Counting matching models…
*******ALPHA VERSION****** K9 COMPANION is a posable dog figurine ready to become your toys best friend. This model is a remix to the DUMMY 13 model by soozafone . The parts are designed from the ground up but keep the same joint…
Is your 600% Dummy13 feeling lonely? Does he need a friend? Why not print him a 600% K9! Using my same Dummy13 Joints+ system, I remixed TClears Dummy13 K9 model from printables to be printable at larger scales. I printed mine at 600%…
THANK YOU ALL FOR 1700+ DOWNLOADS! I never thought this would get this much attention let alone that many downloads. 2023 has been a turbulent year for me, I started 3D printing, moved far away from my hometown and had many troubles to…
If you want to print dummy 13 in 500% scale it is good start to test your printer\filament. This model has print-in-place fingers (500% scale is not easy to assemble) Modified finger joints (added fuzzy skin for better grip) Palm-finger…
Connecting the small parts with a one-layer-high line. This helps to adhere the small starting surfaces to the bed. Much easier to remove than a brim. Prusa project files are available to customize further.
Simply design of an old CRT TV as MINI 13 or LUCKY13, “face” is swapable with allen key, include a blank, heart, smile faces, use the blank one to create your own emotion and share your MAKE. print in layer height 0.15mm, first layer…
在转换到板版后，它更容易保存，可以作为礼物送给孩子，就像乐高一样。
Roger! Roger! Have you always dreamed of commanding the galaxy's largest droid army, but found yourself a little short on galactic credits? Thanks to Baktoid Combat Automata, it's now possible! You can now field a legion of droids without…
Please keep all these small parts away from children and pets, some parts have pointy ends, and they could be a choking hazard too. Make or use these at your own risk. If you find these for sale on Amazon , Etsy or anywhere else, they are…
These are remixed posable hands for Easy 13. I used designs from 2 other models to create an updated file for Easy 13. The smaller the hands the less chance the design will function as it should. Print at 200% or higher for better…
Everything was printed at 0.15mm resolution, the “ChestRig” file requires supports, and should replace the “00B04 skin chest 2” piece, the rest of the stl don't requiere support. The Magazines can be fit into the chest rig too, if there…
In honour of Alien: Earth being released, please meet the Dummy13 Xenomorph! Printed & assembeled the same as the OG Dummy13 with an added tail & leg section, and of course the iconic Xenomorph head. The frame is printed with no supports,…
Dummy 13 X Clone Trooper Phase I Update 23/02/2025 : New CloneTrooper Phase 2 print profiles! Do you recognize him? Here is my version of the Clone Trooper Phase I These clone soldiers, created from the DNA of bounty hunter Jango Fett,…
My version of female dummy 13 model. Photo of 150% scaled model Attributions - Excellent DUMMY 13 by @soozafone - Type-F body parts by @KeyarCabico - Thigh improvement by @MVDesign
Ripped from the games, connected with the Dummy13 weapon grip. Yun Seong's sword Lizardman's Axe Cervantes' sword Sophitia's sword Soul Edge classic (may have ruined the geometry, oh well) Will add other ones next.
"It is my solemn and important duty to bring happiness , light , and joy into your world when you're being a dour idiot." - Sylphrena, from Oathbringer, by Brandon Sanderson I based this model on the Dragonsteel “Forged Foam” models to…
“Accept the pain, but don't accept that you deserved it.” - Dalinar Kholin , from Oathbringer by Brandon Sanderson A neat little, to-scale (roughly, at least, Alethi heights are weird to have to work with) Oathbringer, to include the…
I tried to make a Horse based on the frame system of Dummy13. I used a horse skeleton as a base and reproduced all limbs and joints. The neck seems to be too small (as you can see in one of the pictures the horse can't reach the ground to…
I saw the kit-bash digitigrade legs using the K9 mid-leg and I was not happy with the proportions. I remixed the mid-leg frame piece to match the original Dummy13 shin length. For digitigrade legs (walking on “toes”) I used the standard…
Dummy13 Titan Camera man Hammer Dummy 13 Cameraman skibidi toilet
DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 The use of Hatsune Miku & Kasane Teto is based on a PCL license .
IWI Negev from CSGO, resized and altered to fit Dummy13
NOTE: This model is created to fit quite snug, so in order to account for filament shrinkage you might have to scale the model up to 101 or 102% Print with .12 layer thickness. enable tree supports. Make sure to clean the inside of the…
I really liked the exosuits from nostalgic robotech cyclones. So I just tinkercaded them with lucky13's easy skins. It was fun, but time consuming. And I haven't finished the legs yet. So maybe in the summer. Also, I normally print this…
Its a helmet! The TPU insert is optional, but it makes the helmet look like it has padding on the inside and makes the helmet pressure fit on the head.
Deutsch: Update 1.2: Ich habe eine zweite Variante hinzugefügt, die nun keinen Metallring, sondern MagSafe-Magnete nutzt (inklusive der Orientierungshilfe) und zudem noch zwei kleine Löcher zum anbringen einer Handschlaufe hat. Version 1…
Please keep all these small parts away from children and pets, some parts have pointy ends, and they could be a choking hazard too. Make or use these at your own risk. Dummy13 may not have the right stuff to go to the moon, but that's OK,…
Just a custom head for Easy13 for fun
Joker Head Dummy 13/Lucky13
Mar. 02, 2025 V1.0: First release on printables Based on DUMMY 13 1.0 - Nov. 2024 Dummy 13 Version 1.0 © 2024 by Gabriel Rosiak is licensed under CC BY 4.0 I designed them for my upcoming projects. They look very similar to Venom's claws.…
Originally, dummy 13 and bows are not combined with each other. I thought it would be cool if the dummy and the bow met, so I modified and remixed that part Dummy 13 is based on 150% scale (because I've already made it) The bow was…
used Blender to make hair with bangs and a ponytail. Use supports. Sorry for the fine detail EDIT: added an isosphere on the part where the ponytail connects to the head because the ponytail snapped off in a test print
very simple model, i used the official low poly game model as a reference. Use in conjunction with Longmarch9's armor set- https://www.printables.com/model/1116352-dummy-13-signalis-lstr-512-set-beta/files
A simple bow that you can print in flexible filament. I guess you could try printing with PLA or something and just bending it. I dunno. I printed this in Some old Ninjaflex Semiflex. Printed with 100% infill. I did it with no brim. Stick…
Helldivers II Mech using Dummy 13 joints and frames
I recently came across a machine gun that someone had created for the 13 Series. It was way too detailed and difficult to print for someone with a standard nozzle and settings. This is less detailed and much easier to print, and it looks…
I'm sorry For the rest of the figure: The parts for the figure can be found here . If you have trouble with bed adhesion for the tiny parts and don't want to use a brim, try this model .
I really like BaGoon's mod parts for Lucky13. They reminded me a lot of EVA-01 from Neon Genesis Evangelion. So I remixed the shoulders a bit and merged two to make one and then modified the original chest, shin, and forearm parts from…
sparepart spacer if you lost your Shimano crank spacers. nothing special
The Gladius can be split upright with 10mm brim or horizontally lying. After printing, the two halves of the gladius are glued together with second glue. The helmets can be printed split without support and brime. After printing, the two…
Runner version for the display stand
The Voron 2.4 AWD Gantry introduces a groundbreaking design that sets it apart from other all-wheel-drive (AWD) systems available in the market. Here’s what makes it unique. 1. Shorter Belt Paths for Greater Efficiency: Unlike other…
Articulated animal company character compatible with dummy13 hands and weapons! I have included the hand files from the dummy13 model by soozafone. I recommend printing in PETG with supports. It will work with PLA but the joints will wear…
print dummy13 first after you done that print backpack, 6 ropes, 2 grabpacks and 2 hands for full grabpack print parts of grabpack how I showed on images or grabpack will break after 1 minuta Im gonna model other hands after I finish…
The model should be scaled for the regular sized Lucky13 at 100% I printed my Lucky13 at 150% so I hope the calculations are correct for the scale down. If not, I'll chug a cocoa for each remodel I do. (I'm not a coffee person, I consume…
Model of an Anti Tank Rocket. The model can be used in different versions by exchanging the removable end and front caps respectively for rocket components and launch flame. So the modes transport, target acquisition and launch mode can…
Model/UVs - RedRogueXIII I resized it to fit the 13s hands.
File size is for 200%. Scale down to 50% for original Lucky13.
shotgun ultrakill for dummy13 V1/V2 articulated: https://cults3d.com/:3117128
Double-sided parallel switches track compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2 Mini…
Scale Guide: Yellow: 100% Blue: 150% Red: 200% Mici's thigh frame and thigh armor link: https://www.printables.com/model/729164-dummy-13-mini-me-aka-dummy-10-v03-beta/files
The immortal Dummy13, laid out to print in the Halot One all parts in a single print. Only the pointing hands included due to space restrictions.
My Daughter really wanted a female Easy13 as I've made a lot of them. Chest front from @Eleton and his Lucky 13 Female. All the amazing work is from Soozafone and the Chest from E-leton I just cobbled it together and feminized the waist…
My smile is full of blades. This is a Legendary Hunter sword sized and changed to fit in the hand of a dummy13 Print settings are 20% infill and print flat
Trendy dorky dad shoes for Dummy 13
I wasn't quite happy with the shape of my Dummy 13's thighs after switching to the official feminine torso, and I was equally dissatisfied with the rough patch jobs others had uploaded to the internet. My solution; to take matters into my…
Hier sind ein Paar Köpfe der Familie Simpson für die 13er Familie von Soozafone. Ich habe auch die kompletten Skins für die hier aufgeführten Charaktere für Mini 13 zum herunterladen bei meinen anderen Entwürfen. Hinweis zum Zusammenbau:…
“Hello! Would you like to destroy some evil today?” - Nightblood in Words of Radiance by Brandon Sanderson. Roughly to scale (Nightblood specifically varies quite a bit according to the best guesses of measurement), this version of…
I was having a multitude of issues with the original film carrier that came with the Valoi Easy120 system, so I made my own. This carrier design is much less susceptible to having the negatives warp when they are fed through, which would…
An alternate hairstyle for Dummy13. Maybe you can paint it to resemble Harley Quinn? Unlike the previous one, I turned off the Subdivision Surface modifier so it looks really blocky. Might be easier to print like this EDIT: added some…
The model was printed in PLA or PETG, 0,4mm nozzle. So that the partly very small parts (rotors, drone ) adhere to the print bed, the 1st layer is printed at 12mm/s and, if necessary, the print speed is reduced to 50% via the fine…
Please give attribution to the creator of the original file, this is just a 3mf of it for multiple few hour prints
This 3d chappie has been modded for use on the Dummy13 figure. I haven't printed it at the original dummy 13 scale as it loses a lot of detail, but I have made it for a scaled up version (175- 400). I did use petg and supports. Drop a pic…
These are a new forearm and wrist for the Lucky13 Figure to give them more range of motion for gestures. Now proses such as prayer, a Kamehamea, or anything that needed the wrists to turn beyond the initial range is available.
Feb. 24, 2025 V1.0b9: First release on printables Based on DUMMY 13 1.0 - Nov. 2024 Dummy 13 Version 1.0 © 2024 by Gabriel Rosiak is licensed under CC BY 4.0 DUMMY 13 loves COMIC CON! So I have started to design a whole series of…
12. Aug. 2024 V1.0: First release Based on DUMMY 13 Beta - Oct. 2023 DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 Someone on MakerWorld kindly asked me to design some cheerleader stuff, most…
May, 31, 2024 V1.2: First release Based on DUMMY 13 Beta - Oct. 2023 DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed under CC BY 4.0 DUMMY 13 loves COMIC CON! So I have started to design a whole series of characters…
This is the replica model of iconic boat WALLY power 118. Hope you like it. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2~0.15 Infill: %10~%15 Filament: NA NA NA Notes: Be…
I made the sword from The Witcher if you don't think it looks like the sword that's fine I haven't read the books played the game or watched the show I modeled it off of pictures and took some creative liberties. print at 2mm layer…
A Bolt Pistol is a smaller version of the Bolter in standard use by the Space Marines. Now wieldable by the 13 Series. Remixed from Lance Greene's Boltgun model. Print upside down with supports
Just simple tennis racket in scale, for joint figures. Should be printed with 0.2mm nozzle! Have fun!
Simple box to house the ZY12PDN USB-C PD Trigger. I use it to power some of my 9V retro computers and have put the trigger inline with a switch. Holes in the lid for access to the voltage change button and a small opening so you can see…
Simple hook remix to fit the Dummy 13 accessory pin. Allows for a good spot to store/display all your dummy13 color/combinations.
esqueleto robot tipo dummy13 y lucky13(dummy2) la diferencia entre ambos son las uniones de sus armaduras, ambos poseen mejoras en las uniones de hombro y piernas. puedes encontrar accesorios y armaduras en la siguiente coleccion…
Scream Mask for Dummy13 A simple Scream Mask for Dummy 13 , the absolute fantastic work from Lucky 13 Toys/soozafone. I created a simple shape which fits over the original head and add a scream mask face. For easy printing and less color…
Revolver for Dummy13 V1 articulated: https://cults3d.com/:3117128
Some laspistols and lasguns if you want to bake a potato
its XM1014for DUMMY 13 print with support
Thanks soozafone for lucky13, this is really the most posable figure out there. I added a shoe piece and hand piece that works with Legos. I had to merge the ankle joint and the shoe to make it work, else the lego stud will collide with…
Tommy gun for luck13 or easy13, for all your mafia needs! (btw it doesnt need supports to print, can use pla or petg.)
I used the Dummy13 by 'soozafone 593185' Beta Files, combined with the Sword, Shield, & 'Right Hand' from the Medieval Knight '674707' remix by ‘Martin’; as found in their respective depositories. My 3D parts were created in ABS on a K1…
Mount for Ruida 6445 controller angled mount for Y1200 Laser cutter/engraver
printing instruction make sure to flip the helmet upside down. I checked the “support” checkbox in cura and kept everything else default. but you can try printing it without support
I am using a KlickyNG probe on a Voron Stealthburner on my Mercury 1.1. Based on an Ender 5 pro . I ran in to an issue integrating this into my machine. First, the stock Klicky probe mount extended too far over the print bed, greatly…
UMP45 from CSGO. Altered and resized for fitting Dummy13. Can also fit Mini, Lucky and Easy13.
Customized version of http://www.thingiverse.com/thing:343343 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=343343 Instructions Using the following options: profile = 3 screws_disposition = 0 nut_shape =…
Jun., 01., 2024 V1.1: Removed protruding parts inside the mask Minor changes to the lettering May, 30., 2024 V1.0: First release Based on DUMMY 13 Beta - Oct. 2023 DUMMY 13 Printable Jointed Figure © 2023 by Lucky 13 Toys is licensed…
The hair style is similar to Chun Li. You got a heavy fringe and two oxhorn hair balls on each side of the head. Edited the original Dummy13 head using Blender. Have fun. Print upside down with supports. P.S. Maybe I should have used…
Today i bring you 3 different heads for your dummy13. Printed at 140% The side panels head is mean to be printed vertically, and it comes with built in supports (just twist it and it should come off) The walls covered by the panels might…
One of my first independent works, if you find serious shortcomings, please report them. The model is far from perfect, but it is more than suitable for printing. Just in case, the assembly instructions: I hope you will succeed! We will…
Adapted the joint to fit old style hand for the Easy13. Mirror for both hands.
The diving equipment for Dummy13 consists of gas cylinders, fins, head with snorkel and diving goggles and a harpoon. The parts are printed from PLA, 0.15mm layer height and 0.4mm nozzle. Files for printing the head with an MMU are included
