Counting matching models…
Compatible with Zooz 700 Series Z-Wave Plus Open/Close Sensor ZSE41 for Door, Window, and Gate Monitoring …instead of using the double-stick tape to mount it, this mount requires two screws, and allows the sensor body to be slid up or the…
Updated bracket to deflect rain/snow away from the sensor. You can use the original adhesive or a nail/screw to attach to your fence gate or whatever. PLA and PETG print fine, but consider the color and location if it will be in direct…
This mount for the Zooz ZSE41 contact sensor snaps onto a 20mm x 20mm metal bar. The metal bar may move up and down, thus, the magnet and contact sensor cannot be fixed on the structures. The bar will move down by 4" on occasion which…
This model was created to allow the Zooz ZSE41 Open-Close XS Sensor to be mounted using screws instead of sticky adhesive tape. It also fits the holes left behind from a SecurityMan alarm installation. This model was printed with PETG.…
Updated bracket to deflect rain/snow away from the sensor. You can use the original adhesive or a nail/screw to attach to your fence gate or whatever. PLA and PETG print fine, but consider the color and location if it will be in direct…
One of my sensors is too far away from the controller to allow for successful firmware updates, even though it works great in normal operation. Since the board is mounted to the part that is adhered to the door/frame, it doesn't support…
