Counting matching models…
Remixed the rugged box by @Whity / @Yanev to fit a Bosch Zamo. The box is smaller than the original packaging and of course more rugged. It has a little compartment for things. Printed in PETG. You will need 6 pieces M3 x 30 screws for…
Print approx. €6.72–€8.21 excl. taxPreliminary estimate for PETGSource material: PET
I like the model from Hatrick 3D (thanks) but I wanted it for my Ikea Skadis wall so I added appropriate brackets. Printed in PLA 30% infill supports on the print bed. Ich mag das Modell von Hatrick 3D (danke), aber ich wollte es für…
Add some European ambiance to your room or Christmas village with the historic city hall building from Zamosc, Poland. Designed to hold two LED tea lights or a small flash light underneath. Not to be used with real flame tea lights as…
Pyxis of Zamora The Pyxis of Zamora is a cylindrical carved ivory box commissioned in 964 CE by the Umayyad caliph Al-Hakam II for Subh, his concubine and the mother of his heirs, Princes Abd al-Rahman and Hishâm. Produced in the palatine…
Remixed Scijoe's Zamo box to fit within TheSameNameTwice's Parametric Box since i use the box for many other things.
This is a box for the Bosch Zamo 3rd Gen laser measure and its 3 accessories (tape, wheel and line adapter). The lid snaps on firmly and the parts are easy to take out. After i printed my box i added a little cutout to the pocket of the…
I printed mine with 0.6mm nozzle @0.3mm layer height. The model is WITHOUT the logo since I didn't make the logo, it can be found in the original post and just add it where you want in PrusaSlicer.
Solid 3d model of historic Ratusz (City Hall) located in Zamosc, Poland. Check out my other Polish models collection. Sprawdź moją kolekcję innych polskich modeli. https://www.printables.com/@m_collectable/collections/2722761
This is a remix of Skadis Holder Bosch Zamo by Lansolo81 modified to be mounted with T-Nuts . I always prefer using this system in M2.5 or M3 to avoid any movement, so both options are available. A vertical alignment guide is directly…
Simple holder for your Bosch Zamo laser. Prints with supports on buildplate only.
Really good fitted for Bosch Zamo newer version digital laser measure
This is remixed to include cutouts for holding the Dremel/Bosch Laser Measuring tool and its accessories. It is also adapted to have another hole for a small tether and utilizes 6x m3-20 screws.
I create a box for a laser rangefinder Bosch Zamo. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Filament: Amazon Basic PLA Category: Tool Holders & Boxes
2x3 Gridfinity, Height: 5u To make it stackable, you need a Spacer - 2x3x750 Should also fit the Dremel Cordless 3 in 1 Digital Laser Measurer HSLM-01 .
A Zamorak Godsword from Runescape 3 Category: Video Games
This is a holder for the BOSCH Zamo (2. Gen) Laser Measuring Tool to attach it to the Honeycomb STorage Wall by RostaP.
Prints like the original Rugged Box. No supports needed. The seal should be printed in TPU. I didn't print it, but uploaded it because it comes with the original model. Note that the batteries aren't attached properly. Should have added a…
Print vertically.
Printed in PLA without support. Holes on the side for threaded inserts to put clips for mounting on IKEA Skadis pegboard. This is pending item, I might add it later on this model.
Key cover / holder, 6mm wide and 2mm thick. Osłona / zamocowanie klucza o szerokości 6mm i grubości 2mm
Print the pieces in the original position, without supports. I use -0.11mm in Expasion of material (Cura) The threads are inverted to prevent loosening with the use of the ratchet. Imprimir las piezas en la posición original, sin…
Bosch zamo laser distancemeter tool holder
This tray holds a BOSCH Zamo III and can be mounted on IKEA Skadis . I didn't really search for an existing solution, instead I built my own. I tried printing it turned 13° without support on my P1S, but it ended up in misaligned layers.…
Needed a holder for my wheel adapter so i remixed the holder for the HSW bosch Zamo Laser holder
This is a little cap to cover the optics of the Bosch Zamo laser rangefinder. Should be printed standing on the top of the cap, so no support is required. I did well with .2mm layer height and PLA. Should work with pretty much everything…
HSW holder for bosch zamo laser measure
A simple and easy to print cover to protect the pins of the adapters (e.g. the wheel adapter ) for the Bosch Zamo laser measure tool .
Bosch Laserentfernungsmesser Zamo Skadis Holder Halterung für den Laserentfernungsmesser für die von Ikea Skadis Wand
A case i made for my grandpas Zamo 3
Gizamon Digimon Creature Model
Náhradný diel za zlomené časti. Material PLA/PETG Perimetry: 2 infill: 20-100% (small part)
Gridfinity 1x3 Box for Bosch Zamo & AAA Batteries This is a customized Gridfinity 1x3 storage box , designed to hold a Bosch Zamo laser measure and two AAA batteries . It keeps everything neatly organized and easily accessible — perfect…
Ikea skådis holder for Bosch Zamo Accessories. This holder is made to work with @Kim-Janosch's universal peg . I will fit 3 Adapters, and is tested with the; Zamo - Line Adapter, Zamo - Wheel Adapter and Zamo - Tape Adapter. The holder is…
Case for protect the Zamo Wheel
easy cover for outdoor lock - petg 0,4 nozzle
Key cover / holder, 6mm wide and 2mm thick. Osłona / zamocowanie klucza o szerokości 6mm i grubości 2mm
Solid 3d model of historic Ratusz (City Hall) located in Zamosc, Poland. Check out my other Polish models collection. Sprawdź moją kolekcję innych polskich modeli. https://www.printables.com/@m_collectable/collections/2722761
Bosch Laserentfernungsmesser Zamo Skadis Holder Halterung für den Laserentfernungsmesser für die von Ikea Skadis Wand
3D printable topographic miniature of Zamora - 🇪🇸 Spain Capture the beauty of Zamora 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 41.503, -5.744 (LatLng) . It…
![[REMIX] Rugged box for Bosch Zamo Laser Measue](https://media.printables.com/media/prints/663548/images/5225882_39d18197-5171-412f-9129-d04d28ebab76_f8887cff-ee0e-431b-958d-4d0c448cf769/pxl_20231129_113306422.jpg)
