Counting matching models…
English description (German description below): This is a replacement handle for the Hager 90SL FZ505 switch cabinet. Printing: I printed the part with a Bambu Lab P1S, 0.4mm nozzle, layer height 0.2mm from PLA.Handle-V0 +…
WZ5005 power supply box. If you are unfamiliar with the mains supply voltage, consult a qualified electrician. Both power supplies are Meanwell LRS-100-24 adjusted to 27v. connected in series a total of 54v. A choke filter can optionally…
Der Fix, wird einfach in die linke Fahrspur geklemmt. Er erhöht die Spur um ca. 2mm, so das der kleine Seitenmob nicht mehr an der Wanne hängen bleibt und der Roboter problemlos andocken kann. Es kann sein, dass je nachdem wie genau euer…
Two types of Z50 and Z60 cogwheels for use with fischertechnik. The cogs will mount with the regular nr 31014 or 31015 hubs to a 4mm axle. To make it easier to print without support, I also added the models with one flat, non-faceted…
This is a zoom gear for a Nikon Z mount 16-50 lens, for use inside the Nauticam Z50 housing. This design will require a M3 screw and M3 nut to secure the gear to the lens. Print instructions Category: Camera Summary This is a zoom gear…
Want to use your Optoma UHZ50 on top of a tall shelf in the upside-down orientation without having to drill holes and mount the projector on the ceiling? Then this stand is for you. If you like what I'm doing, please give it a like 👍…
What is that? Intake manifold / carburetor gasket #09 for Honda Z50 Monkey. Fits the original Honda 16100-165-924 carburetor. I printed mine in PETG and the other option in TPU. Both materials are equally suitable. When using TPU, no…
I have the same power supplies but 6.3A each. They are longer than in original design. I've created elongated version for the back part. Also I've put different type of switch and plug as well as place for the fan 3010.
Should be printed with PC and 0.25 nozzle, i used 5 perimeter and gyroid infill. The module for the gear is 0.8 and it has 21 teeth.
Just a few parts I made while working on a CRF50F. It is two handle bar end fillers to reduce help the grips survive a fall without having a hold punched in the end of them. I also add a small bushing between the rear brake pedal pivot…
This is a holder for the cross slide for the watchmakers lathe CZ50 by Michael Chung. It holds the cross slide safely when not in use.
Chip tray for watchmakers lathe CZ50, there is a left hand model which fits closely to the headstock, then repeat models which nest together, can print as many of these as you need.
Tailstock holder for CZ50 watchmakers lathe, holds it safely when not in use.
Quick change tool holder for CZ50 watchmaker lathe. One part is a flat holder for the quick change tool holders, the other is a 45 degree angle block which can either rest on the desktop or hook over small French Cleat. Can be remixed to…
Milling attachment holder for CZ50 watchmakers lathe, holds it as well as a ER collet wrench and a small number of collets.
tailstock camera holder for the CZ50 watchmakers lathe by Michael Chung. This holds the tailstock microscope / camera when not in use. It is designed to be used with a small French cleat system, but can be easily remixed to have fixing…
Great option when your battery door breaks off on your NIKON Z50. Will need to drill hole in appropriate place
Milling chip guard for the CZ50 watchmakers lathe by Michael Chung. Goes on the headstock when milling to stop chips going towards the stepper motor.
1:1 replacements for the legs on the Logitech Z506 Subwoofer. You can reuse the original screws to mount them. I recommend printing them with PETG, but feel free to print it with anything you want, the shape is fairly simple. The examples…
Quick change holder for the CZ50 lathe, remixed to fit in a 1x4 gridfinity bin.
The full casing for the Z500. There are 2 versions of the upper casing. One with a window to let the LEDs shine through if using an opaque material. Another without the window if using a transparent material.
What is that? Intake manifold / carburetor gasket #09 for Honda Z50 Monkey. Fits the original Honda 16100-165-924 carburetor. I printed mine in PETG and the other option in TPU. Both materials are equally suitable. When using TPU, no…
Subwoofer electronics into a compact custom enclosure for smaller size, utilizing a 3.5mm jack for an external sub.
File STL ad alta precisione per la stampa 3D della carena laterale della Kawasaki Z500. Questo modello nasce da un accurato processo di reverse engineering effettuato sul pezzo originale. Le geometrie, gli spessori e, soprattutto, i fori…
