193 models
Printing parameters: Resolution: 0.2 mm Perimeters: 4 Infill: 15% Supports: no Brim: recommended Assembly: Add some corc, rubber or foam at the bottom of the block. When you clamp in sand paper, the blocks will be fixed. Review: Related…
Print approx. €5.82–€7.11 excl. taxPreliminary estimate for one variant
Bonsai training pot (02) round 146x146x70mm, you can use it as a training-pot for your tiny Bonsai or as a flowerpot.
Print approx. €10.34–€12.64 excl. taxPreliminary estimate for one variant
Ersatz für eine alten Ablauf. Einfach zu ersetzen. Kann von Personen betreten werde. Auto oder sehr viel schwereren Gegenständen nicht getestet. Gedruckt in PETG, mit 3 Außenkonturen und 15% Gyros Infill. Außenmaße: 138mm x 138mm x 14mm…
Print approx. €6.26–€7.65 excl. taxPreliminary estimate for PETGSource material: PET
A little support is necessary, even if the pot and feet are printed separately. However, both parts must be glued together. A model has also been added where everything is in one piece, support is required here, too.
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
Replacement for the Playmobil cannon's wheels/axis. The axis is appr. 41 mm long (incl. hub) with a wheel diameter of appr. 14 mm. Original part numbers are 30030600 and 30063460 - depending on the color. In the original design, there is…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
This is a freezing bag dispenser so that you can keep your bags tidy and easy to get. It can fit any plastic bag roll up to a diameter of 75 mm and a length of 140 mm.
Print approx. €12.77–€15.61 excl. taxPreliminary estimate for one variant
I could not find anything matching the size, and being lightweight, after 6 prototypes, that's what I came up with. The idea is to create a photo wall. For now the plan is to use double sided tape. Maybe I'll add a hanger module for the…
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for PETGSource material: PET
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Print approx. €20.15–€24.63 excl. taxPreliminary estimate for one variant
Important updates 2025-02-21: Made a parametrically generated focusing scale , generated as an SVG file using JavaScript, using FFD and helicoid size as parameters. 2025-02-16: Made an illustrated user guide that covers all the quirks of…
This silicagel container holds 250g and is a perfect fit for the NATO ammobox size 7 (~48x24x37cm). Dimensions of the container are: 65 x 140 mm. It requires a somewhat precise printer for the threads (you should be able to reach a…
a rugged box, enjoy. Use 2mm spokes as hinges. Used BumpMesh by CNC Kitchen for texturing https://bumpmesh.com/
I wanted a nice container for my 24x14" playmat for MTG. I designed 2 different versions, locking and magnetic. The magnetic case uses 6x3mm magnets. MTG emblems on top, bottom, and sides. UPDATE - I've gone through a few iterations and…
This is an older design. Please consider also checking out this one created by @ briancmoses : https://www.printables.com/model/1046107-lsi-9300-16i-hba-cooling-fan-shroud This HBA runs pretty hot and I wanted to mount a fan to it instead…
Small desk organizer (1x3 Gridfinity base) to hold pens and related desk paraphernalia: mine holds a pair of scissors, a bunch of pens, nail file, box cutter, and a couple of small picks and screwdriver tools. Reorganizing my desk and…
Cat Food Dispenser for Wet Food Pouches Overview Designed for wet food pouches (~9x14cm) Two sizes: Tight fit and loose fit Features Can be printed without support Compatible with popular wet food brands (e.g. Whiskas) Printing Suitable…
I really like the overall design and the comfortable grip shape of the original. This is my slightly improved version of a sanding block based on PointNemo's design. I printed mine with eSun PLA matte mandarine which has a nice soft…
This project includes cooling brackets for mounting 92 mm Noctua NF‑A9x14 fans to the Snapmaker U1 mainboard and PSU, along with a chamber insert/divider that improves airflow and adds thermal separation inside the electronics bay. Print…
Have some fun shooting your own targets They are 139x139mm just to be sure they fit As we say in Sweden (Sorry, dosen't translate well to english): Skjut inte upp till morgondagen det du kan skjuta ner idag!
I wanted a box with a clean look that presents the litophane prints nicely by giving them a backlight. The box could also be used as a nightlight. One side has a round indentation to feed a cable through. In the pictures you see me using…
Each chain can be printed seperately and fitted together. There is also a 6 piece variant that can be printed in place.
Plate 2 x 14 This set of building pieces has been developed through reverse engineering and is compatible with LEGO® building systems. Please note that this project is entirely independent and is not endorsed, sponsored, or affiliated…
11" x 14" x ¼" picture frame. Comes in parts which are designed to be super glued together. Does not require supports. Supports landscape and portrait without adjustment. If it scales wrong in your slicer, change the scale to 2540%.…
Intention was to have a tire for my gravity autorewinder (MMU). Could buy from Lego seller, but why not make my own tire. Printed in different hardnesses: Blue = TPU 85Sh(A) Black = TPU 60Sh(A), printed at 20-25mm/sec MAX! Red = TPU ca.…
Bitte sorfälltig bis zur letzten Zeile durchlesen: Gedruckte Gehäuse für Sinterbronze Gleitlager in Fest- und Loslagerausführung. Der 14mm CAD-Gehäuse-Bohrungsdurchmesser ist auf 14.10mm Spielmaß konstruiert. Beim Festlager sollte das…
1mm wall thickness Can be printed in PLA or PETG with some overhang artifacts, that noone will ever see 😇 TPU might work as well, but won't be as protective for the lens. Suitable for Foxeer Toothless2 nano (Starlight) camera (14 mm wide,…
Based on the rough working principle of the most popular self watering planters on this website. Walls are thick enough so no leaks occur (tested this myself, sadly I no longer have access to the final prints) Theoretically it's possible…
Bonsai pot 31 rectangular beveled 199x149x56mm, Support is necessary, even if the pot and feet are printed separately. However, both parts must be glued together. A model has also been added where everything is in one piece, support is…
NV-AA1-09 Airflow Amplifier specified for NF-A9X14 92mm Fan, with a custom support and two fixing points with M3 screws
BIG news on 18.07.2026: Software version V2.0.0 available! WordClock 14x14 Classic received its biggest update yet. I fully rewrote the configuration portal and added lots of new features and improvements to the software. To name a few of…
Bonsai display table (No. 07) rectangular ornamented 200x140x28mm, best for bonsais with rectangular or oval pots. Feel free to scale up or down until you like the result and it suits your tree.
If You have 17x17 cm pellet trap and want to use 14x14cm Air Rifle or Air Pistol targets - print this (preferably in PETG). It's very slim, so it won't ricochet.
Disclaimer: This mod requiring you to remove the cover of your AC power supply and you will need to deal with AC power wiring. If you don't know what you're doing I strongly advise to get help from experienced electrician. Risk of fire…
Adjusted the size to use it with my sandpaper set from Amazon: https://www.amazon.de/gp/product/B07GWDBMWG/
Bonsai pot 24 rectangular ornaments 213x143x50mm, no support is required if pot and feet are printed separately. However, both parts must then be glued together. A model has also been added where everything is in one piece, support is…
Hamster Tunnel Category: Pets
Bonsai pot 28 oval collar 180x140x41mm, no support is required if pot and feet are printed separately. However, both parts must then be glued together. A model has also been added where everything is in one piece, support is required here.
Customized version of https://www.thingiverse.com/thing:2507177 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2507177 Instructions Using the following options: inside_width = 40 inside_length = 140…
2x ausdrucken M4x30 schraube rein, fertig! PETG oder PLA oder ABS oder ASA Nicht mehr Lieferbar, daher selbst gezeichnet: https://www.ebay.de/itm/334562419307
Fan bracket to fit 2x140mm fans to PNY GeForce RTX 5080 card. Can be attached to radiator using original screws
A simple Ball Canopy design for my 3" Toothpick.. It's for 14x14mm (nano) FPV cam... You can put a LED insid of it to get a great effect... Print it on TPU for better results.. Updated on 06/01/2020: Added a 19x19mm Version Category: Hobby
Gimbal protectors for the Spektrum iX14+. May also fit other iX models (not tested). Application: Place the gimbal protectors onto the gimbals from above. Print Settings: Printer: Creality K1 Nozzle: 0.4 mm Material: Creality Hyper PLA…
So this was my first remix on thingiverse :) Original design had only 1 holder for LM2596 buck converter, but locally I could only find LM2596S and wanted to fit more than 1 inside the cover. That's how this remix was born. Improvements…
I wanted to push more air into my SuperMicro 836 server. I modeled this so I can have 3x140mm fans pushing air inwards, through the HDD-drive cages. It is a push fit onto the case, and is kept in place by the side screw of the case it…
This is my second (and probably my last) iteration on the bottom cover and fan of my FlashForge Adventurer 3 (Monoprice Voxel). A few months ago I shared a similar design for 40mm and 80mm fans. Those improve the airflow around the…
For printing tips/advice: https://github.com/TonyBrobston/yet-another-smart-vent/blob/master/docs/VENT_PRINTING.md Check out the GitHub project for more information. https://github.com/TonyBrobston/yet-another-smart-vent
Stabiles Scharnier in den Abmessungen 100x55x14(6) L-B-H Achse Inbusschraube M5x50 + Mutter PLA oder PETG 100% Infill
Say goodbye to boring tissue boxes and hello to this printable tissue box cover! Measuring at a perfect size of 14x14x14, our cover is not only practical but stylish too. Made for the modern home or office to match any décor. But that's…
Highlights Wire spool for equipment / hookup wire. Can hold approx 15m of 22AWG wire (although this will depend on how thick the insulation is). Designed to fit in this spool holder . Print I used Sunlu PLA+. Model FreeCAD model file is…
Simple shallow box wth many uses. Me used it in kitched for some spices and utensils. Could be scalled. Print instructions Printer brand : Creality Printer model : Ender 3 v2 Rafts : NO Supports : NO Resolution : 0.2 Infill : 15 Filament…
you'll need two of the things - they are exactly mirrored. had to cut it based on the build volume of my genius. a little CA glue in between them, two screws to the bottom of the case, two screws to the middle fan. works like a charm :)
A basket with a honeycomb pattern, measuring 145x85x45mm. If you download the project, please like and follow my account :)
Thanks to Nixxon999 for the remix and kuehmayer for the original design! I closed the top holes so that there will be a (hopefully) better airflow in the PSU. The Fan should be mounted to blow the air out of the case, so the holes can…
I wanted to make this for my brother in-law. I liked the previous model he posted with the logos but couldn't find it in the even split style. The third picture shows has a modification i made for my brother in law but the file does not…
Crochet support en 80x145x20 pour tout type d'outils.
Just another PSU fan cover for E3PRO Meanwell LRS 350 24V. I did not like any model so I made this one from scratch with some Witcher features, but uploaded “classic” version for not Witcher fans. Use supports. Tested with 92x25mm Noctua…
3mm x 14mm dowel pins. I made these because I needed pins to hold the bearings in place on my BCARs, but they can be used with anything that needs them. makes 32 pins.
Abflusssieb 140X140mm An alle Downloader, die keine BOTS sind: Über ein Make, ein Like oder einen Kommentar freue ich mich sehr! Auch (konstruktive) Kritik oder Erfahrungsaustausch ist willkommen! Bitte beachtet auch meine Designs auf…
Dispensador de bebidas para latas de diámetro 58 mm y un largo de 145 mm Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.2 Infill: 50 Filament: FERVI ESENCIAL PLA BLANCO HUESO Notes: Apoyos…
Print two of these, print two more mirrored. Plop them down into a IKEA samla, the one that is 39x28x14cm (Article number 401.029.78). They will neatly divide the space into 8 compartments.…
Remix of the side boxes with different sizes (120 mm and 140 mm length) for 2.6 kg spools. There are various tool holders that can be placed freely and positioned variably. Remix aus den Seitenboxen mit unterschiedlicher Größe(120mm und…
Recommended print settings PETG Nozzle: 0.4 Layers: 0,10 - 0.15 Infill: between 100% Perimeters: 3 Bottom/Top Layers: 5 SUPPORTS NOT NEEDED Like the design? Please leave a “like” …. ❤ ….. Feel free to follow me …. ✅ ….. I am glad about…
Lagerdummy für Vespa V50-125 KULU 17,1x46,9x14 Damit kann die Kurbelwelle probeweise und ohne Kraftaufwand im Motorgehäuse montiert werden. Hiermit ist ein Messen für z.B. Steuerzeiten möglich.
Hello. This is for a Tissue Box.
A very minimalistic picture frame for 4x6 (100x148mm) pictures. It has multiple mounting holes for pins or nails, depending on if you want to mount it portrait, landscape, at a slight tilt, as a chain, etc. The Frame uses barely any…
We placed a cat flap in our door, but now that we're moving out the landlord wants us to close it up. Therefore I made this ventilation grate, which can be used for closing any sort of large hole that you want to remain ventilated.…
This Remix based on SethBon's LED Light Bar. I changed only the dimensions for the alu extrusion to 7x14mm.
Made these for use in hard to reach areas on my CNC mill, vises, and work fixtures and such.
Hello This is the adaptor that enables you to use almost every Orbea road bike that uses a 12x142mm thru-axle on a Wahoo Kickr Snap trainer . The design is taken from the original Wahoo Kickr Snap 12x142mm Thru Axle fine Adaptor , with…
Classic box for storing tools or plastic parts for XL top profile. For installation on the XL top profile. Dimensions: 80x140x25mm two models available, one with a separator.
most of the stuff ive downloaded and printed for my lathe has not worked an is usually way to small for the parts so ive just been making my own models for everything i want an now its the gear set that came with my lathe. looks like most…
The case accommodates a 14x14 heatsink to dissipate heat effectively. The bright LED from the small hole was annoying for me during the night. So, I created two versions, one with and one without the LED hole.
For mounting with double-sided tape
It was originally made for Corsair Carbide Air 540 top, but should be usable on any 2x140mm (280mm) fan holes. Print two of them and use the lip to adjust the gap if there is any. Use filters that look like that (search Ebay for “140mm…
Friend gave me this painting, and I wanted to make a frame for it. Did a bunch of little test prints to get the dimensions right and clips working. You can see all the earlier iterations in the skp file. Printed it with 4 pieces,…
Different version of a calibration cube. The cube is hollow and saves you filament. Size is 14x14x14 mm. With the letters of PRUSA and a smiley. Happy Printing :)
i downloaded an printed a couple different holders for the extra set of jaws that came with my lathe an every single one i printed was too small even tho the pictures shows the same machine or one that was suppose to be the same size so i…
Ein Blindstopfen für Löcher(12x14mm) in TPU
La Crosse thermo humidity tx141th sensor shield cover. I printed the main body upside down with no supports on my Bambu Lab X1 Carbon printer.
A simple mount for Teltonika RutX14 router/modem with mounting holes. You have to print: InnerClamp OuterClamp The other two files are for those who want to modify Category: Office
OpenIPC 14x14 camera covert to 19x19mm mount dock add ND filter dock
Dummyhub for 12x142mm thru axle. Category: Sport & Outdoors
Lagerdummy für VespaV50 LIMA 20,1x46,9x14 Damit kann die Kurbelwelle probeweise und ohne Kraftaufwand im Motorgehäuse montiert werden. Hiermit ist ein Messen für z.B. Steuerzeiten möglich.
Lid made for a 92mm fan, specifically NF-A9x14, for the BTT M5p box that @Raziel_163191 designed This was request from one of my patrons Haven't tested it, but I made two models, one with the original thickness, and a second with a 5mm…
2 kleinere Grundplatten für Blokus. 10x10 und 14x14, super für kurze 2 Spieler Runden mit nur 2 Farben. Standard Druckeinstellungen, gibt nichts zu beachten.
Small box that I use for electronic parts (resistors, LEDs etc.)
This minimalist photo frame is designed for 100x148mm prints (like Canon Selphy photo paper). Prints in just 1.5 hours (Prusa XL, no supports) Ultra-light, low-material design to keep costs and waste down Includes stand for portrait and…
Ein einfacher, schnell druckbarer Einsatz für jeden Kugelfang mit 14x14cm Zielscheiben damit man auf Streichhölzer oder Zahnstocher schießen kann. Der Abstand zwischen den Streichhölzern / Zahnstochern beträgt 10mm, sollte Bedarf an mehr…
I needed hinges that could open to a wide angle of 240° (180° on one side and up to 60° on the other side). Hinges are 50x140mm. Here, I’m offering this if someone finds it useful. Modeled in Autodesk Fusion.
A panoramic, medium format, 6x14 film camera the weights only 1.625 lbs (737 grams)! Can it be true? Yes it can with compact 50+ year old wide angle large format lens and a 3D printer.…
Card & Cardboard Cutting Jig – 10x14cm Precision Template Description: Easily cut cards and cardboard to a perfect 10cm by 14cm size with this durable cutting jig. Ideal for trading card projects, arts & crafts, and prototyping, this jig…
simple drawer to put in your pc where the disk drive would normally go
Important notes! PLEASE ADHERE TO ALL GUIDELINES TO GET TEH BEST OPTICAL RESULTS Print narrow side (lens side) down on the printed Use ironing on all top surfaces Add organic auto supports Layer height: 0.1mm Use m2 heat inserts, 3mm tall…
Noctua 92mm x 14mm fan case for Minix NEO Z100-0dB. https://noctua.at/en/products/fan/nf-a9x14-pwm https://www.minix.com.hk/products/z100-0db-fanless-n100-mini-pc The fan is connected to a USB port (5v).
Organizer bins sized to fit the Flambeau tackle cases sold at Walmart.
made this for my Ikea alex desk you need to cutout a hole of 145x286 I soldert a simple usb cable to power them when I turn on the system
Print for mounting Noctua NF-A9x14 fans (frame removed) to PowerColor 7800 XT Fighter GPU (potentially other models as well, not tested).
Fan Grill Cover For 140x140mm fans. Printed with PETG 0.2 layer 0.4 nozzle
You need two nuts (M5) and two screws to attatch the mount propperly. The holes are 4.8mm wide (approximatly M5/4.480 mm). The height of the mount is 55mm. The holes are built 0.32mm to wide for a better fit.
