to support the legs, one of the pictures shows placement. I left the wax paper on the side that faces the legs. This greatly increased the stability of the table overall. ##### EDIT…
I remixed Focian's awesome stairs and changed a few things. Added steel diamond texture. This does significantly bloat the size of the stl. Removed posts and added holes for magnets instead. I used some superglue to hold the magnets in…
These ladders are to scale with Mattel's WWE Action figures and come in two sizes, corresponding to an 8ft (2,5m) and 12,8ft (3,9m) high ladder when stood up, respectively. Yes, this ladder actually folds! Both heights feature linkages,…
comes in two flavors: the complete briefcase, handle and all, as well as the briefcase and handle separately. (If you want the handle to have a different color. Add a filament change when the lettering comes in, for a two tone effect. The…
WWE announcer's table that breaks apart. I use 5mm x 3mm magnets to hold it together. The geometry of the table makes it extra tough so doing a power bomb directly on top of the table might not break it apart but jumping off the top rope…
Remixed version of IXPatch's Print in Place chairs to include various WWE / WWF Logos for all of us wrestling fans!
This is just the WWE heavyweight Championship belt. i printed it on my anycubic neo with pla. enlarged it to 105%
Prusa Affiliate link: http://www.prusa3d.com/#a_aid=3090 Feel free to check out my website https://www.ar3dprints.com/ All print information is included in a txt file. Hope you enjoy!
My little brothers wanted a ladder to play with their wwe action figures with. It can be printed with no supports. Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: Yes Supports: Doesn't Matter Resolution: any Infill: 20…
WWE Replica Belt hanger with bottom support. The belt hanging is a replica title and weights about 14lbs. I would recommend mounting these brackets on studs.
Wall mounted sign of the new WWE logo. 2 pieces. A base and a cover made using a MMU. The base is printed on its back and the logo is printed face down.
Can be printed in one or 2 parts. Printed on 0.16mm layer on a X1C.
A WWE ring , very easy to print, no supports needed. Print orientation of ring arms pictured. 2xm3 screws, or super glue to fasten each ring arm. Usa whatever material you'd like, but I used PLA-CF for ring arms to increase its mechanical…
Summary The ST-AR15 Upper & Lowwer for CYMA Gel-Blaster Attention: !!! RISK IN YOURS !!! !!! 注意你的風險 !!! Gel-blaster "seems" ban in some countries from 2019. I hope your country can still play wargame sport. As our workshop has ceased…
Step up your ladder match game by adding this WWE themed championship title hanger to your action figure collection. It's to scale with the Mattel WWE action figures and comes in two versions (with and without the WWE logo), as well as…
Wall mounted sign of the old WWE logo. 2 pieces. A base and a cover made using a MMU. The base is printed on its back and the logo is printed face down.
This "LED" barricade is designed to be in scale with the AEW Jazwares and Mattel WWE action figures. Each section clips together and allows you to run LED strip lights as well as slide in printed graphics to light it up to match the show…
My daughter is really into wrestling and this is the logo for Main Event Jey Uso. I couldn't find this online anywhere else, so here ya go! You can use multiple blue filaments for the contrast, but I will be printing just light blue,…
use organic support
I really liked tallman.phd's thumb wrestling ring model but didn't care for having Josef Prusa's face on it, so I remixed it to resemble the WWF ring in the 80s. I also removed the cutout for the handle on the underside of the ring as it…
My son loves all wrestling and wanted a table cover that wasn't specific to WWE. I tried my hand at 3d model editing to remove the logo.
A friend at work requested I make this for him, so I figured I ought to share it with the world too. The base component uses pegs to “snap” the letters and brackets onto, be careful of stringing during printing.
This 3D printed WWE keychain captures the iconic wrestling logo, making it an excellent accessory for fans of the sport.
Need more microphones? Just print them! This modular microphone model includes three different flags: The square one we know and love from back in the day The triangle one that's currently used on Smackdown The round one that's currently…
a tribute to the gretest RIP
Just a sign to print out for a WWE live show
Intro Made for a colleagues, as he had problems with a bought 3d printed version, which didn't had the bottom triangle and the print settings were poorly chosen, for a 3kg+ belt. Filaments: PLA or PETG; I printed in PETG Printed Parts: 2x…
This is a replacement latch for the WWE collapsible ring that is used with WWE action figures. This latch is meant to replace a broken latch or to serve as a more reinforced version of the latch that comes with the set. The catch itself…
This 3D printed WWE keychain captures the iconic wrestling logo, making it an excellent accessory for fans of the sport.
My daughter is really into wrestling and this is the logo for Main Event Jey Uso. I couldn't find this online anywhere else, so here ya go! You can use multiple blue filaments for the contrast, but I will be printing just light blue,…
WWE Royal Rumble Keychain gedruckt mit PETG, 2mm Schichhöhe und 4mm Schichtbreite. Ich Empfehle die oberste schicht zu Bügeln damit die Oberfläche noch besser aussieht.
A card and die holder for the miniature game Wild West Exodus. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Infill: 15 Category: Toys & Games
This is a simple bottle that I designed to fit into wwe action figures hands. Print Settings Printer: New Matter Mod-T Rafts: No Supports: No Resolution: .2 Infill: 10% Category: Playsets
Printed in PETG for strength, and these are a tight fit, so you can get away without having to screw them down 1 will print in about ¾ of an hour.
You'll need 3 M2 inserts and screws per half. Mirror along X axis in slicer for the other half.
