Counting matching models…
Vaporesso XROS 3 Series Drip Tip This is a remix of a model made by CHAOSXSPIRIT that can be found here. I have changed the drip tips design by making it smaller so it prints faster, is more comfortable, and uses less filament. I have…
Another take at a working tip replacement for a Vaporesso XROS series pod. Printed as is, tip down, and with a brim. Might need post processing to smooth sharp corners. (Fixed this on the current version v4) Lemme know if this works for…
For Vaporesso XROS Standard and Mini. Same pod. Just chuck it at your printer and go. Got no time for it. Maybe will polish it up a bit later.
This model is a sleeve/case designed for the Vaporesso XROS 3 Mini vape. There are openings for airflow, charging port and LED. Printed on my Ender 3 V2 with 0.28 Layer height and 0.5mm line width. Tollerance is thight but works for me.
I designed this product so I would not have to fiddle with a cable to charge my XROS 3 vaped during the day, and had a place to store my extra pods. The dock utilizes the USB-C cable that comes included with the XROS 3 so that there are…
Please comment, rate, and post a make! This is a case and dock for the Vaporesso Xros 3 vape. The case is friction fit and will need a little encouragement the first time you slip it on. The dock has a hole for inserting the USB cable…
Please comment, rate, and post a make! Be sure to check out my other models! A relatively simple case for the Vaporesso XROS Pro vape. Having used this brand for an extended period of time, I know that the USB port can get worn…
When chilling to some music or bashing the laptop keyboard I like to make a quick swap of an empty pod for a full one. Here are simple stands to hold a Vaporesso Xros 3 or Xros Pro with slots for two spare pods, designed in Tinkercad. I…
Printed in Geeetech TPU 95A. Using PLA or PETG might be a little too snug. The hole fits a necklace cord with a maximum diameter of 3mm. The cord I used has a 2mm diameter, but the part that connects the necklace together is 3mm, so I…
Designed to work with Vaporesso Xros Series Devices, should work with XROS 1, 2, and 3, Mini or Non-Mini, etc… Has holes for magnets and can be stacked on top of other organizers but not underneath them. I have not included the ‘XROS’…
Store a Vaporesso using Gridfinity 1x1 Grid. Modified model to store two 10ml bottles of liquid on a Gridfinit here .
Vaporesso XROS mini holder to hang around nek. Prints in 40 min. Use PLA. You just need your own keyring and lanyard. You can charge it while in the holder.
a case for vaporesso xros cube case with ring for more grip need support for the ring printed fine with pla or petg
Stand vor Vaporesso Xros where you can hold your device, four Heads an Liquids
Store a Vaporesso and two 10ml bottles using Gridfinity 2x1 Grid. For just a holder without bottle storage using a Gridfinity 1x1 grid here .
I've got a couple spare Vaporesso Xros batteries, and needed somewhere to store them. I'm using them with the Vaporesso Xros Mini, but it should fit V1-V3 mini, and I think the larger sizes as well (If I'm wrong about that, do let me…
Simple stand/holder for the Vaporesso Xros Pro.
Created a stand to hold my Vaporesso XROS 4 and pods
So I really like lanyards for my salt nicotine vapes, but i always break the attachment points so I came up with this sleeve very quickly using Orca Slicer and @ UpstateDesigns Simple Beveled ring.
Stand for 8 10ml e-liquid + xros 3 nano + oxva xlim pro
This is a custom piece, designed to meet the request of holding 2x Aspire AVP Cube and 2x Vaporesso XROS Mini's along with 4 10ml bottles. This is simply a ‘thing’ to keep these objects tidy on the users desk. I added some 3m non slip…
My Xros 4 is a fine vape, but would occasionally turn on in my pocket I made this slim case to cover the button and save my coils. fast print, low filament use, friction fit with no hardware.
This stl is a remix to load 1 and have 2 or 3 vapers or cartridges organized.
simple Vaporesso XROS family stand Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 20 Category: Tool Holders & Boxes
GEPRC Vapor X Pro XR4 Gemini Xrossband Dual-Band ExpressLRS Receiver Front Antennna Holder
3d printed gasket for vaporesso xros 3 vape
A modified case for the XROS Pro vape device
gridfinity stand for 3 packs of xros pods
Vaporesso Xros 3 Nano SKADIS 0.20mm layer height Supports needed for pegs & LED cutout Best if printed in a upright orientation.
Stand for a vape, pretty straightforward print. No supports. Will work for any vape that is roughly 24.6x14.5mm Prints fine in PLA, can be made very quickly due to simple geometry. I added 10 bottom layers and printed it at 10% gyroid…
Designed to be a very strong hub for a frame of 2" PVC pipe. If you put eyes on him he kind of looks like a beetle. Print with Teflon for worst results.
Basic Vaporesso Xros Pro Holder. Printed on CC, Standard Profile, 0,4mm nozzle.
Protection cap for Vaporesso XROS 5 Mini coil pod socket. Best printed with PETG at: 0.95 flow 230C slow (around 70% of typical speed or even slower) 0.10mm It allows to achieve smooth edges and best fit. UPD: added an o-ring (13x16)…
The source marked this model as adult content.
All standard settings, no support or adhesion needed, it's Print In Place so print it, and use it!
Designed for XROS pods with 11.7x22mm in the lower part of the tank that will fit into the holder, the wider shoulder being at least 10mm from the base of the pod. I use XROS CoreX 3.0, but 2.0 is the same size and may well be the same…
I wanted a way to charge up my XROS 5 Mini without having to fiddle around with the charging cable and use both hands. The ultimate in laziness, but why not? :o) This is a bit "niche", I admit. Only the Vaporesso XROS 5 Mini will fit in…
Engraved with the name NORMA, and an N. If you can make your own with your name and post it as a remix of this one!!
Stand vor Vaporesso Xros where you can hold your device, four Heads an Liquids
Vasporesso Xros 5 Stand- Device will stand upright or tilted back Scale Z Axis only if you want deeper chambers, do not change X or Y axis as the holes fit the device. Printed so that when charging, the screen faces backwards, flip…
This Vapresso Xros Mini cover/case has finger grips to stop you from accidentally blocking the airflow there is also a cutout for the charging cable. Would recommend printing in TPU Step file included should you wish to customize your vape
If you keep multiple flavors in pods, but don't want them all over the place.
I made this to charge my ZFold3 Galaxy watch6 and xros vape on my nightstand
Prints exactly the same as the original by 4lan9.
I sometimes want to carry a spare vape pod in my bag, but find the blister packs they come in get damaged easily. I was trying to design something for the purpose but am a total beginner at 3D design, so when I came across this toothbrush…
