15 models
-I recommend printing from PETG with 100% infill. -The part is not symmetrical, you will need to reflect the 2nd half in the slicer. -I use Hobbywing 65A G2, most likely it will fit other ESC
Can be printed without supports. Wires protection must be printed in vertical orientation
The original iFlight XL10 GPS holder is for GPS modules with smaller antennas. I used the Foxeer M10Q-250 which has a bigger size of 25x25x8. This adapter fits the original end part from iFlight. Print at an angle (see pictures).
XL10 V6 Antenna mounting for the lumineer AXII DUALITY HD o3 antenna, that retains the XT60 mounting. This mount supports the original GPS mount and my GPS mount created for the GEPRC M1025-DQ gps. Print the Tube itself in something…
This TPU part holds the ExpressLRS receiver, beeper and vertical antenna on a iFlight XL10 frame.
This TPU part holds the back antenna (2.4GHz ExpressLRS) on a iFlight XL10 frame. Print on the side (see pictures).
TPU part to fix the anti-spark module in a iFlight XL10.
Removable stack protector for the XL10 V6, with infinite strap adjustment. Designed with ABS in mind, although it should work for other filaments. Vapor smoothing suggested.
Slightly chunkier front bumper for the XL10 V6. Uses stock hardware.
Based heavily on the 15mm mount by AsTroBot, but modeled from scratch by comparing the two 3D files side by side. Basically the same design, but for two zip ties instead of one.
Basically the same as the stock receiver mount, but slightly bigger so it can fit a Crossfire Diversity receiver.
can switch gps holder. just let me know. using tpu 95A
TPU part to fix the anti-spark module in a iFlight XL10.
This TPU part holds the back antenna (2.4GHz ExpressLRS) on a iFlight XL10 frame. Print on the side (see pictures).
