Counting matching models…
Two models are available: One that supports case-less AND my case. The other changes the location of the charge port to be higher, if you're using a case that needs it. Print the stand on its side, hole facing up. No supports needed. For…
The moment I saw people 3D printing cases for the Xteink X4, I knew I had to make a Pokédex case! This case can be 3D printed as-is, or in multicolour if you want the full Pokédex look! Since I don't have access to a multicolour printer,…
Foldable case for ereader Xteink X4. Available versions Magnetic closure (D10x2mm) Magnetic closure (D10x2mm) + Magsafe on lid No magnets The hinge is fixed using paper clips, as detailed below
I love the look of the Xteink X4 Eink reader RetroCase 4c from Makerworld https://makerworld.com/en/models/2657757-xteink-x4-full-body-case#profileId-2939295 This is a simple snap on cover I made for it. I printed mine with PLA
XTEINK X3 CHARGING STAND I took the recent arrival of my X3 e-ink reader as a reason to learn some 3D modeling. Inspired by this model from Buckie92 I built a magnetic charging dock for the XTEINK X3. My (completely from the ground…
Just a rough model of the Xteink X3 and X4 eink readers to check their size before buying. I modelled these based on the information on the website and the pictures I found. I don't have the devices so I cannot check how accurate they…
XteInk X4 E-Reader Case - Flat Back & MagSafe Collection A custom-designed protective case for the XteInk X4 e-reader with multiple MagSafe/Qi2 compatibility options. This collection includes a base flat-back model and three…
I wanted a basic case to protect my Xteink X4 from drops and scrapes, and prevent unintended button presses, but all the ones I found were either overcomplicated or didn't cover all the corners/buttons. I made this simple one and have…
Cables nowadays are way too stiff and the X4 Pro's pogo connector isn't up to the task. This stand uses only components that come in the box and an additional 8x1mm completely optional round magnet. Print with tree supports
A slim case to protect the screen of the Xteink X4 reader. STEP file included, happy remixing
The XTEINK is a really small and neat e-book reader, but it could possibly do with some lighting. Here is an adapter that allows you to easily attach an OSDUE LED Book-light to the XTEINK using the magnetic ring supplied with the XTEINK.…
choose and print one flip cover, print case and hinge... All credits to zorian 22 for his great case :)
Xteink X4 Retrocase 4c vertical stand. This is a stand if you have the Retrocase 4c and you want to stand up your device.
Simple remix of the DUMB wallet, adding a cutout for magsafe-style magnetic stickers. Made this specifically for the XTEINK X4 and the magnet stickers that come with it, but it could work with many things. Just the 3 card version because…
Specifically designed with this light in mind: https://www.amazon.com/dp/B0CL68P76W But it's a generic book light so I'm sure this will work with others.
This is a mockup of XTEINK X4 small e-book to create your own case.
Xteink X4 Stand A stand that holds the Xteink X4 a bit higher up, closer to eye level. It should fit most metal rings, including the Xteink brand ones that come with the device.
I made a cover for the Xteink X3 retrocase. This is to cover and protect your screen
Print and add in the hole of the lamp holder an adhesive pad to fit the original xteink lamp. To be used with the flip cover without stoppers in my collection
A nice retrocase 4c led light attachment someone shared online I slightly adapted it to make the Retrocase 4c modular.
There is a right hand and left hand model available. It will probably work with the X3 and the X4 pro, but I haven't tested with those models.
the X4 can't be set on the back of an iPhone 17 Pro since the camera and the magsafe are closer than in the 17 Pro Max with this plate and the two metal rings that come with the X4, you can have it along with the phone, although it will…
This is a simple model of the pogo connector from the Xteink X3 which can be used to make cutouts for the charger. I included the blend file.
A simple protective case for your beloved e-reader, featuring a special slot for a MagSafe magnet. And attach to your Fairphone 6! If you want read at night, use my ClickLight case! ClickLight! And attach and deatch!
A simple protective case for your beloved e-reader, featuring a special slot for a MagSafe magnet. If you want read at night, use my ClickLight case! ClickLight! And attach and deatch!
I found holding the xteink for long periods was just a bit uncomfortable when the light was mounted on the back, so I made a simple case and attached the booklight holder to the back. I added a ring mount inside the case, for those who…
A charging cradle for the XTEink X4 Pro. There are 2 files - The Cradle Base - A Cables-stop friction-block (optional) For the friction pin you will likely have to sand it a bit cause I made it 1mm bigger than the slot. Note: This is…
The right size to store original xteink lamp and my lamp holder for the flip cover,no stoppers,in my collection. To print in two colours pause the print, unload the filamenti, load the new One and resume ( if you do not have a multicolor…
Check the original model for more info on Magsafe versions, I just didn't make all the Magsafe variations, only the flatback version.
I printed "Xteink X4 sliding cover w/ Strap and lanyard" https://www.printables.com/model/1742729-xteink-x4-slim-sliding-cover and loved it! There was just one little issue - dust getting into the space between the cover and X4 when I…
This is a case for the Xteink X3 with print in place hinges, no assembly necessary
I found holding the xteink for long periods was just a bit uncomfortable when the light was mounted on the back, so I made a simple case and attached the booklight holder to the back. I added a ring mount inside the case, for those who…
choose and print one flip cover, print case and hinge... All credits to zorian 22 for his great case :)
This is a case for the eink reader Xteink X4. I printed it using TPU. No support needed. Since the lid is printed flat on the bed, it will have some resistance and want to stay opened. After printing, I used a heat gun to heat it up while…
A clip on case I made that is compatible with the official "book" case Xteink provides for the X4.
This is a case for the Xteink X3 with print in place hinges, no assembly necessary
Remix to allow flat mounting and good magnetic adhesion with the following: Magsafe compatible magnet sticker: https://www.amazon.com.au/dp/B0989K3P3M iPhone 16 Pro case - Spigen Rugged Armor MagFit I printed in PETG, 0.2mm layers. I…
choose and print one flip cover, print case and hinge... All credits to zorian 22 for his great case :)
An adapter for the Xteink X4 e-book reader to the Modular Mounting System, so you can read in bed. Use the [Crosspoint BLE firmware]( https://github.com/thedrunkpenguin/crosspoint-reader-ble ) and a Bluetooth page turner.
A lamp shade for the official Xteink light you can buy off their site. I don't know how to use blender so if you can make it better that'd be dope.
The only thing that was missing from my xteink was a light when reading in the dark as it had no back light. I had some LED filament strip on hand so I designing my light around that. It powered by a recycled lipo from a vape. Full build…
1 - lanyard holes 2 - access to USB port and pushing point 3 - slot for an NFC tag 4 - holes and space for an elastic strap I have made space for adhesive lining. you have to glue the strap in its slot before adding the lining.
I received an XTEINK X3 for my birthday and wanted to carry it around with my keys, but I am scared that the screen may crack easily even with the case, so I whipped this up real quick on OnShape. This attaches to the e-reader over the…
A simple protective case for your beloved e-reader, featuring a special slot for a MagSafe magnet. If you want read at night, use my ClickLight case! ClickLight! And attach and deatch!
