29 models
Specifically designed for the XM1 but should fit the PR900W and the Stormrider as they are essentially the same rifle. The problem that I was having is one of a wandering zero after transporting the rifle in a soft case. You can, of…
More to be updated, assembly should be the same as my first model Getting real tired bruh give me some time to make a guide
Specifically designed for the XM1 but should fit the PR900W and the Stormrider as they are essentially the same rifle. The problem that I was having is one of a wandering zero after transporting the rifle in a soft case. You can, of…
Box for dart storage, best for half length dart. 5*8 storage. Box for UDL 12 CA shotgun shell storage. 4*5 storage. Category: Sport & Outdoors
Custom shell for UDL XM1014 foam dart blaster. There print options: One-piece: print the whole shell in one piece Two-piece: print shell case and the head separately Three-piece: Shell case, shell head and the seal insert Print guide: For…
Airsoft Muzzle device inspired by the infamous Muzzle Device used on the XM177E2. Attaches via M14LH threads. Print Settings i used: Printer: Prusa MK3S+ Prusament PLA 0.15mm Layer Height 100% Infill If you need anything, feel free to…
Launcher it self has many playable features: Working barrel action with locking mechanism. Adjustable sight as the real thing. Barrel that you can fit grenade in. Basically everything as the original gun except for the firing control…
uses m3 x 35mm screw AR mag release spring or similar m3 brass insert
its XM1014for DUMMY 13 print with support
Funcional Airsoft grenade launcher parts for my replica of xm148. I chosen a different style of mechanism for this project. This gun using striker system thats not common for airsoft launchers. I dont know if it is a batter system or not…
Holder for Milwaukee batteries, added 2 M12 battery case.
The LID 3d-model has NO text! The text can easily be added with Prusa Slicer :-)
Shell Rack for UDL XM1014 (Benelli M4) blaster. Just replace the stock picatinny rail with this print. Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: PolyMaker PLA Category: Sport & Outdoors
XM1584 DC-DC Step Down Power Supply case need cheap XM1584 module like this : https://aliexpress.com/item/4000500042973.html ------ Happy Print to the whole community :)
The stock reloading tube has a capacity of 5 shells. With this simple cap spacer, you are able to reload one more shell - up to 6 shells. It's just a simple piece to print and a very simple solution. In my case the 3.5mm height works…
Airsoftový granátomet M203 od Tokyo Marui je určen pouze pro AEG zbraně typu M16/M4/XM177. Manuální XM177E2 má navíc v předpažbí natahovací páku, sloužící k rychlejšímu natahování. Tato konverze řeší oba problémy. Stálo by za to ji ještě…
Super 90 Blaster From Rainbow 6 Siege (For UDL XM1014) Attention: !!! RISK IN YOURS !!! !!! 注意你的風險 !!! Gel-blaster "seems" ban in some countries from 2019. I hope your country can still play wargame sport. As our workshop has ceased…
English : ───────── This is a case for the XM1854 stepdown mini buck found here at Aliexpress https://s.free.fr/8PSupxEF The pcb fit firmly on the base. Just push it. There are room for solder's mounds beneath the pcb. There is a hole in…
A single piece Nerf Ultra Shell for the XM1014 Nerf firing shotgun
Add even more heft to move the center of gravity even more toward the base by pressing three M10 nuts into the inlets at the base of the figures. Use some glue if the nuts sits not tight enough. If you print this on an FDM printer: Scale…
XM1014 CS2 charm, designed to add it to yours bag/keys based on the gun model from game Counter-Strike 2 Remember to scale it up before print!
Main body can print in PLA, PETG, etc. I used PLA + Gasket MUST be printed in TPU Stl's already in the intended print orientation. You can get away with no supports, but the cutout for the gasket will need some minor stringing trimmed off.
To adjust the bracket, it is necessary to use M3x10 bolts and M3 nuts.
Glue the lightbar to it. I printed it in PETG: 3 sidewalls, 3 top layers, 3 bottom layers and 10%infill. should be ready in less then 10min
Created for Liquid Stands Z-Style Stand , but should be compatible with any similarly generic support beams (36x36mm). Print Settings Can be printed with any setting. Optimized recommendation configuration provided below. Nozzle: 0.6mm…
Funcional Airsoft grenade launcher parts for my replica of xm148. I chosen a different style of mechanism for this project. This gun using striker system thats not common for airsoft launchers. I dont know if it is a batter system or not…
Created for Liquid Stands Z-Style Stand , but should be compatible with any similarly generic support beams (36x36mm). Print Settings Can be printed with any setting. Optimized recommendation configuration provided below. Nozzle: 0.6mm…
XM1014 CS2 charm, designed to add it to yours bag/keys based on the gun model from game Counter-Strike 2 Remember to scale it up before print!
