94 models
I designed this model to squeeze a bit more performance out of the Thermalright AXP90-x47 CPU cooler in the FormD T1 v2 case. The duct prevents re-circulation and ingestion of hot air into the cooler and can provide some passive cooling…
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for PETGSource material: PET
The IO Shield that comes with the X470D4U motherboard does not fit the SuperMicro SC512 series chassis. This solves that problem. This was modelled with a SC512F-350B chassis. Print instructions You may need to slightly shave with a sharp…
Print approx. €1.16–€1.42 excl. taxPreliminary estimate for one variant
This is a fan duct to go in between the side panel of the Dan A4 H2O and the Thermalright AXP-90 X47 Copper Cooler. Without this, the hot air of the CPU and PSU recirculate in the CPU cooler. This made my 5800X3D drops by 7c since it can…
Print approx. €0.81–€0.98 excl. taxPreliminary estimate for one variant
Intended to be used in the Formd T1 case in 3 slot configuration with the air cooling holy trinity: Thermalright AXP-x47 Full Copper Noctua NF-A9x14 Noctua NA-FD1 The pegs are designed to be friction fit and clear the fan retainer clips.…
I designed this conversion adapter to mount a 120mm fan I had on hand because I didn't like the appearance of the stock fan included with the AXP90-X47. Required other than printed parts: 4x M3x5x4mm heat-set Inserts 4x M3 screws,…
Helps to prevent hot air from recirculating into the CPU cooler fan. The internal chamber of my case get very hot, even with a 120mm exhaust fan installed. On my Terra, it reduces CPU temperatures by upwards of 13C. Before installing this…
Liteweight remixed version with zero gap between radiator and fan body, 25mm fans support in 3 slot mode, precise strong mount, support Corsair Venegance memory sticks and similar height even with shift brackets for AM5
High clearance front and rear and 4 link conversion set of links for the SCX24 Lexus GX470 and Deadbolt (rear links will not fit Deadbolt, see linked original for rear links that will fit). There are two versions of front links - standard…
Lexus GX470 Backup Camera Mount This model is a simple 3D printable mount for attaching an aftermarket backup camera to the OEM mounting location on a 2006 GX 470 SUV. The mount was designed for use with this " NATIKA Backup Camera IP69K…
Die komplette Besteckeinlage ergibt sich aus je 2 großen und 2 kleinen Einzelteilen . Der Verbinder ist optional. Achtung: Die Einzelteile sind recht groß, prüft daher den max. Druckbereich eures Druckbetts***. Her die Maße der einzelnen…
UPDATED 1/12/2026 - Included bracket for the MSI B850 Edge TI board (uses coarse fan screws) UPDATED 1/11/2026 - STL file updated to 5.5mm offset instead of 3mm downward - Fusion file updated to have parametric adjustment for vertical and…
I modeled this shield after the the dimensions of the motherboard. It fits perfectly on the board and in the case. It is a bit bigger on the ports opening than the original metal one but it still looks nice and quality. I have made it…
I HAVE NOT TESTED THIS SIZE YET, PLEASE LET ME KNOW IF IT NEEDS ADJUSTMENT Printable high clearance links for the Axial SCX24 micro crawler platform. They are loosely based on the Injora Aluminum High Clearance Links and inspired by the…
The boxes were printed in PLA with normal settings (.4 nozzle, .2 mm layer). The plain box was printed in transparent PLA with Gyroid infill. The pillars box may need some support or not, depending on your printer. Decide at own risk ;)…
A small and simple fan duct for the X47 cooler from thermalright. made for the S300 case (i.e. Shiny snake S300 and the other names the case is sold under). Slots in tight on the cooling fan and makes it so that hot air doesn't…
Reloading tray for the 6x47 Lapua. Print using your choice of material and the appropriate settings. Use supports for the handle areas. With such a large bed contact area, corner lifting may occur as a result of cooling. If this occurs, a…
Some Thermalright AXP models bracket conflicts with Asus board design. It's possible to flip the bracket over but in some cases there is not enough clearance space to do this (You need about ~12mm standoffs/clearance). As an alternative,…
A very easy adapter to use a 120mm fan on the AXP90-x47 in the FormD T1 V1.1 case that mounts to the case instead of the cooler. It is important that the fan sits directly on the cooler. I had to remove some decorative shrouds to fit the…
This is a Cutlery Divider for Kitchen Drawers with 37cmx47cmx7cm inner measurements (ish). It has compartments for Chopsticks, mixed long tools, mixed short tools, small spoons, big spoons, butter knifes, forks, and additional long…
Useful for power washing, scrubbing, cleaning, and painting the housing without letting any contaminants get inside. Also contains the residual gear oil so it doesn't leak everywhere. Note: The driver's side axle plug fits into the axle…
I need to be able to drive my LX470 while I rebuild the front differential. This plug seals off the backside of the hub where the axle would usually go, protecting the bearings and splines. To install, I put 1 wrap of Gorilla tape around…
I modeled this shield after the the dimensions of the motherboard. It fits perfectly on the board and in the case. It is a bit bigger on the ports opening than the original metal one but it still looks nice and quality. I have made it…
porte savon en 2 parties a coller . facile a imprimer coller les 2 pièces a la super glue pour savon de 80x47mm trous d'évacuation de l'eau et surélevé Category: Bathroom
You need two nuts (M5) and two screws to attatch the mount propperly. The holes are 4.8mm wide (approximatly M5/4.480 mm). The height of the mount is 55mm. The holes are built 0.32mm to wide for a better fit.
This is a modification of a model by Greyman . This version contains one flat side for builds which need more clearance above the CPU fan. See the original model for more details.
Sony PX470 Voice Recorder Case and Pole Mound for Insta360 poles 24mm and 31mm 24mm is for the standard insta360 invisible stick. 31mm is for the insta360 invisible tripod stick. Print Settings Printer Brand: Creality Printer: CR-10…
You can buy these airtight boxes on AliExpress: "3D Printer Filament DryBox Storage". I redesigned the holder for them because I really didn't like the standard one. A heavy TPU spool didn't want to rotate on it at all. I found cheap…
Floor plug/cover for 2006 Lexus LX470 3rd row seats. Prob fits other years. Similar to P/N: 72918-60010-A1. Could have bought an OEM part for $10, but thought I'd try.
Box for small items (90x47x25mm) the box consists of three parts and can hold all small items that need to be protected. The print itself does not require any supports, and the different parts can be produced in a short time in any colour…
Are you like me working in construction? Or maybe you are a handyman? Or a skilled hobbyist? Well, then I've got something for you. Brand new inlay/organizer for 50x47 shims/spacers. They are very common size (at least in the…
Labelled loading block with both Solid and Vase Mode versions. Category: Tool Holders & Boxes
Labelled loading block with both Solid and Vase Mode versions. Category: Tool Holders & Boxes
This may work for other sony recorders that use the same sized enclosure but I have not tested that. it is a pretty tight fit so it may require a bit of size adjustment depending on your printer and material.
These boxes have twice the print time of Single Spring Latch Ammo Boxes found here: https://www.printables.com/@brass_ring/collections/176715 Version 2 has these improved features: round cartridge holes recessed latch and hinges for…
You can buy these airtight boxes on AliExpress: "3D Printer Filament DryBox Storage". I redesigned the holder for them because I really didn't like the standard one. A heavy TPU spool didn't want to rotate on it at all. I found cheap…
Box for small items (90x47x25mm) the box consists of three parts and can hold all small items that need to be protected. The print itself does not require any supports, and the different parts can be produced in a short time in any colour…
I modeled this shield after the the dimensions of the motherboard. It fits perfectly on the board and in the case. It is a bit bigger on the ports opening than the original metal one but it still looks nice and quality. I have made it…
These boxes have twice the print time of Double Spring/Snap Latch Ammo Boxes found here: https://www.printables.com/@brass_ring/collections/176714 Version 2 has these improved features: round cartridge holes recessed latch and hinges for…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly Look in my Ammo Boxes Collection…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly Look in my Ammo Boxes Collection…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly Look in my Ammo Boxes Collection…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly Look in my Ammo Boxes Collection…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly Look in my Ammo Boxes Collection…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly Look in my Ammo Boxes Collection…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor Look…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor Look…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor Look…
The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. This version has these improved features:…
The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. This version has these improved features:…
The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. This version has these improved features:…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly The Snap Latch snaps into a locked state when it is pressed towards the box…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly The Snap Latch snaps into a locked state when it is pressed towards the box…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly The Snap Latch snaps into a locked state when it is pressed towards the box…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor The…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor The…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor The…
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier…
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier…
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier…
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab.…
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab.…
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab.…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly Look in my Ammo Boxes Collection…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly Look in my Ammo Boxes Collection…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly Look in my Ammo Boxes Collection…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly Look in my Ammo Boxes Collection…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly either Spring Latch or Snap Latch either square or round dividers Look in…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly Look in my Ammo Boxes Collection…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly The Snap Latch snaps into a locked state when it is pressed towards the box…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly The Snap Latch snaps into a locked state when it is pressed towards the box…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly The Snap Latch snaps into a locked state when it is pressed towards the box…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly The Snap Latch snaps into a locked state when it is pressed towards the box…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly The Snap Latch snaps into a locked state when it is pressed towards the box…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly The Snap Latch snaps into a locked state when it is pressed towards the box…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
This version has these improved features: text for multicolor ramped hinge fixture for easier assembly Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with…
This version has these improved features: text for multicolor ramped hinge fixture for easier assembly Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with…
This version has these improved features: text for multicolor ramped hinge fixture for easier assembly Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with…
These boxes have twice the print time of Single Spring Latch Ammo Boxes found here: https://www.printables.com/@brass_ring/collections/176715 Version 2 has these improved features: round cartridge holes recessed latch and hinges for…
These boxes have twice the print time of Single Spring Latch Ammo Boxes found here: https://www.printables.com/@brass_ring/collections/176715 Version 2 has these improved features: round cartridge holes recessed latch and hinges for…
These boxes have twice the print time of Single Spring Latch Ammo Boxes found here: https://www.printables.com/@brass_ring/collections/176715 Version 2 has these improved features: round cartridge holes recessed latch and hinges for…
These boxes have twice the print time of Double Snap Latch Ammo Boxes found here: https://www.printables.com/@brass_ring/collections/519398 Version 2 has these improved features: round cartridge holes recessed latch and hinges for…
These boxes have twice the print time of Double Snap Latch Ammo Boxes found here: https://www.printables.com/@brass_ring/collections/519398 Version 2 has these improved features: round cartridge holes recessed latch and hinges for…
I designed a simple outline of the Lexus GX470 (Toyota Land Cruiser Prado) It is easily able to be hung on a wall, or can also stand alone on a flat surface
Lexus LX470 Wall Art, can be scaled easily and can be hung or stand alone
Keychain of the front of the Lexus GX470. I've used it for quite a while without any concern about the durability of the finer parts. Printed with 0.2mm nozzle.
