Magnetic clothing button for 4mm magnets - cosplay etc
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds 2x 4mm magnets and has holes for hand sewing thread through.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 124
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Costume Accessories
- Licencja
- Creative Commons — Public Domain
This is button which holds two magnets (I used bambu 4 mm diameter, 2 mm thick magnets) which when made in a pair will join together instantly and hold with an amount of force. Useful for keeping cosplay clothing layers in place or accessories positioned correctly. You can set each magnet to face the same direction, or opposing directions, for different purposes.
Worked fine in PLA with 0.4 mm nozzle, 0.2 mm layer height.
To assemble:
- Print at least 2 buttons
- Push magnets into spaces, firmly using a hard object to ensure they are flush
- Test the pair of buttons to ensure the magnet orientations are good
- Place a small amount of super glue over the top of the magnets and the button. (I found it was better to place it on top, not inside at the base of the magnet.)
If you download the .3mf file for bambu studio you can edit the 4 negative torus position/sizes which produce the sewing holes.